OBJECTIVE: To explore the changes in microcirculation and microvasculature of the bulbar conjunctiva during the short-term wearing of the scleral lenses (ScCL). And investigate the factors affecting the microcirculation and microvasculature of the bulbar conjunctiva.
METHODS: In this prospective cross-sectional study, functional slit lamp biomicroscopy (FSLB) was used to image the ocular surface microcirculation and microvascular images at two different sites (under the area of ScCL and outside of the area of ScCL) before (baseline) and during the wearing of ScCL at 0 h, 1 h, 2 h and 3 h. Anterior segment optical coherence tomography (AS-OCT) (RTVue, Optovue Inc, USA) was also used to image central post-lens tear film (PoLTF) and the morphology changes of the conjunctiva under the landing zone at the same time period. The semi-automatic quantification of microcirculation and microvasculature including vessel density (Dbox), vessel diameter (D), axial blood flow velocity (Va) and blood flow volume (Q). And the morphological changes of conjunctiva and PoLTF fogging grading were evaluated manually. The changes in the microcirculation and microvasculature of the ocular surface, PoLTF fogging grade and conjunctival morphology were compared before and during the ScCL wearing at different time periods, and the relationship between them was analyzed.
RESULTS: Nineteen eyes (11 right eyes, 8 left eyes) were analyzed in this study. Outside of the area of ScCL, the Dbox before wearing lenses was less than that at 0 h (P = 0.041). The Q at baseline was greater than that after 1 h ScCL wearing (P = 0.026). Under the area of the ScCL, the Q at 1 h was less than that at baseline and 3 h. During the ScCL wearing, statistically significant conjunctival morphology changes were found among different time stages (baseline (0 μm), 0 h (113.18 μm), 2 h (138.97 μm), 3 h (143.83 μm) (all P ＜0.05). Outside the area of the ScCL, the morphology changes of the conjunctiva were negatively correlated with the changes of Va (P＜0.001,r = -0.471) and Q (P = 0.003,r = -0.348),but positively correlated with the Dbox (P = 0.001,r = 0.386). Under the area of ScCL, the morphology changes of the conjunctiva were negatively correlated with the Q (P = 0.012, r = -0.291). The fogging grade was positively correlated with the Q under the area of the ScCL (P = 0.005, r = 0.331).
CONCLUSIONS: The microcirculation and microvasculature of the ocular surface and conjunctival morphology were changed after wearing ScCL in wearers, which indicated that the microvascular responses happened in the ScCL wearers and the severity of microvascular responses of the ocular surface related to the morphology changes of the conjunctiva. The quantification methods and findings in this study provide clues for the safety of ScCL wearing and may supervise the health of the wearer\'s ocular surface.

In this study, eight new species are described from the subtropical parts of Yunnan Province in southwestern China: Belisanahonghe Zhang, Li & Yao, sp. nov. (♂♀), B.jiuxiang Zhang, Li & Yao, sp. nov. (♂♀), B.lincang Zhang, Li & Yao, sp. nov. (♂♀), B.luxi Zhang, Li & Yao, sp. nov. (♂♀), B.tengchong Zhang, Li & Yao, sp. nov. (♂♀), B.tongi Zhang, Li & Yao, sp. nov. (♂♀), B.yongsheng Zhang, Li & Yao, sp. nov. (♂), and B.yunnan Zhang, Li & Yao, sp. nov. (♂♀). They add up to a total of 31 Belisana species from Yunnan in an updated list provided in this paper.

In laparoscopic and thoracoscopic surgery, maintaining clear visualization is crucial for safe and efficient operation. We have developed a new scope warmer/cleaner (Lapahot®) based on \"hot-pack\" technology. We used our device in 20 consecutive laparoscopic and thoracoscopic cases and compared it with the conventional warm saline method. Lens fogging was not observed in any of the cases, and the cleaning function was comparable to the warm saline method. Moreover, continuous temperature monitoring showed that Lapahot® maintained its temperature much longer than warm saline. Our novel device has the potential to become the new standard for lens defogging and cleaning.

