In this study, a gravity-driven membrane (GDM) filtration system and hydroponic system (cultivating basil and lettuce) were combined for nutrient recovery from primary municipal wastewater. The GDM system was optimized by increasing the periodic air sparging flow rate from 1 to 2 L/min (∼15 hr per 3-4 days), resulting in a ∼52% reduction of irreversible fouling. However, the total fouling was not alleviated, and the water productivity remained comparable. The GDM-filtrated water was then delivered to hydroponic systems, and the effects of hydroponic operation conditions on plant growth and heavy metal uptake were evaluated, with fertilizer- and tap water-based hydroponic systems and soil cultivation system (with tap water) for comparison. It was found that (i) the hydroponic system under batch mode facilitated to promote vegetable growth with higher nutrient uptake rates compared to that under flow-through feed mode; (ii) a shift in nutrient levels in the hydroponic system could impact plant growth (such as plant height and leaf length), especially in the early stages. Nevertheless, the plants cultivated with the GDM-treated water had comparable growth profiles to those with commercial fertilizer or in soils. Furthermore, the targeted hazard quotient levels of all heavy metals for the plants in the hydroponic system with the treated water were greatly lower than those with the commercial fertilizer. Especially, compared to the lettuce, the basil had a lower heavy metal uptake capability and displayed a negligible impact on long-term human health risk, when the treated water was employed for the hydroponic system.

Agricultural intensification is a major driver of global biodiversity loss. In Europe, intensification progressed over the 20th century and was accelerated by instruments of the EU\'s Common Agricultural Policy. Central and Eastern European (CEE) countries standing outside the EU until the beginning of the 21st century employed less intensive farming and are considered one of the continent\'s farmland biodiversity strongholds. Their recent EU accession might be either viewed as a threat to farmland biodiversity due to the availability of funds to increase agricultural production or as an opportunity to implement conservation measures aimed to preserve biodiversity. Here we assessed these possibilities using long-term monitoring data on farmland bird populations in seven CEE countries. We tested whether mean relative abundance and population trends changed after countries\' EU accession, and whether such changes also occurred in agricultural management and conservation measures. Both agricultural intensity and spending for agri-environmental and climatic schemes increased when the CEE countries joined the EU. At the same time, farmland bird populations started to decline and their relative abundance was lower after than before EU accession. In addition, increases in fertilizer application were negatively associated with annual changes in relative farmland bird population sizes, indicating a negative impact of intensive agriculture. Taken together, these results indicate that despite the great power of the EU\'s environmental legislation to improve the population status of species at risk, this does not apply to farmland birds. In their case, the adverse impacts of agricultural intensification most likely overrode the possible benefits of conservation measures. To secure this region as one of the continent\'s farmland biodiversity strongholds, policy and management actions are urgently needed.

The nitrogen-stable isotopes of plants can be used to verify the source of fertilizers, but the fertilizer uptake patterns in tea (Camellia sinensis) plants are unclear. In this study, potted tea plants were treated with three types of organic fertilizers (OFs), urea, and a control. The tea leaves were sampled over seven months from the top, middle, and base of the plants and analyzed for the δ15N and nitrogen content, along with the corresponding soil samples. The top tea leaves treated with the rapeseed cake OF had the highest δ15N values (up to 6.6‱), followed by the chicken manure, the cow manure, the control, and the urea fertilizer (6.5‱, 4.1‱, 2.2‱, and 0.6‱, respectively). The soil treated with cow manure had the highest δ15N values (6.0‱), followed by the chicken manure, rapeseed cake, control, and urea fertilizer (4.8‱, 4.0‱, 2.5‱, and 1.9‱, respectively). The tea leaves fertilized with rapeseed cake showed only slight δ15N value changes in autumn but increased significantly in early spring and then decreased in late spring, consistent with the delivery of a slow-release fertilizer. Meanwhile, the δ15N values of the top, middle, and basal leaves from the tea plants treated with the rapeseed cake treatment were consistently higher in early spring and lower in autumn and late spring, respectively. The urea and control samples had lower tea leaf δ15N values than the rapeseed cake-treated tea and showed a generalized decrease in the tea leaf δ15N values over time. The results clarify the temporal nitrogen patterns and isotope compositions of tea leaves treated with different fertilizer types and ensure that the δ15N tea leaf values can be used to authenticate the organic fertilizer methods across different harvest periods and leaf locations. The present results based on a pot experiment require further exploration in open agricultural soils in terms of the various potential fertilizer effects on the different variations of nitrogen isotope ratios in tea plants.

