Mo2CTx MXene materials, known for their high conductivity and abundant surface functional groups, are widely utilized as electrode materials in supercapacitors. However, their tendency to stack during electrochemical energy storage hinders their performance. The in situ growth of nanorod-shaped Ni,Co bimetallic metal-organic frameworks (Ni,Co-MOF) on Mo2CTx MXene effectively mitigates this stacking. With their porous structure and high specific surface area, MOFs excel in energy storage, and bimetallic MOFs outperform monometallic ones. The synergy between Mo2CTx MXene and Ni,Co-MOF yields an outstanding performance. In a three-electrode system with 1 M KOH, the Mo2CTx/Ni,Co-MOF composite shows a specific capacitance of 58 mAh g-1 (56.26 mAh cm-3) at 1 A g-1. When used in a Mo2CTx/Ni,Co-MOF//AC asymmetric supercapacitor, it achieves an energy density of 22.7 Wh kg-1(0.022 Wh cm-3) at a power density of 293 W kg-1 (0.284 W cm-3). Future work will focus on enhancing synthesis methods, exploring different bimetallic combinations, and optimizing electrode designs for gas sensors, batteries, fuel cells, biological sensors, and so on, with outstanding performance and sustainability.

The manganese-cobalt mixed oxide nanorods were fabricated using a hydrothermal method with different metal precursors (KMnO4 and MnSO4·H2O for MnOx and Co(NO3)2⋅6H2O and CoCl2⋅6H2O for Co3O4). Bamboo-like MnO2⋅Co3O4 (B-MnO2⋅Co3O4 (S)) was derived from repeated hydrothermal treatments with Co3O4@MnO2 and MnSO4⋅H2O, whereas Co3O4@MnO2 nanorods were derived from hydrothermal treatment with Co3O4 nanorods and KMnO4. The study shows that manganese oxide was tetragonal, while the cobalt oxide was found to be cubic in the crystalline arrangement. Mn surface ions were present in multiple oxidation states (e.g., Mn4+ and Mn3+) and surface oxygen deficiencies. The content of adsorbed oxygen species and reducibility at low temperature declined in the sequence of B-MnO2⋅Co3O4 (S) > Co3O4@MnO2 > MnO2 > Co3O4, matching the changing trend in activity. Among all the samples, B-MnO2⋅Co3O4 (S) showed the preeminent catalytic performance for the oxidation of toluene (T10% = 187°C, T50% = 276°C, and T90% = 339°C). In addition, the B-MnO2⋅Co3O4 (S) sample also exhibited good H2O-, CO2-, and SO2-resistant performance. The good catalytic performance of B-MnO2⋅Co3O4 (S) is due to the high concentration of adsorbed oxygen species and good reducibility at low temperature. Toluene oxidation over B-MnO2⋅Co3O4 (S) proceeds through the adsorption of O2 and toluene to form O*, OH*, and H2C(C6H5)* species, which then react to produce benzyl alcohol, benzoic acid, and benzaldehyde, ultimately converting to CO2 and H2O. The findings suggest that B-MnO2⋅Co3O4 (S) has promising potential for use as an effective catalyst in practical applications.

The prodigious employment of fossil fuels to conquer the global energy demand is becoming a dreadful threat to the human society. This predicament is appealing for a potent photocatalyst that can generate alternate energy sources via solar to chemical energy conversion. With this interest, we have fabricated a ternary heterostructure of Ti3C2 nanosheet modified g-C3N4/Bi2O3 (MCNRBO) Z-scheme photocatalyst through self-assembly process. The morphological analysis clearly evidenced the close interfacial interaction between g-C3N4 nanorod, Bi2O3 and Ti3C2 nanosheets. The oxygen vacancy created on Bi2O3 surface, as suggested by XPS and EPR analysis, supported the Z-scheme heterojunction formation between g-C3N4 nanorod and Bi2O3 nanosheets. The collaborative effect of Z-scheme and Schottky junction significantly reduced charge transfer resistance promoting separation efficiency of excitons as indicated from PL and EIS analysis. The potential of MCNRBO towards photocatalytic application was investigated by H2O2 and H2 evolution reaction. A superior photocatalytic H2O2 and H2 production rate for MCNRBO is observed, which are respectively around 5 and 18 folds higher as compared to pristine CNR nanorod. The present work encourages for the development of a noble, eco-benign and immensely efficient dual heterojunction based photocatalyst, which can acts as saviour of human society from energy crisis.

In the past two decades, the application of colloidal semiconductor-metal nanoparticles (NPs) as photocatalysts for the hydrogen generation from water has been extensively studied. The present body of literature studies agrees that the photocatalytic yield strongly depends on the electron donating agent (EDA) added for scavenging the photogenerated holes. The highest reported hydrogen production rates are obtained in the presence of ionic EDAs and at high pH. The large hydrogen production rates are attributed to fast hole transfer from the NP onto the EDAs. However, the present discussions do not treat the influence of EDA-specific surface interactions. This systematic study focuses on that aspect by combining steady-state hydrogen production measurements with time-resolved and static optical spectroscopy, employing 11-mercaptoundecanoic acid-capped, Pt-tipped CdSe/CdS dot-in-rods in the presence of a large set of EDAs. Based on the experimental results, two distinct EDA groups are identified: surface-active and diffusion-limited EDAs. The largest photocatalytic efficiencies are obtained in the presence of surface-active EDAs that induce an agglomeration of the NPs. This demonstrates that the introduction of surface-active EDAs can significantly enhance the photocatalytic activity of the NPs, despite reducing their colloidal stability and inducing the formation of NP networks.

