BACKGROUND: The purpose of this pilot in-vitro study was to assess the effect of sterilization on the intra-implant axis, inter-implant axis, intra-implant distance and inter-implant distance of three implants in a straight line by using laboratory scanner (LBS) versus intra-oral scanner (IOS) with intra-oral scan bodies (ISB).
METHODS: A printed 3D model with three internal hex analogs in the positions 15#,16#,17# was used. Zirkonzhan (ZZ) intra-oral scan body (ISB), two-piece titanium was used. The ZZ ISBs were scanned by 7 Series dental wings (LBS) and 30 times by Primescan (IOS) pre sterilization and 30 times post sterilization. For each scan (pre and post) stereolithography (STL) file was created and a comparison between all the scans pre sterilization and post sterilization were superimposed on the laboratory scan by using a 3D analyzing software. A Kolmogorov-Smirnov test performed followed by Wilcoxon Signed Ranks tests. (p < 0.05) Results: Post sterilization of the ZZ ISB, the mean errors were significantly increased for the inter-implant distances (p < 0.0005), intra-implant distances 1,2,3 (p < 0.0005), intra-implant axis 1,3 (p < 0.0005) and inter-implant axes 13,23 (p < 0.05). In contrast, the mean errors for intra-implant axis 2 (p < 0.0005) and inter-implant axis 12 (p < 0.0005) were significantly reduced.
CONCLUSIONS: ZZ ISB showed changes in all four parameters after sterilization. The middle ISB had the largest changes in mean error regarding all four parameters. Sterilization process may affect the three-dimensional (3D) structure of the ZZ ISB after three cycles. There is a lack in the literature in this field and there is a need for further studies to explore the effect of sterilization (multiple cycles) on different ISBs and for creating an approved guidelines regarding the amount of sterilization for each ISB in the industry.

OBJECTIVE: This study used a Delphi survey to define the concept of oral function rehabilitation exercise (OFRE) based on the International Classification of Functioning, Disability, and Health (ICF) and to categorise intervention domains for community-dwelling older adults.
BACKGROUND: While numerous studies have been conducted to improve oral function through exercise interventions, the conceptual definition of oral exercise remains unclear and there is a lack of systematic categorisation of oral exercise intervention domains.
METHODS: A preliminary model was developed based on the key findings of 19 papers selected from a prior systematic review. Its validity was confirmed through a Delphi survey conducted twice with eight expert panellists. Consensus was achieved by evaluating the validity of the OFRE conceptual framework, the accuracy of OFRE conceptual definitions, and intervention domains.
RESULTS: Through expert consensus, an ICF-based OFRE conceptual framework was developed that includes 21 factors that affect the oral health status of the older adults. The OFRE intervention domain for improving the health status consisted of oral function rehabilitation warm-up exercise, masticatory function exercise, swallowing function exercise, articulatory function exercise, salivary function exercise, and oral function rehabilitation cool-down exercise, and 11 specific intervention methods were derived.
CONCLUSIONS: The OFRE intervention can be used for planning and applying successful interventions to improve oral function and life function of older adults.

The advent of digital workflows has revolutionized oral rehabilitation, offering excellent prosthesis and restoration adaptation while reducing work time. This case report aims to describe a full-arch rehabilitation protocol using mucosa-supported prostheses through a digital workflow. The technique begins with scanning the upper jaw and taking an impression of the lower jaw, followed by scanning to create a digital cast. Next, border molding and the final impression of both arches are performed using a closed-mouth technique, during which the patient is guided to perform lateral and protrusive movements. Subsequently, intraoral scanning of the occlusion and both impressions is conducted, leading to the design of the final dentures with the established occlusion. Finally, the dentures are printed in Formlabs resin specifically designed for dentures. The digital workflow facilitates the manufacturing of mucosa-supported full-arch prostheses effectively. This method allows for the adjustment of the vertical dimension of occlusion, ensures excellent adaptation of the prosthesis to the soft tissues, and provides aesthetic satisfaction for the patient. Additionally, it reduces the number of sessions required to install the definitive prosthesis.