A defining feature of the Anthropocene is the distortion of the biosphere phosphorus (P) cycle. A relatively sudden acceleration of input fluxes without a concomitant increase in output fluxes has led to net accumulation of P in the terrestrial-aquatic continuum. Over the past century, P has been mined from geological deposits to produce crop fertilizers. When P inputs are not fully removed with harvest of crop biomass, the remaining P accumulates in soils. This residual P is a uniquely anthropogenic pool of P, and its management is critical for agronomic and environmental sustainability. Managing residual P first requires its quantification-but measuring residual P is challenging. In this review, we synthesize approaches to quantifying residual P, with emphasis on advantages, disadvantages, and complementarity. Common approaches to estimate residual P are mass balances, long-term experiments, soil test P trends and chronosequences, with varying suitability or even limitations to distinct spatiotemporal scales. We demonstrate that individual quantification approaches are (i) constrained, (ii) often complementary, and (iii) may be feasible at only certain time-space scales. While some of these challenges are inherent to the quantification approach, in many cases there are surmountable challenges that can be addressed by unifying existing P pool and flux datasets, standardizing and synchronizing data collection on pools and fluxes, and quantifying uncertainty. Though defined as a magnitude, the distribution and speciation of residual P is relatively less understood but shapes its utilization and environmental impacts. The form of residual P will vary by agroecosystem context due to edaphoclimatic-specific transformation of the accumulated P, which has implications for management (e.g., crop usage) and future policies (e.g., lag times in P loading from non-point sources). Quantifying the uncertainty in measuring residual P holds value beyond scientific understanding, as it supports prioritization of monitoring and management resources and inform policy.

Hybrid rice results from crossing a male-sterile line (the A line) with a pollen doner (the restorer or R line). In 3-line hybrid breeding systems, a fertile B line is also required to maintain A line populations. Heterosis is defined as a condition of traits whereby the hybrid exceeds the average of the parental lines. Heterobeltiosis is where the hybrid exceeds both parents. Hybrid rice may display heterosis/heterobeltiosis for growth, yield and resistance to herbivores, among other traits. In a greenhouse experiment, we assessed the frequency of heterosis for resistance to the brown planthopper (Nilaparvata lugans (BPH)), whitebacked planthopper (Sogatella furcifera (WBPH)) and yellow stemborer (Scirpophaga incertulas (YSB)) in eight hybrids under varying soil nitrogen conditions. We also assessed plant biomass losses due to herbivore feeding as an approximation of tolerance (the plant\'s capacity to compensate for damage). Nitrogen reduced resistance to all three herbivores but was also associated with tolerance to WBPH and YSB based on improved plant survival, growth and/or yields. Plant biomass losses per unit weight of WBPH also declined under high nitrogen conditions for a number of hybrids, and there were several cases of overcompensation in rice for attacks by this herbivore. There was one case of nitrogen-related tolerance to BPH (increased grain yield) for a hybrid line with relatively high resistance, likely due to quantitative traits. Heterosis and heterobeltiosis were not essential to produce relatively high herbivore resistance or tolerance across hybrids.

The evolution from conventional to modern agricultural practices, characterized by Agriculture 4.0 principles such as the application of innovative materials, smart water, and nutrition management, addresses the present-day challenges of food supply. In this context, polymer hydrogels have become a promising material for enhancing agricultural productivity due to their ability to retain and then release water, which can help alleviate the need for frequent irrigation in dryland environments. Furthermore, the controlled release of fertilizers by the hydrogels decreases chemical overdosing risks and the environmental impact associated with the use of agrochemicals. The potential of polymer hydrogels in sustainable agriculture and farming and their impact on soil quality is revealed by their ability to deliver nutritional and protective active ingredients. Thus, the impact of hydrogels on plant growth, development, and yield was discussed. The question of which hydrogels are more suitable for agriculture-natural or synthetic-is debatable, as both have their merits and drawbacks. An analysis of polymer hydrogel life cycles in terms of their initial material has shown the advantage of bio-based hydrogels, such as cellulose, lignin, starch, alginate, chitosan, and their derivatives and hybrids, aligning with sustainable practices and reducing dependence on non-renewable resources.

