The foragers of the southern African Middle Stone Age were among the first humans to adapt their environment and its resources to their needs. They heat-treated stone to alter its mechanical properties, transformed yellow colorants into red pigments and produced moldable adhesive substances from plants. Until now, only Podocarpus conifers have been identified as the botanical origin of Middle Stone Age adhesives. This is curious as these conifers do not produce sticky exudations that could be recognized as potential adhesives. To obtain an adhesive, tar must be made with a technical process based on fire. However, the nature of these technical processes has remained unknown, hampering our understanding of the meaning of this adhesive technology for the cultural evolution of early Homo sapiens. Here, we present the first evidence of a technique used for tar making in the Middle Stone Age. We created an experimental reference collection containing naturally available adhesives along manufactured tars from plants available in the Middle Stone Age and compared these to artifacts using gas chromatography-mass spectrometry and infrared spectroscopy. We found that, in the Howiesons Poort at Sibhudu Cave, tar was made by condensation, an efficient above-ground process. Even more surprisingly, the condensation method was not restricted to Podocarpus. The inhabitants of Sibhudu also produced tar from the leaves of other plants. These tars were then used, either without further transformation or were processed into ochre-based compound adhesives, suggesting that people needed different moldable substances with distinct mechanical properties. This has important implications for our understanding of Middle Stone Age H. sapiens, portraying them as skilled engineers who used and transformed their resources in a knowledgeable way.

In this study, we adopt an interdisciplinary approach, integrating agronomic field experiments with soil chemistry, molecular biology techniques, and statistics to investigate the impact of organic residue amendments, such as vinasse (a by-product of sugarcane ethanol production), on soil microbiome and greenhouse gas (GHG) production. The research investigates the effects of distinct disturbances, including organic residue application alone or combined with inorganic N fertilizer on the environment. The methods assess soil microbiome dynamics (composition and function), GHG emissions, and plant productivity. Detailed steps for field experimental setup, soil sampling, soil chemical analyses, determination of bacterial and fungal community diversity, quantification of genes related to nitrification and denitrification pathways, measurement and analysis of gas fluxes (N2O, CH4, and CO2), and determination of plant productivity are provided. The outcomes of the methods are detailed in our publications (Lourenço et al., 2018a; Lourenço et al., 2018b; Lourenço et al., 2019; Lourenço et al., 2020). Additionally, the statistical methods and scripts used for analyzing large datasets are outlined. The aim is to assist researchers by addressing common challenges in large-scale field experiments, offering practical recommendations to avoid common pitfalls, and proposing potential analyses, thereby encouraging collaboration among diverse research groups.•Interdisciplinary methods and scientific questions allow for exploring broader interconnected environmental problems.•The proposed method can serve as a model and protocol for evaluating the impact of soil amendments on soil microbiome, GHG emissions, and plant productivity, promoting more sustainable management practices.•Time-series data can offer detailed insights into specific ecosystems, particularly concerning soil microbiota (taxonomy and functions).

The detection of trace levels of organic residue in water samples is a key health issue. This manuscript describes the fabrication of integrated nano-sensors composed of electrospun microfibers consisting of a nanocomposite of carbonaceous materials (CNMs) containing polyaniline (PANI) and polycaprolactone (PCL) for phenolic detection in aqueous solutions. The morphology of the resulting microfiber composite was characterized by scanning electron microscopy. It revealed elongated fibers with a highly interconnected web-like pattern in the presence of reduced graphene oxide (rGO). Shorter microfibers were observed in the composite filled with multi-walled carbon nanotubes (MWCNTs), whereas large agglomerates were formed upon the incorporation of single-walled CNTs (SWCNTs) and graphene 300 (G300). Comparative analysis showed that the PANI/CNM sensors exhibited the best electrochemical properties, in particular in the presence of rGO and MWCNTs, where greater electrical conductivity was achieved, i.e., 4.33 × 10-3 and 7.22 × 10-4 S/cm, respectively, as compared to the PANI-PCL sensor (3.79 × 10-4 S/cm). All the PANI/CNM sensors exhibited high sensitivity. Notably, PANI/rGO was found to have a detection limit of 8.34 × 10-3 µM for aminophenol. All the sensors exhibited good selectivity in the presence of interference to detecting phenolic compounds in aqueous solutions, thus confirming their value for industrial applications.