UNASSIGNED: To describe the existing knowledge about metal-free prosthetic biomaterials according to their physicochemical properties and based on this, define criteria for their placement in both the anterior and posterior sectors.
UNASSIGNED: A digital search was carried out in the databases: PubMed/Medline, Scopus, Web of Science and Google Scholar of the literature published in the English language without time restrictions and included original articles such as case reports, retrospective and prospective studies, narrative, comprehensive, systematic reviews and meta-analysis. Meanwhile, short communications, editorials and articles in a language other than English were excluded.
UNASSIGNED: 40 articles were evaluated, published between 2000 and 2023. The main characteristics and physicochemical properties of ceramic biomaterials such as zirconia, feldspathic based ceramics, lithium disilicate and alumina, among others, were analyzed and summarized. In addition, certain criteria were defined based on the available scientific evidence on the use of different ceramic systems both in the anterior sector and in the posterior sector for patients who need some type of prosthetic restoration.
UNASSIGNED: Among the different metal-free materials used for the construction of fixed dental prostheses, zirconia has been shown to have better aesthetic, biomechanical and biocompatibility properties, which makes it a candidate material for the rehabilitation of partially edentulous patients.
UNASSIGNED: Describir el conocimiento existente sobre los biomateriales protésicos libres de metal, según sus propiedades fisicoquímicas, y definir, con base en ello, criterios para su colocación tanto en el sector anterior como en el posterior.
UNASSIGNED: Se realizó una búsqueda digital en las bases de datos PubMed/Medline, Scopus, Web of Science y Google Scholar de la literatura publicada en idioma inglés, sin restricciones de tiempo. Se incluyó artículos originales como reportes de casos, estudios retrospectivos y prospectivos, revisiones y metanálisis narrativos, exhaustivos y sistemáticos. Por otra parte, se excluyeron comunicaciones breves, editoriales y artículos en idioma distinto al inglés.
UNASSIGNED: Se evaluaron 40 artículos, publicados entre 2000 y 2023. Se analizaron y resumieron las principales características y propiedades fisicoquímicas de biomateriales cerámicos, como circonia, cerámicas de base feldespática, disilicato de litio y alúmina, entre otros. Además, se definieron ciertos criterios basados en la evidencia científica disponible sobre el uso de diferentes sistemas cerámicos, tanto en el sector anterior como en el posterior, para pacientes que necesitan algún tipo de restauración protésica.
UNASSIGNED: Entre los diferentes materiales libres de metales utilizados para la construcción de prótesis dentales fijas, la circonia ha demostrado tener mejores propiedades estéticas, biomecánicas y de biocompatibilidad, lo que la convierte en un material candidato para la rehabilitación del paciente parcialmente edéntulo.

BACKGROUND: Occlusal contacts can be stained and thereby visualised employing occlusal indicators. Qualitative and quantitative indicators are differentiated. The hybrid system OccluSense supposedly combines analogue contact marking and digital registration of contacts. The reliability and validity of its contact marking have not yet been validated.
OBJECTIVE: The aim of this controlled randomised in-vitro study was to examine the reliability and validity of analogue contact staining with OccluSense compared to Arti-Fol and the reference standard Gnatho-Film.
METHODS: An experimental apparatus was designed to simulate static occlusion. The occlusal contacts were stained 50 times with Gnatho-Film to determine the average number and location of contacts registered. For comparison, the contacts were pre-stained with Gnatho-Film and then registered with Arti-Fol or OccluSense 50 times each. Every staining was statistically evaluated and compared to Gnatho-Film alone, regarding the number and location of contacts. Based on the observed characteristic staining behaviour of OccluSense, a modified evaluation strategy was developed for its colour markings (OccluSense (mod.)).
RESULTS: Both evaluations of OccluSense determine that the same number of contacts was registered in over 94% of all cases. Neither OccluSense nor Arti-Fol stain the exact same number of contacts as Gnatho-Film, but the modified evaluation OccluSense (mod.) did improve the results for validity.
CONCLUSIONS: When employing the modified evaluation strategy, OccluSense staining achieves similar reliability and validity as the reference standard. Pre-colouring of occlusal contacts with Gnatho-Film and the modified evaluation strategy, might become standard for analysing occlusal contacts stained by OccluSense in the future.