A pot experiment was conducted to investigate the combined effects of different nitrogen fertilizer levels (5, 25, and 45 kg of pure nitrogen per 667 m²) and biochar concentrations (0, 0.7, 1.4, and 2.1%) on the growth, yield, and fruit quality of pepper. The findings indicated that a combination of 25 kg/667 m2 of nitrogen and either 0.7% or 1.4% biochar significantly enhanced plant growth, yield, and fruit quality. Specifically, the N2 treatment (25 kg of pure nitrogen per 667 m²) increased substrate porosity, alkali-hydrolyzed nitrogen content, and available phosphorus content. It also boosted root activity and superoxide dismutase activity in pepper leaves, resulting in increased yield and better fruit quality. Furthermore, the proper addition of biochar (0.7-1.4% by weight) enhanced the physical and chemical properties of the substrate, including increased chlorophyll content and enzyme activity in plants, thereby leading to improved overall plant growth, yield, and fruit quality.

Agricultural systems in the 21st Century face the double challenge of achieving climate neutrality while maintaining food security. Synthetic fertilizers rich in nitrogen (N-fertilizers) boost agricultural production at the expense of increasing climate impact. Public policies, such as the Farm-to-Fork (F2F) Strategy, aim to reduce the extensive use of N-fertilizers with the ultimate goal of achieving a climate neutral European Union (EU). However, the strong link between N-fertilizers and GHG emissions (i.e., CO2, CH4 and, especially, N2O) highlights the need to better understand the climate impact of this sector. The present study conducts a climate impact analysis of Spanish N-fertilizer sector for two periods: (i) from 1960 to 2020 using real data and (ii) from 2021 to 2100 considering five forecasted scenarios. The scenarios range from business-as-usual practices to a full accomplishment of the goals pursued by the EU\'s F2F strategy. The system\'s climate stability and neutrality are analysed for the different scenarios based on radiative forcing (RF) metrics. Additionally, the study evaluates the short-term impact of the EU decarbonization goals on the climate impact of the Spanish N-fertilizer sector. The results of the study illustrate that the long-lasting climate impact of N2O and CO2 emissions compromise the capacity of N-fertilizer sector to achieve climate stability and approach climate neutrality. However, the decarbonisation of transport and N-fertilizer production activities is an important driver to substantially reduce the life cycle CH4 and CO2 emissions in the Spanish N-fertilizer sector. The results also highlight that more severe reductions on N-cycles than those suggested by the EU\'s F2F are required, especially to reduce the long-lasting N2O emissions in the N-fertilizer sector. Overall, the study concludes that using RF-based metrics increases robustness and transparency of climate assessments, which is necessary for a higher integration of climate science within public policymaking.

The agricultural sector uses 70% of the world\'s freshwater. As clean water is extracted, groundwater quality decreases, making it difficult to grow crops. Brackish water desalination is a promising solution for agricultural areas, but the cost is a barrier to adoption. This study investigated the performance of the fertilizer drawn forward osmosis (FDFO) process for brackish water desalination using response surface methodology (RSM) and artificial neural network (ANN) approaches. The RSM model was used to identify the optimal operating conditions, and the ANN model was used to predict the water flux (Jw) and reverse solute flux (Js). Both models achieved high accuracy, with RSM excelling in predicting Js (R2 = 0.9614) and ANN performing better for Jw (R2 = 0.9801). Draw solution (DS) concentration emerged as the most critical factor for both models, having a relative importance of 100% for two outputs. The optimal operating conditions identified by RSM were a DS concentration of 22 mol L-1, and identical feed solution (FS) and DS velocities of 8.1 cm s-1. This configuration yielded a high Jw of 4.386 LMH and a low Js of 0.392 gMH. Furthermore, the study evaluated the applicability of FDFO for real brackish groundwater. The results confirm FDFO\'s potential as a viable technology for water recovery in agriculture. The standalone FO system proves to be less energy-intensive than other desalination technologies. However, FO exhibits a low recovery rate, which may necessitate further dilution for fertigation purposes.

Thermophilic semi-continuous composting (TSC) is effective for kitchen waste (KW) treatment, but large amounts of NH3-rich odorous gas are generated. This study proposes a TSC-biofiltration (BF) two-stage process. Compost from the front-end TSC was used as the packing material in the BF to remove NH3 from the exhaust gas. The BF process was effective in removing up to 83.7 % of NH3, and the NH3 content was reduced to < 8 ppm. Seven days of BF improved the quality of the product from TSC by enhancing the germination index to 134.6 %, 36.5 % higher than that in the aerated-only group. Microbial community analysis revealed rapid proliferation and eventual dominance in the BF of members related to compost maturation and the nitrogen cycle from Actinobacteria, Proteobacteria, Chloroflexi, and Bacteroidetes. The results suggest that the TSC-BF two-stage process is effective in reducing NH3 emissions from TSC and improving compost quality.