Huge waves caused by typhoons often induce severe disasters along coastal areas, making the effective prediction of typhoon-induced waves a crucial research issue for researchers. In recent years, the development of the Internet of Underwater Things (IoUT) has rapidly increased the prediction of oceanic environmental disasters. Past studies have utilized meteorological data and feedforward neural networks (e.g., BPNN) with static network structures to establish short lead time (e.g., 1 h) typhoon wave prediction models for the coast of Taiwan. However, sufficient lead time for prediction remains essential for preparedness, early warning, and response to minimize the loss of lives and properties during typhoons. The aim of this research is to construct a novel long lead time typhoon-induced wave prediction model using Long Short-Term Memory (LSTM), which incorporates a dynamic network structure. LSTM can capture long-term information through its recurrent structure and selectively retain necessary signals using memory gates. Compared to earlier studies, this method extends the prediction lead time and significantly improves the learning and generalization capability, thereby enhancing prediction accuracy markedly.

Electrical conductivity (EC) is widely recognized as one of the most essential water quality metrics for predicting salinity and mineralization. In the current research, the EC of two Australian rivers (Albert River and Barratta Creek) was forecasted for up to 10 days using a novel deep learning algorithm (Convolutional Neural Network combined with Long Short-Term Memory Model, CNN-LSTM). The Boruta-XGBoost feature selection method was used to determine the significant inputs (time series lagged data) to the model. To compare the performance of Boruta-XGB-CNN-LSTM models, three machine learning approaches-multi-layer perceptron neural network (MLP), K-nearest neighbour (KNN), and extreme gradient boosting (XGBoost) were used. Different statistical metrics, such as correlation coefficient (R), root mean square error (RMSE), and mean absolute percentage error, were used to assess the models\' performance. From 10 years of data in both rivers, 7 years (2012-2018) were used as a training set, and 3 years (2019-2021) were used for testing the models. Application of the Boruta-XGB-CNN-LSTM model in forecasting one day ahead of EC showed that in both stations, Boruta-XGB-CNN-LSTM can forecast the EC parameter better than other machine learning models for the test dataset (R = 0.9429, RMSE = 45.6896, MAPE = 5.9749 for Albert River, and R = 0.9215, RMSE = 43.8315, MAPE = 7.6029 for Barratta Creek). Considering the better performance of the Boruta-XGB-CNN-LSTM model in both rivers, this model was used to forecast 3-10 days ahead of EC. The results showed that the Boruta-XGB-CNN-LSTM model is very capable of forecasting the EC for the next 10 days. The results showed that by increasing the forecasting horizon from 3 to 10 days, the performance of the Boruta-XGB-CNN-LSTM model slightly decreased. The results of this study show that the Boruta-XGB-CNN-LSTM model can be used as a good soft computing method for accurately predicting how the EC will change in rivers.

Schizophrenia (SZ) is a severe, chronic mental disorder without specific treatment. Due to the increasing prevalence of SZ in societies and the similarity of the characteristics of this disease with other mental illnesses such as bipolar disorder, most people are not aware of having it in their daily lives. Therefore, early detection of this disease will allow the sufferer to seek treatment or at least control it. Previous SZ detection studies through machine learning methods, require the extraction and selection of features before the classification process. This study attempts to develop a novel, end-to-end approach based on a 15-layers convolutional neural network (CNN) and a 16-layers CNN- long short-term memory (LSTM) to help psychiatrists automatically diagnose SZ from electroencephalogram (EEG) signals. The deep model uses CNN layers to learn the temporal properties of the signals, while LSTM layers provide the sequence learning mechanism. Also, data augmentation method based on generative adversarial networks is employed over the training set to increase the diversity of the data. Results on a large EEG dataset show the high diagnostic potential of both proposed methods, achieving remarkable accuracy of 98% and 99%. This study shows that the proposed framework is able to accurately discriminate SZ from healthy subject and is potentially useful for developing diagnostic tools for SZ disorder.