OBJECTIVE: To evaluate the survival rate of minimally invasive semipermanent occlusal polymethylmethacrylate (PMMA) onlays/veneers in previous temporomandibular disorder (TMD) patients with severe tooth wear and with a loss of vertical dimension after up to 7 years.
METHODS: This case series was designed as a follow-up evaluation with consecutive patient recruitment. All patients bearing the indication for this kind of rehabilitation were treated by the same clinician using the same adhesive methodology. The study included 22 patients (3 males/19 females), with a mean [SD] age of 50.7 [11.6] years. Controls followed within the first 4 weeks (and subsequently as required). Failure criteria included damage by fracture, chipping, and retention loss. Survival rates were determined based on the Kaplan-Meier analysis.
RESULTS: 328 semipermanent occlusal/incisal veneers were included (142 maxillary/186 mandibular teeth). Almost 80% of the restorations were in place and in function when starting the follow-up treatment after 180 days; failures predominantly occurred within the first 3 to 6 months but proved reparable. Depending on the patients\' priorities, scheduled replacements followed successively, and more than 65% did not show repair or any renewal needs for more than 360 days.
CONCLUSIONS: Within the limitations of this study the survival rates of occlusal veneers made of PMMA were sufficiently high to allow for consecutive treatment of the respective teeth by means of permanent restorations while preserving the restored vertical dimension. In patients with severe tooth wear and a TMD history, semipermanent restorative therapy with occlusal PMMA onlays/veneers would seem a noteworthy option.

Vertical dimension (VD) is a critical factor in prosthodontics, playing a pivotal role in the functional and aesthetic outcomes of dental treatments. This literature review explores theoretical foundations and the various aspects of VD, including its definition, measurement, and clinical significance in prosthodontics. The relationship between VD and temporomandibular disorders (TMDs) is examined. Additionally, the impact of VD on facial proportions and aesthetics is significant, as it affects the lower third of the face and influences the patient\'s overall appearance and self-esteem. In conclusion, understanding the intricate relationship between VD, TMDs, facial aesthetics, and psychological well-being is essential for effective prosthodontic treatment. This comprehensive review provides valuable insights into the multifaceted role of VD in enhancing both functional and aesthetic outcomes, ultimately improving patient satisfaction and quality of life.

BACKGROUND: Atrophic edentulous maxilla is a debilitating condition caused by the progressive and irreversible bone resorption following loss of teeth, that results in bone of inadequate volume and density. This makes conventional implant therapy extremely challenging without complex reconstructive procedures. Several techniques such as sinus augmentation, short implants, and tilted implants have been used for the rehabilitation of the atrophic maxilla. In recent years, zygomatic implants have emerged as a graftless rehabilitation technique. However, few studies compare zygomatic-implant fixed rehabilitation with other fixed rehabilitation techniques. The existing body of evidence on zygomatic implants is largely based on clinical and disease-oriented outcomes.
METHODS: A network meta-analysis (NMA) will be conducted in order to compare the effectiveness of zygomatic-implant fixed rehabilitation with the other rehabilitation techniques. Experimental and observational studies comparing different implant-assisted fixed rehabilitation in adults with atrophic maxilla will be included. The primary and secondary outcomes will be patient\'s satisfaction and quality of life respectively. Additional outcomes include the implant\'s survival/success, and biological and prosthetic complications. An electronic search will be performed through various databases for articles in English and French, without time limits. Risk of bias will be assessed using the Revised Cochrane Risk-of-Bias tool for randomized controlled trials, and ROBINS-I for non-randomized and observational studies. Two independent reviewers will screen the titles and abstracts and extract data. Any discrepancy between reviewers will be discussed and resolved through consensus or with the help of a third reviewer. Pairwise meta-analyses will be performed using a random effects model. I2, τ2, transitivity, subgroup/meta-regression analyses will assess and explain heterogeneity and distribution of effect modifiers. A network plot will be created to connect the different interventions directly and indirectly. Interventions will be ranked using the surface under cumulative ranking curve. Confidence in the results of the NMA will be assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE).
CONCLUSIONS: This study will be the first to assess the effectiveness of zygomatic-implant fixed rehabilitation for the atrophic maxilla using NMA. The evidence obtained will aid clinical decision-making and will advance the knowledge of the rehabilitation techniques for the atrophic maxilla.
BACKGROUND: PROSPERO CRD42023353303.

