In the last few years, the exploitation of deep-sea regions for minerals extraction raised international attention as an economically viable source for the mining industry. However, most of these minerals are found close to sensitive ecosystems that can be harmed by mining activities. Given the potential impact, there is a need for the establishment of best practices towards the adoption of preventive strategies for the sustainable management and exploitation of deep-sea environments. To accomplish this objective, numerical models have proven to be reliable tools to support decision-making. In the present study, a high-resolution eddy-resolving ocean numerical model was configured and integrated with a semi-Lagrangian model aiming to map the transport of rock-fragments associated with mining activities. The model was applied to an area rich in polymetallic sulphides at the Northern Mid-Atlantic Ridge (NMAR). Model results showed that local topography and circulation dynamics played an important role for the dispersion and settling of the rock-fragments. In the presence of local submesoscale processes, the residence time do not follow the neutral relation H/vs. It was demonstrated that, depending on the local hydrodynamics, rock-fragments released at sub-surface depth can impact wider areas, with a predicted impact on pelagic and benthic organisms.

Chemicals are representative environmental factors that affect human health. Recently, external exposure to a chemical of rhododenol (RD) caused chemical leukoderma, an acquired patchy hypopigmentation, in about 20,000 Asian people. The development of a hazard assessment system for accurate determination of leukoderma-inducible chemicals is required for the prevention of such tragedies. Case studies in humans have shown 6 chemicals, including RD, with a constitutive leukoderma-inducible potency and 3 chemicals with a photosensitive but not a constitutive leukoderma-inducible potency. In this study, the 6 positive and 3 negative control chemicals with or without constitutive leukoderma-inducible potencies were investigated by our previously developed in vivo hazard assessment system using tail skin of mice. Based on the results of validation, this study aimed to develop an in vitro hazard assessment system to correctly determine chemicals with a constitutive leukoderma-inducible potency. As expected, external exposure to the 6 positive control chemicals, but not external exposure to the 3 negative control chemicals, resulted in development of constitutive leukoderma in mouse tail skin with a decreased level of skin melanin and decreased number of melanocytes. Moreover, the 6 positive and 3 negative control chemicals were correctly distinguished by the presence or absence of endoplasmic reticulum (ER) stress induction, but not by tyrosinase-dependent cell death or production of reactive oxygen species (ROS), in immortalized normal melanocytes. The hazard assessment system using tail skin could be a solid in vivo tool to reliably determine the chemical potency of a chemical for constitutive leukoderma induction. The hazard assessment system focusing on ER stress induction in normal melanocytes might be a novel and convenient in vitro tool for accurately evaluating chemicals with leukoderma-inducible potencies. Thus, this study contributed to environmentology through the development of a screening system for preventing an environmental factor-related disease.

The registration of novel pesticides that are subsequently banned because of their unexpected negative effects on non-target species can have a huge environmental impact. Therefore, the pre-emptive evaluation of the potential effects of new compounds is essential. To this aim both lethal and sublethal effects should be assessed in a realistic scenario including the other stressors that can interact with pesticides. However, laboratory studies addressing such interactive effects are rare, while standardized laboratory-based protocols focus on lethal effects and not on sub-lethal effects. We propose to assess both lethal and sublethal effects in a multifactorial context including the other stressors affecting the non-target species. We tested this approach by studying the impact on honey bees of the insecticide sulfoxaflor in combination with a common parasite, a sub-optimal temperature and food deprivation. We studied the survival and the transcriptome of honey bees, to assess both the lethal and the potential sublethal effects of the insecticide, respectively. With this method we show that a field realistic concentration of sulfoxaflor in food does not affect the survival of honey bees; however, the significant impact on some key genes indicates that sublethal effects are possible in a realistically complex scenario. Moreover, our results demonstrate the feasibility and reliability of a novel approach to hazard assessment considering the interactive effects of pesticides. We anticipate our approach to be a starting point for a paradigm shift in toxicology: from an unifactorial, mortality-centered assessment to a multifactorial, comprehensive approach. This is something of the utmost importance to preserve pollination, thus contributing to the sustainability of our food production system.