UNASSIGNED: Fetal heart rate monitoring during labor can aid healthcare professionals in identifying alterations in the heart rate pattern. However, discrepancies in guidelines and obstetrician expertise present challenges in interpreting fetal heart rate, including failure to acknowledge findings or misinterpretation. Artificial intelligence has the potential to support obstetricians in diagnosing abnormal fetal heart rates.
UNASSIGNED: Employ preprocessing techniques to mitigate the effects of missing signals and artifacts on the model, utilize data augmentation methods to address data imbalance. Introduce a multi-scale long short-term memory neural network trained with a variety of time-scale data for automatically classifying fetal heart rate. Carried out experimental on both single and multi-scale models.
UNASSIGNED: The results indicate that multi-scale LSTM models outperform regular LSTM models in various performance metrics. Specifically, in the single models tested, the model with a sampling rate of 10 exhibited the highest classification accuracy. The model achieves an accuracy of 85.73%, a specificity of 85.32%, and a precision of 85.53% on CTU-UHB dataset. Furthermore, the area under the receiver operating curve of 0.918 suggests that our model demonstrates a high level of credibility.
UNASSIGNED: Compared to previous research, our methodology exhibits superior performance across various evaluation metrics. By incorporating alternative sampling rates into the model, we observed improvements in all performance indicators, including ACC (85.73% vs. 83.28%), SP (85.32% vs. 82.47%), PR (85.53% vs. 82.84%), recall (86.13% vs. 84.09%), F1-score (85.79% vs. 83.42%), and AUC(0.9180 vs. 0.8667). The limitations of this research include the limited consideration of pregnant women\'s clinical characteristics and disregard the potential impact of varying gestational weeks.

Traffic load identification for bridges is of great significance for overloaded vehicle control as well as the structural management and maintenance in bridge engineering. Unlike the conventional load identification methods that always encounter problems of ill-condition and difficulties in identifying multi parameters simultaneously when solving the motion equations inversely, a novel strategy is proposed based on smart sensing combing intelligent algorithm for real-time traffic load monitoring. An array of lead zirconium titanate sensors is applied to capture the dynamic responses of a beam bridge, while the Long Short-Term Memory (LSTM) neural network is employed to establish the mapping relations between the dynamic responses of the bridge and the traffic load through data mining. The results reveal that, with the real-time strain responses fed into the LSTM network, the speed and magnitude of the moving load may be identified simultaneously with high accuracy when compared to the practically applied load. The current method may facilitate highly efficient identification of the time-varying characteristics of moving loads and may provide a useful tool for long-term traffic load monitoring and traffic control for in-service bridges.

Providing accurate crop yield estimations at large spatial scales and understanding yield losses under extreme climate stress is an urgent challenge for sustaining global food security. While the data-driven deep learning approach has shown great capacity in predicting yield patterns, its capacity to detect and attribute the impacts of climatic extremes on yields remains unknown. In this study, we developed a deep neural network based multi-task learning framework to estimate variations of maize yield at the county level over the US Corn Belt from 2006 to 2018, with a special focus on the extreme yield loss in 2012. We found that our deep learning model hindcasted the yield variations with good accuracy for 2006-2018 (R2 = 0.81) and well reproduced the extreme yield anomalies in 2012 (R2 = 0.79). Further attribution analysis indicated that extreme heat stress was the major cause for yield loss, contributing to 72.5% of the yield loss, followed by anomalies of vapor pressure deficit (17.6%) and precipitation (10.8%). Our deep learning model was also able to estimate the accumulated impact of climatic factors on maize yield and identify that the silking phase was the most critical stage shaping the yield response to extreme climate stress in 2012. Our results provide a new framework of spatio-temporal deep learning to assess and attribute the crop yield response to climate variations in the data rich era.

With the escalation in the size and complexity of modern Denial of Service attacks, there is a need for research in the context of Machine Learning (ML) used in attack execution and defense against such attacks. This paper investigates the potential use of ML in generating behavioral telemetry data using Long Short-Term Memory network and spoofing requests for the analyzed traffic to look legitimate. For this research, a custom testing environment was built that listens for mouse and keyboard events and analyzes them accordingly. While the economic feasibility of this attack currently limits its immediate threat, advancements in technology could make it more cost-effective for attackers in the future. Therefore, proactive development of countermeasures remains essential to mitigate potential risks and stay ahead of evolving attack methods.