Ceramic objects account for over 90% of the cultural material recovered from archaeological sites in the Caribbean. However, little research has been conducted on molecular evidence for past food production from these same vessels. Forty ceramic sherds from Isla de Mona have been analysed by GC-MS and GC-C-IRMS in order to address questions surrounding foodways in the Greater Antilles prior to and post European arrival. We evaluate evidence for dietary changes to illuminate aspects of cultural exchange between Indigenous populations and the first generations of Spanish colonists. Here, we show that plant residues are found in a variety of pottery forms, with some evidence for non-ruminant and ruminant fats. The dearth of marine biomarkers is curious given the volume of fish bones found in archaeological contexts on Isla de Mona and may offer evidence for spit-roasting, pit-roasting, or the use of a \'barbacoa\' to cook fish on the island. The ubiquity of plant residues in a variety of pottery forms may relate to the large-scale cultivation and export of cassava (Manihot esculenta) from the island. A Spanish olive jar revealed evidence of wine residues, which may constitute the earliest detection of wine residues in pottery found in the Americas.
UNASSIGNED: The online version contains supplementary material available at 10.1007/s12520-023-01771-y.

This study investigates the impact of different agro-industrial organic wastes (i.e., sugarcane filter cake, poultry litter, and chicken manure) on the bacterial community and their relationship with physicochemical attributes during composting. Integrative analysis was performed by combining high-throughput sequencing and environmental data to decipher changes in the waste microbiome. The results revealed that animal-derived compost stabilized more carbon and mineralized a more organic nitrogen than vegetable-derived compost. Composting enhanced bacterial diversity and turned the bacterial community structure similar among all wastes, reducing Firmicutes abundance in animal-derived wastes. Potential biomarkers indicating compost maturation were Proteobacteria and Bacteroidota phyla, Chryseolinea genus and Rhizobiales order. The waste source influenced the final physicochemical attributes, whereas composting enhanced the complexity of the microbial community in the order of poultry litter > filter cake > chicken manure. Therefore, composted wastes, mainly the animal-derived ones, seem to present more sustainable attributes for agricultural use, despite their losses of C, N, and S.

A soil that was historically contaminated with Aqueous Film Forming Foam (AFFF) was dry sieved into size fractions representative of those produced during soil washing. Batch sorption tests were then conducted to investigate the effect of soil parameters on in situ per- and polyfluoroalkyl substances (PFAS) sorption of these different size fractions: < 0.063 mm, 0.063 to 0.5 mm, 0.5 to 2 mm, 2 to 4 mm, 4 to 8 mm, and soil organic matter residues (SOMR). PFOS (513 ng/g), 6:2 FTS (132 ng/g) and PFHxS (58 ng/g) were the most dominant PFAS in the AFFF contaminated soil. Non-spiked, in situ Kd values for 19 PFAS ranged from 0.2 to 138 L/Kg (log Kd -0.8 to 2.14) for the bulk soil and were dependant on the head group and perfluorinated chain length (spanning C4 to C13). The Kd values increased with decreasing grain size and increasing organic carbon content (OC), which were correlated to each other. For example, the PFOS Kd value for silt and clay (< 0.063 mm, 17.1 L/Kg, log Kd 1.23) were approximately 30 times higher compared to the gravel fraction (4 to 8 mm, 0.6 L/Kg, log Kd -0.25). The highest PFOS Kd value (116.6 L/Kg, log Kd 2.07) was found for the SOMR fraction, which had the highest OC content. Koc values for PFOS ranged from 6.9 L/Kg (log Koc 0.84) for the gravel fraction to 1906 L/Kg (log Koc 3.28) for the silt and clay, indicating that the mineral composition of the different size fractions also influenced sorption. The results here emphasize the need to separate coarse-grained fractions and fine-grained fractions, and in particular the SOMR, to optimize the soil washing process. Higher Kd values for the smaller size fractions indicate that coarser soils are better suited for soil washing.