Hazard assessment is fundamental in the field of disaster risk management. With the increase in global warming, compound water and temperature events have become more frequent. Current research lacks risk assessments of low temperatures and their compound events, necessitating relevant hazard assessment work to improve the accuracy and diversity of maize disaster prevention and mitigation strategies. This study comparatively analyzed the dynamic evolution characteristics and hazards of compound drought/waterlogging and low temperature events (CDLEs and CWLEs) for maize in the Songliao Plain during different growth periods from 1981 to 2020. First, composite drought/waterlogging and low temperature magnitude indices (CDLMI and CWLMI) were constructed to quantify the intensity of CDLEs and CWLEs by fitting non-exceedance probabilities. Next, static and dynamic hazard assessment models were developed by fitting probability density and cumulative probability density curves to CDLMI and CWLMI. The results showed that the correlations between SPRI and LTI across different decades were mainly negative during the three growth periods. The hazard ratings for both CDLEs and CWLEs were relatively high in the northern part of the study area, consistent with the higher occurrence, duration, and severity of both CDLEs and CWLEs at higher latitudes. Relative to 2001-2010, the center of gravity of hazard shifted southward for CDLEs and northward for CWLEs in 2011-2020. The mean duration, frequency, and hazard were generally higher for CWLEs, but CDLEs were associated with more severe maize yield reductions. This study provides new insights into compound disaster risk assessment, and the research methodology can be generalized to other agricultural growing areas to promote sustainable development of agricultural systems and food security.

Read-across (RAx) and grouping of chemicals into categories are well-known concepts in toxicology. Recently, ECHA proposed a grouping approach for branched-chain carboxylic acids (BCAs) including more than 60 branched-chain saturated carboxylic acids for hazard identification. Grouping was based only on structural considerations. Due to developmental effects of two members, ECHA postulated that \"all short carbon chain acids … are likely reproductive and developmental toxicants\". This work analyzes available data for BCAs. The number of compounds in the group can be significantly reduced by eliminating metal and organic salts of BCAs, compounds of unknown or variable composition, and complex reaction products or biological materials (UVCB compounds). For the resulting reduced number of compounds, grouping is supported by similar physicochemical data and expected similar biotransformation. However, analysis of adverse effects for compounds in the group and mechanistic information show that BCAs, as a class, do not cause developmental effects in rats. Rather, developmental toxicity is limited to selected BCAs with specific structures that share a common mode of action (histone deacetylase inhibition). Thus, the proposed grouping is unreasonably wide and the more detailed analyses show that structural similarity alone is not sufficient for grouping branched-chain carboxylic acids for developmental toxicity.

Metals can be adsorbed on particulate matter, settle in sediments and cause alterations in aquatic environments. This study assesses the effect of Ag and/or Cd, both in ionic and nanoparticle (NP) forms, on the microbiome of sediments. For that purpose, aquatic controlled-microcosm experiments were exposed to an environmentally relevant and at tenfold higher doses of each form of the metals. Changes in the bacteriome were inferred by 16S rDNA sequencing. Ionic Ag caused a significant decrease of several bacterial families, whereas the effect was opposite when mixed with Cd, e.g., Desulfuromonadaceae family; in both cases, the bacteriome functionalities were greatly affected, particularly the nitrogen and sulfur metabolism. Compared to ionic forms, metallic NPs produced hardly any change in the abundance of microbial families, although the α-biodiversity of the bacteriome was reduced, and the functionality altered, when exposed to the NPs´ mixture. Our goal is to understand how metals, in different forms and combinations, released into the environment may endanger the health of aquatic ecosystems. This work may help to understand how aquatic metal pollution alters the structure and functionality of the microbiome and biogeochemical cycles, and how these changes can be addressed.

Disinfection during tertiary municipal wastewater treatment is a necessary step to control the spread of pathogens; unfortunately, it also gives rise to numerous disinfection byproducts (DBPs), only a few of which are regulated because of the analytical challenges associated with the vast number of potential DBPs. This study utilized polydimethylsiloxane (PDMS) passive samplers, comprehensive two-dimensional gas chromatography (GC×GC) coupled with time-of-flight mass spectrometry (TOFMS), and non-negative matrix factorization (NMF) spectral deconvolution for suspect screening of DBPs in treated wastewater. PDMS samplers were deployed upstream and downstream of the chlorination unit in a municipal wastewater treatment plant located in Abu Dhabi, and their extracts were analyzed using GC×GC-TOFMS. A workflow incorporating a multi-tiered, eight-filter screening process was developed, which successfully enabled the reliable isolation of 22 candidate DBPs from thousands of peaks. The NMF spectral deconvolution improved the match factor score of unknown mass spectra to the reference mass spectra available in the NIST library by 17% and facilitated the identification of seven additional DBPs. The close match of the first-dimension retention index data and the GC×GC elution patterns of DBPs, both predicted using the Abraham solvation model, with their respective experimental counterparts-with the measured data available in the NIST WebBook and the GC×GC elution patterns being those observed for the candidate peaks-significantly enhanced the accuracy of peak assignment. Isotopic pattern analysis revealed a close correspondence for 11 DBPs with clearly visible isotopologues in reference spectra, thereby further strengthening the confidence in the peak assignment of these DBPs. Brominated analogues were prevalent among the detected DBPs, possibly due to seawater intrusion. The fate, behavior, persistence, and toxicity of tentatively identified DBPs were assessed using EPI Suite™ and the CompTox Chemicals Dashboard. This revealed their significant toxicity to aquatic organisms, including developmental, mutagenic, and endocrine-disrupting effects in certain DBPs. Some DBPs also showed activity in various CompTox bioassays, implicating them in adverse molecular pathways. Additionally, 11 DBPs demonstrated high environmental persistence and resistance to biodegradation. This combined approach offers a powerful tool for future research and environmental monitoring, enabling accurate identification and assessment of DBPs and their potential risks.