BACKGROUND: Pain-free bite force (PFBF) is a promising measure to evaluate bite function in temporomandibular disorders (TMDs), yet the reliability of the measure is unknown.
OBJECTIVE: Establish the (1) within-session test-retest reliability of PFBF in a healthy population for a single and mean of three trials in supported and unsupported sitting; (2) standard error of measurement (SEM) and minimal detectable change (MDC).
METHODS: Thirty healthy participants (n = 15 female, mean [SD] age = 34.4 [11.0] years) completed two sessions (30-60 min apart) comprising three PFBF trials on each side, in both supported and unsupported sitting, to provide data for 60 (30 participants × two sides) test-retest assessments. Test-retest reliability for the first trial and mean of three trials in each position were determined using intraclass correlation coefficients (ICCs), before calculating the corresponding SEM and MDC for males (M) and females (F) respectively.
RESULTS: Within-session reliability was considered excellent for a single trial in supported sitting (ICC = 0.85; SEM M/F = 99/84 N; MDC M/F = 275/232 N) and unsupported sitting (ICC = 0.91; SEM M/F = 72/59 N, MDC M/F = 200/163 N), and for a mean of three trials in supported sitting (ICC = 0.89; SEM M/F = 66/79 N, MDC M/F = 182/220 N) and unsupported sitting (ICC = 0.92; SEM M/F = 64/59 N, MDC M/F = 177/164 N).
CONCLUSIONS: Single and a mean of three trials in supported and unsupported sitting appear reliable methods to measure PFBF in a healthy population. Testing PFBF using a mean of three trials in unsupported sitting appears superior over other methods though due to higher test-retest reliability, and lower SEM and MDC. Future studies should examine the reliability of PFBF in TMD populations.

Background: In this study, we aimed to compare the effects of conventional and digital impressions on several parameters (inter-implant distance, intra-implant distance, inter-implant axis, and intra-implant axis) of three implants in curved lines and straight lines by using a laboratory scanner (LBS) versus an intra-oral scanner (IOS). Methods: Two 3D models were fabricated using a printer, each model with three internal hex implants analogues at the positions of 15#,16#,17# (straight line) and 12#,13#,14# (curved line). Standard intra-oral scan bodies (ISBs) were used, and the two models were scanned using 7 Series dental wings (LBS, reference model), followed by ten scans with Primescan (digital method). Standard Tessellation Language (STL) files were created. Five polyether impressions were taken from each model (straight and curved), and gypsum type 4 models were poured; each model was scanned five times to create a total of 25 STL files for each group (conventional method). The comparison between all the STL files (conventional and digital) was made by superimposition of the STL files on the STL reference model laboratory file using a 3D analyzing software. A Kolmogorov-Smirnov test was performed, followed by Mann-Whitney tests and Wilcoxon signed-rank tests. (p < 0.05). Results: For the conventional method, the mean errors were significantly higher for the curved line model (12-14) compared to the straight line model (15-17) for most parameters (p < 0.05). For the digital method, the mean errors were significantly higher for the curved-line model (12-14) compared to the straight line model (15-17) in half of the parameters (p < 0.05). Within the curved line model (12-14) and the straight line model (15-17), the mean errors between the conventional method and the digital method were not significant for most variables. Conclusions: The difference between curved lines and straight lines has an impact on the mean error of the conventional method. Both methods are reliable for straight and curved lines in partially dentate situations.