Materials with pseudoelasticity can recover from large strains exceeding their elastic limits during unloading, making them promising damage-tolerant building blocks for advanced nanodevices. Nevertheless, a practical approach to realize controllable pseudoelastic behavior at nanoscale remains challenging. Here, we proposed a grain boundary (GB) engineering approach to endow metallic nanocrystals with a controllable pseudoelasticity. Both in situ nanomechanical testing and atomistic simulations demonstrate that such controllable pseudoelasticity is governed by the extension and contraction of an inherent stacking fault array at the GB. By precisely tuning GB misorientation and inclination, our simulation results reveal that metallic nanocrystals can exhibit tailored pseudoelastic performance across a broad spectrum of GBs in different face-centered cubic metals. These findings enrich our understanding of the intrinsic pseudoelasticity of GBs and provide a GB engineering approach toward metallic materials with reversible deformability.

Effective diagnostic tools for screening of latent tuberculosis infection (LTBI) are lacking. We aim to investigate the performance of LTBI diagnostic approaches using label-free surface-enhanced Raman spectroscopy (SERS). We used 1000 plasma samples from Northeast Thailand. Fifty percent of the samples had tested positive in the interferon-gamma release assay (IGRA) and 50 % negative. The SERS investigations were performed on individually prepared protein specimens using the Raman-mapping technique over a 7 × 7 grid area under measurement conditions that took under 10 min to complete. The machine-learning analysis approaches were optimized for the best diagnostic performance. We found that the SERS sensors provide 81 % accuracy according to train-test split analysis and 75 % for LOOCV analysis from all samples, regardless of the batch-to-batch variation of the sample sets and SERS chip. The accuracy increased to 93 % when the logistic regression model was used to analyze the last three batches of samples, following optimization of the sample collection, SERS chips, and database. We demonstrated that SERS analysis with machine learning is a potential diagnostic tool for LTBI screening.

Environmental pollution, such as water contamination, is a critical issue that must be absolutely addressed. Here, three different morphologies of tungsten-based photocatalysts (WO3 nanorods, WO3/WS2 nanobricks, WO3/WS2 nanorods) are made using a simple hydrothermal method by changing the solvents (H2O, DMF, aqueous HCl solution). The as-prepared nanocatalysts have excellent thermal stability, large porosity, and high hydrophilicity. The results show all materials have good photocatalytic activity in aqueous media, with WO3/WS2 nanorods (NRs) having the best activity in the photodegradation of bisphenol A (BPA) under visible-light irradiation. This may originate from increased migration of charge carriers and effective prevention of electron‒hole recombination in WO3/WS2 NRs, whereby this photocatalyst is able to generate more reactive •OH and •O2- species, leading to greater photocatalytic activity. About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO3/WS2 NRs and 5.0 mg/L BPA at pH 7.0. Additionally, the optimal conditions (pH, catalyst dosage, initial BPA concentration) for WO3/WS2 NRs are also elaborately investigated. These rod-like heterostructures are expressed as potential catalysts with excellent photostability, efficient reusability, and highly active effectivity in different types of water. In particular, the removal efficiency of BPA by WO3/WS2 NRs reduces by only 1.5% after five recycling runs and even reaches 89.1% in contaminated lake water. This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources, which is advantageous to various applications in environmental remediation.

Sodium-ion batteries (SIBs) suffer from limited ion diffusion and structural expansion, generating the urgent demand for Na+ accommodable materials with promising architectures. In this work, the rational exploration for Co4S3 nanoparticles confined in an MnS nanorod-grafted N, S-codoped carbon polyhedron (Co-Mn-S@N-S-C) is achieved by the in situ growth of MOF on MnO2 nanorod along with the subsequent carbonization and sulfurization. Benefiting from the distinctive nanostructure, the Co-Mn-S@N-S-C anode delivers excellent structural stability, resulting in prolonged cycling stability with a capacity retention of 90.2% after 1000 cycles at 2 A g-1. Moreover, the reaction storage mechanism is clarified by the in situ X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements. The results indicate that properly designed electrode materials have huge potential applications for highly efficient energy storage devices.

The ability to target specific tissues and to be internalized by cells is critical for successful nanoparticle-based targeted drug delivery. Here, we combined \"stealthy\" rod-shaped poly(2-oxazoline) (POx) nanoparticles of different lengths with a cancer marker targeting nanobody and a fluorescent cell internalization sensor via a heat-induced living crystallization-driven self-assembly (CDSA) strategy. A significant increase in association and uptake driven by nanobody-receptor interactions was observed alongside nanorod-length-dependent kinetics. Importantly, the incorporation of the internalization sensor allowed for quantitative differentiation between cell surface association and internalization of the targeted nanorods, revealing unprecedented length-dependent cellular interactions of CDSA nanorods. This study highlights the modularity and versatility of the heat-induced CDSA process and further demonstrates the potential of POx nanorods as a modular nanomedicine platform.

Zinc oxide (ZnO) is a promising material for nitrogen dioxide (NO2) gas sensors because of its nontoxicity, low cost, and small size. We fabricated one-dimensional (1D) and zero-dimensional (0D) convergence gas sensors activated via ultraviolet (UV) photonic energy to sense NO2 gas at room temperature. One-dimensional ZnO nanorod (ZNR)-based and ZnO nanotube (ZNT)-based gas sensors were synthesized using a simple hydrothermal method. All the sensors were tested under UV irradiation (365 nm) so that they could be operated at room temperature rather than a high temperature. In addition, we decorated 0D Pt nanoparticles (NPs) on the gas sensors to further improve their sensing responsivity. The NO2-sensing response of the ZNT/Pt NP convergence gas sensor was 2.93 times higher than that of the ZNR gas sensor. We demonstrated the complex effects of UV radiation on 1D ZnO nanostructures and 0D metal nanostructures in NO2 gas sensing.