A commonly encountered challenge with freeze-dried drug products is glass vial fogging. Fogging is characterized by a thin layer of product deposited upon the inner surface of the vial above the lyophilized cake. While considered to be a routine cosmetic defect in many instances, fogging around the shoulder and neck of the vial may potentially impact container closure integrity and reject rates during inspection. In this work, the influence of processing conditions i.e. vial pre-treatment, lyophilization cycle modifications and filling conditions on fogging was evaluated. A battery of analytical techniques was employed to investigate factors affecting glass vial fogging. A fogging score was used to quantify its severity in freeze-dried products. Additionally, a dye-based method was used to study solution upcreep (Marangoni flow) following product filling. Our lab-scale results indicate measurable improvement in fogging following the addition of an annealing step in the lyophilization cycle. Pre-freeze isothermal holding of the vials (at 5°C on the lyophilizer shelf) for an extended duration indicated a reduction in fogging whereas an increase in the freezing time exhibited no effect on fogging. Vial pre-treatment conditions were critical determinants of fogging for Type 1 vials whereas they had no impact on fogging in TopLyo® vials. The headspace relative humidity (RH) investigation also indicated sufficient increase in the water vapor pressure inside the vial to be conducive to the formulation of a hydration film - the precursor to Marangoni flow.

UNASSIGNED: Fogging and staining of a laparoscope lens negatively impact surgical visualization. We hypothesized that the disposable hot pack could not only warm but also clean laparoscopes. Hence, this study verified and developed the disposable hot pack with anti-fogging and cleaning function.
UNASSIGNED: The laparoscope was inserted into a swine abdominal cavity for five minutes. Then, the laparoscopic tip was heated with 65 °C saline or the folded disposable hot pack with nonwoven fabric coated surfactant for ten seconds (n = 15). Also, a laparoscopic tip with dirt was wiped with the prototype or conventional gauze for 10 s (n = 10). The dirt, fogging, and temperature of the laparoscopic tip were respectively evaluated after the laparoscope was inserted into the abdominal cavity.
UNASSIGNED: The laparoscopic tip temperature five minutes after insertion into the abdominal cavity was similar (31.1 °C vs 31.2 °C, p = 0.748) and there was no fogging in both methods. The conventional gauze had significantly less temperature of the laparoscopic tip after cleaning and higher fogging occurrence than the prototype (29.5 °C vs 34.0 °C, p < 0.001, 30% vs 0%, p = 0.030, respectively), although there was no dirt left after both methods.
UNASSIGNED: The disposable hot pack has a strong potential as an anti-fogging and cleaning device for use during laparoscopic surgery.

UNASSIGNED: Fogging of protective eyewear (PEW) can hinder routine work in the intensive care unit (ICU). The prevalence of fogging impairing vision (FIV) and the technique that reduces fogging have not been evaluated previously.
UNASSIGNED: After donning personal protective equipment (PPE) with an N95 mask, the healthcare workers (HCWs) sequentially tried plain PEW, soap-coated PEW, PEW worn at a distance over the PPE hood, and the use of tape over a mask. The vision (distant and near) was checked before wearing PEW and with each technique. The prevalence of fogging and FIV, that is, change in vision in either eye was estimated and compared among various techniques. Mixed-effects logistic regression was used to analyze factors affecting fogging and to compare techniques. Room temperature, room humidity, and lens temperature were measured during the study.
UNASSIGNED: A total of 125 HCWs participated (151 observations) and the prevalence of FIV was 66.7%. The fogging of PEW, as well as the extent of PEW fogging, was least with soap coating followed by a mask with tape and goggles worn at a distance. The FIV was significantly lesser only with the mask with tape with an odds ratio (OR) [confidence interval CI)] of 0.45 (0.25-0.82). The prevalence of fogging while at work in the COVID ICU was 38%.
UNASSIGNED: The prevalence of FIV is 66%. Application of tape over the mask can avoid disturbances in vision best. Soap coating of the PEW and PEW worn at distance from the eyes are potential alternatives.
UNASSIGNED: Ravisankar NP, D\'Silva CS, Varma MMKG, Sudarsan TI, Sampath S, Thomas T, et al. Fogging of Protective Eyewear in Intensive Care Unit and a Comparative Study of Techniques to Reduce It. Indian J Crit Care Med 2023;27(1):32-37.

UNASSIGNED: During laparoscopic surgery, visualization is fogged due to the influence of temperature. Fogging on the laparoscopic lens heightens the difficulty of the procedure. Therefore, the aim of this study was to analyse thermodynamics in laparoscopy.
UNASSIGNED: A temperature sensor was attached to the laparoscopic tip and the abdominal cavity of five swine under general anaesthesia. The laparoscope was inserted into the abdominal cavity for five minutes after heating its tip with 65 °C saline for 10-300 s. The defogged laparoscope was wiped at room temperature for 10-300 s. Then, the laparoscope was inserted into the abdominal cavity for five minutes.
UNASSIGNED: The temperature five minutes after insertion was similar for the 10-300 s heating durations (approximately 32.0 °C). There was no fogging when the laparoscope was wiped for 10-30 s. Two fogging events occurred when it was wiped for 60 s (temperature difference: -3.5 °C, -4.6 °C). Five fogging events were observed immediately after insertion when it was wiped for 300 s.
UNASSIGNED: This study showed that the heating time was more than ten seconds to prevent fogging. We found that fogging occurred when the laparoscopic tip temperature was 3.5 °C lower than the abdominal cavity temperature.