This study aimed to evaluate the effects of untreated pig manure from diets incorporating growth-promoting supplements (antibiotics and Zn oxide) on the survival and reproduction of Eisenia andrei earthworms. The tested manures were obtained from four different groups of pigs fed with four different diets: CS, a diet based on corn and soymeal; TR, a diet based on corn, soymeal, and ground wheat (15%); CSa, a diet based on corn and soymeal + 100 ppm of doxycycline + 50 ppm of colistin + 2500 ppm of Zn oxide; and TRa, a diet based on corn, soymeal, and ground wheat (15%) + 100 ppm of doxycycline + 50 ppm of colistin + 2500 ppm of Zn oxide. The study used two soils representative of the Southern region of Brazil (Oxisol and Entisol). In general, there were no significant differences between the different manures tested in each soil. However, there were differences in the toxicity manure on E. andrei between the soils, and the magnitude of this effect was dependent on the applied dose. In Oxisol, LC50 values were higher than 80 m3 ha-1, and EC50 varied from 9 to 27 m3 ha-1. In Entisol, the LC50 values were below the lowest dose tested (< 25 m3 ha-1), and EC50 remained around 5 m3 ha-1. It may be possible that the effects observed were attributed to an excess of nitrogen, copper, and zinc, promoted by the addition of the untreated manure and how these factors interacted with soil type.

Multiple analytical techniques were combined to achieve a detailed characterization of organic residues in different typologies of funerary pottery, which were found at two separate archeological sites in the Campania Region (Italy) and both dated back to the first millennium BC. Gas chromatography-mass spectrometry (GC-MS) analysis of lipids provided inconclusive results. The attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra of encrustation on two glazed bowls of the 3rd to 4th century BC were comparable to those of fresh bone, revealing the presence of hydroxyapatite and proteins, which were identified as bovine collagen chains by liquid chromatography coupled to high-resolution tandem mass spectrometry (LC-MS/MS)-based proteomics. This finding confirmed that Italic populations used to inhume the dead along with votive meat offerings. Proteomics was decisive for identifying bovine milk in an unusually shaped amphora unearthed from a grave that belonged to a woman at the necropolis of the Greek colony in Cuma (7th century BC). Peptidomic analysis demonstrated that the genetic variant A1 of β-casein was already present in the southern Mediterranean area at least 2500 years ago. Overall, these results depict an agropastoral system of Italic populations at the age of Magna Graecia based on a significant role of domesticated cattle.

The use of pesticides presents a risk to terrestrial and aquatic ecosystems. For this reason, the development of strategies to prevent and restore pollution is of the greatest interest, including the adsorption to organic matter. The aim of the present study was to investigate the sorption/desorption and kinetics of atrazine, chlorfenvinphos, endosulfan sulfate, and trifluralin onto several raw organic wastes by batch experiments. Three kinetic models were used to fit the obtained sorption kinetics data and two to fit the obtained adsorption isotherm data; both the Freundlich and pseudo-second-order kinetic models described the sorption isotherms well. The desorption study revealed hysteresis in all cases, showing strong, and not completely reversible, adsorption in most cases, with the exception of atrazine-sawdust and chlorfenvinphos-sawdust and chicken manure combinations, for which responses were weak and irreversible. The best kinetic, adsorption and desorption constants were achieved for the hydrophobic pesticides. With respect to sorption-desorption rates, orujillo was found to be the best adsorbent for atrazine, while composted urban solid waste was more suitable for trifluralin and endosulfan sulfate. Sorption constants and simple correlations indicated that, not only the organic matter content, but also the nature of the organic matter itself, and the pesticide and adsorbent properties, determine pesticide sorption-desorption. The use of wastes as efficient and cheap adsorbents for reducing the risk of pesticide pollution is proposed.

Meeting global water quality standards is a real challenge to ensure that food crops and livestock are fit for consumption, as well as for human health in general. A major hurdle affecting the detection of pollutants in water reservoirs is the lapse of time between the sampling moment and the availability of the laboratory-based results. Here, we report the preparation, characterization, and performance assessment of an innovative sensor for the rapid detection of organic residue levels and pH in water samples. The sensor is based on carbonaceous nanomaterials (CNMs) coated with an intrinsically conductive polymer, polyaniline (PANI). Inverse emulsion polymerizations of aniline in the presence of carbon nanotubes (CNTs) or graphene were prepared and confirmed by thermogravimetric analysis and high-resolution scanning electron microscopy. Aminophenol and phenol were used as proxies for organic residue detection. The PANI/CNM nanocomposites were used to fabricate thin-film sensors. Of all the CNMs, the smallest limit of detection (LOD) was achieved for multi-walled CNT (MWCNT) with a LOD of 9.6 ppb for aminophenol and a very high linearity of 0.997, with an average sensitivity of 2.3 kΩ/pH at an acid pH. This high sensor performance can be attributed to the high homogeneity of the PANI coating on the MWCNT surface.