The internal mechanisms of dental air turbine handpieces (DATHs) have become increasingly intricate over time. To enhance the operational reliability of dental procedures and guarantee patient safety, this study formulated temporal convolution network (TCN) prediction models with the functions of causality in time sequence, transmitting memory, learning, storing, and fast convergence for monitoring the health and diagnosing the rotor and collet failure of DATHs. A handpiece mimicking a dentist\'s hand load of 100 g was employed to repeatedly mill a glass porcelain block back and forth for cutting. An accelerometer was employed to capture vibration signals during free-running of unrestrained operation of the handpiece, aiming to discern the characteristic features of these vibrations. These data were then utilized to create a diagnostic health classification (DHC) for further developing a TCN, a 1D convolutional neural network (CNN), and long short-term memory (LSTM) prediction models. The three frameworks were used and compared for machine learning to establish DHC prediction models for the DATH. The experimental results indicate that, in terms of DHC predicted for the experimental dataset, the square categorical cross-entropy loss function error of the TCN framework was generally lower than that of the 1D CNN, which did not have a memory framework or the drawback of the vanishing gradient problem. In addition, the TCN framework outperformed the LSTM model, which required a longer history to provide sufficient diagnostic ability. Still, high accuracies were achieved both in the direction of feed-drive milling and in the gravity of the handpiece through vibration signals. In general, the failure classification prediction model could accurately predict the health and failure mode of the dental handpiece before the use of the DATH when an embedded sensor was available. Therefore, this model could prove to be a beneficial tool for predicting the deterioration patterns of real dental handpieces in their remaining useful life.

Characterization of lung sounds (LS) is indispensable for diagnosing respiratory pathology. Although conventional neural networks (NNs) have been widely employed for the automatic diagnosis of lung sounds, deep neural networks can potentially be more useful than conventional NNs by allowing accurate classification without requiring preprocessing and feature extraction. Utilizing the long short-term memory (LSTM) layers to reveal the sequence-based properties of the LS time series, a novel architecture consisting of a cascade of convolutional long short-term memory (ConvLSTM) and LSTM layers, namely ConvLSNet is developed, which permits highly accurate diagnosis of pulmonary disease states. By modeling the multichannel lung sounds through the ConvLSTM layer, the proposed ConvLSNet architecture can concurrently deal with the spatial and temporal properties of the six-channel LS recordings without heavy preprocessing or data transformation. Notably, the proposed model achieves a classification accuracy of 97.4 % based on LS data corresponding to three pulmonary conditions, namely asthma, COPD, and the healthy state. Compared with architectures consisting exclusively of CNN or LSTM layers, as well as those employing a cascade integration of 2DCNN and LSTM layers, the proposed ConvLSNet architecture exhibited the highest classification accuracy, while imposing the lowest computational cost as quantified by the number of parameters, training time, and learning rate.

Adolescence is a developmental period in which social interactions are critical for mental health. While the onset of COVID-19 significantly disrupted adolescents\' social environments and mental health, it remains unclear how adolescents have adapted to later stages of the pandemic. We harnessed a machine learning architecture of Long Short-Term Memory recurrent networks (LSTM) with gradient-based feature importance, to model the association among daily social interactions and depressive symptoms during three stages of the pandemic. A year before COVID-19, 148 adolescents reported social interactions and depressive symptoms, every day for 21 days. One hundred sixteen of these youths completed a 28-day diary after schools closed due to COVID-19. Seventy-nine of these youths and additional 116 new participants completed a 28-day diary approximately a year into the pandemic. Our results show that LSTM successfully predicted depressive symptoms from at least a week of social interactions for all three waves (r2 > .70). Our study shows the utility of using an analytic approach that can identify temporal and nonlinear pathways through which social interactions may confer risk for depression. Our unique analysis of the importance of input features enabled us to interpret the association between social interactions and depressive symptoms. Collectively, we observed a return to pre-pandemic patterns a year into the pandemic, with reduced gender and age differences during the pandemic closures. This pattern suggests that the system of social influences in adolescence was affected by COVID-19, and that this effect was attenuated in more chronic stages of the pandemic.