Traditionally, dengue is controlled by fogging, and the prime location for the control measure is at the patient\'s residence. However, when Malaysia was hit by the first wave of the Coronavirus disease (COVID-19), and the government-imposed movement control order, dengue cases have decreased by more than 30% from the previous year. This implies that residential areas may not be the prime locations for dengue-infected mosquitoes. The existing early warning system was focused on temporal prediction wherein the lack of consideration for spatial component at the microlevel and human mobility were not considered. Thus, we developed MozzHub, which is a web-based application system based on the bipartite network-based dengue model that is focused on identifying the source of dengue infection at a small spatial level (400 m) by integrating human mobility and environmental predictors. The model was earlier developed and validated; therefore, this study presents the design and implementation of the MozzHub system and the results of a preliminary pilot test and user acceptance of MozzHub in six district health offices in Malaysia. It was found that the MozzHub system is well received by the sample of end-users as it was demonstrated as a useful (77.4%), easy-to-operate system (80.6%), and has achieved adequate client satisfaction for its use (74.2%).

UNASSIGNED: Hydrogen peroxide is a strong oxidant that possesses an antimicrobial activity. It has been successfully used in surface/room decontamination processes either under the form of hydrogen peroxide vapor (HPV) or of vaporized hydrogen peroxide (VHP). Aerosolized hydrogen peroxide (aHP) offers a third alternative. The technology relies on the dispersion of aerosols of a hydrogen peroxide solution often complemented with silver cations. aHP provides an inexpensive and safe approach to treat contaminated rooms but sometimes fails to achieve the 6-log10 reduction limit in the number of viable microorganisms.
UNASSIGNED: Here, we used a venturi-based aHP generator that generates 4 mm in size aerosols from a 12% plasma-activated hydrogen peroxide solution free of silver cations.
UNASSIGNED: We could successfully and constantly inactivate bacterial growth from biological indicators containing at least 106 spores of Geobacillus stearothermophilus placed on stainless steel discs wrapped in Tyvek pouches. We could also show that the biological indicators placed at various locations in a class II biosafety cabinet were equally inactivated, showing that hydrogen peroxide aerosols migrate through HEPA filters.
UNASSIGNED: Considering that our method for aerosol generation is simple, reproducible, and highly effective at inactivating spores, our approach is expected to serve as a relatively cost effective alternative method for disinfecting potentially contaminated rooms or surfaces.

UNASSIGNED: The applications of fumigation and the challenges that high-containment facilities face in achieving effective large volume decontamination are well understood. The Biosecurity Research Institute at Kansas State University sought to evaluate a novel system within their biosafety level 3 (BSL-3) and animal biosafety level 3 agriculture (ABSL-3Ag) facility.
UNASSIGNED: The system chosen for this study is the CURIS® Hybrid Hydrogen PeroxideTM (HHPTM) system, comprising a mobile 36-pound (16 kg) device delivering a proprietary 7% hydrogen peroxide (H2O2) solution. To examine the system\'s efficacy in multiple laboratory settings, two BSL-3 laboratories (2,281 [65 m3] and 4,668 ft3 [132 m3]) with dropped ceiling interstitial spaces and an ABSL-3Ag necropsy suite (44,212 ft3 [1,252 m3]) with 21-foot (6.4 m) ceilings were selected. Biological indicators (BIs) of Geobacillus stearothermophilus (1.7 × 106 organisms) on steel spore carriers and H2O2 chemical indicators (CIs) were used to provide validation.
UNASSIGNED: After cycle optimization, the smaller laboratory had a total of 60 BIs over two treatments that demonstrated a greater than 6-log reduction of bacterial spores. The larger laboratory (192 BIs) and the necropsy suite (206 BIs) had no BIs positive for spore growth when incubated at 60°C for 24 h per manufacturer\'s specifications.
UNASSIGNED: Overall successful results through multiple components of this study demonstrate that the HHP device, paired with the pulsed 7% H2O2 solution, achieved efficacy regardless of variables in laboratory size and layout. Perceived challenges such as 21-ft (6.4 m) ceiling heights, active equipment, and difficult to access ceiling interstitial spaces proved unfounded. Given the successful sterilization of all challenged BIs, the HHP system presents a useful alternative for high level decontamination within BSL-3 and ABSL-3Ag facilities.