BACKGROUND: Compatibility studies of insecticides and natural enemies usually focus on short-term lethal effects, without considering the long-term sublethal effects (including progeny). Even less-explored are the effects of commercial insecticides formulated with more than one active product. Short- and long-term lethal and sublethal effects were studied for the first time on the progeny of commercial formulations of spirotetramat, imidacloprid and a commercial mixture of these active ingredients on pupae of Diaeretiella rapae (M\'ntosh) (Hymenoptera: Braconidae), an endoparasitoid of aphids considered to be a potential biological control agent. Insecticides were exposed topically on aphid mummies in which the parasitoid was in the pupal stage.
RESULTS: Imidacloprid reduced adult emergence by more than 30% and prolonged intra-host development time with respect to control from half the maximum recommended field dose (MFRD). Spirotetramat and commercial mixture only showed significant effects on these endpoints at doses above the MFRD. The tested formulations did not affect adult longevity, sex ratio, and percentage of parasitism in the exposed generation. At low concentrations the active ingredients in the commercial mixture behave synergistically, whereas at medium and high concentrations they behave antagonistically. Considering the 10% lethal dose (LD10), imidacloprid showed the highest hazard coefficient, whereas the commercial mixture was more hazardous when considering the LD50 and LD90. The commercial mixture and imidacloprid induced higher adult emergence and altered the sex ratio in the progeny.
CONCLUSIONS: The following order of toxicity on D. rapae can be established: imidacloprid > commercial mixture > spirotetramat. Joint use of this species with imidacloprid and commercial mixture should be avoided in integrated pest management programs. © 2024 Society of Chemical Industry.

Permitted Daily Exposure Limits (PDEs) are set for Active Pharmaceutical Ingredients (APIs) to control cross-contamination when manufacturing medicinal products in shared facilities. With the lack of official PDE lists for pharmaceuticals, PDEs have to be set by each company separately. Although general rules and guidelines for the setting of PDEs exist, inter-company variations in the setting of PDEs occur and are considered acceptable within a certain range. To evaluate the robustness of the PDE approach between different pharmaceutical companies, data on PDE setting of five marketed APIs (amlodipine, hydrochlorothiazide, metformin, morphine, and omeprazole) were collected and compared. Findings show that the variability between PDE values is within acceptable ranges (below 10-fold) for all compounds, with the highest difference for morphine due to different Point of Departures (PODs) and Adjustment Factors (AFs). Factors of PDE variability identified and further discussed are: (1) availability of data, (2) selection of POD, (3) assignment of AFs, (4) route-to-route extrapolation, and (5) expert judgement and differences in company policies. We conclude that the investigated PDE methods and calculations are robust and scientifically defensible. Additionally, we provide further recommendations to harmonize PDE calculation approaches across the pharmaceutical industry.

The use of bisphenol A (BPA), a substance of very high concern, is proposed to be banned in food contact materials (FCMs) in the European Union. To prevent regrettable substitution of BPA by alternatives with similar or unknown hazardous properties, it is of importance to gain the relevant toxicological information on potential BPA alternative substances and monitor them adequately. We created an inventory of over 300 substances mentioned as potential BPA alternatives in regulatory reports and scientific literature. This study presents a prioritization strategy to identify substances that may be used as an alternative to BPA in FCMs. We prioritized 20 potential BPA alternatives of which 10 are less familiar. We subsequently reviewed the available information on the 10 prioritized less familiar substances regarding hazard profiles and migration potential obtained from scientific literature and in silico screening tools to identify a possible risk of the substances. Major data gaps regarding the hazard profiles of the prioritized substances exist, although the scarce available data give some indications on the possible hazard for some of the substances (like bisphenol TMC, 4,4-dihydroxybenzophenone, and tetrachlorobisphenol A). In addition, very little is known about the actual use and exposure to these substances. More toxicological research and monitoring of these substances in FCMs are, therefore, required to avoid regrettable substitution of BPA in FCM.