In recent years, more sophisticated DNA technologies for genotyping have enabled considerable progress in various fields such as clinical genetics, archaeogenetics and forensic genetics. DNA samples previously rejected as too challenging to analyze due to low amounts of degraded DNA can now provide useful information. To increase the chances of success with the new methodologies, it is crucial to know the fragment size of the template DNA molecules, and whether the DNA in a sample is mostly single or double stranded. With this knowledge, an appropriate library preparation method can be chosen, and the DNA shearing parameters of the protocol can be adjusted to the DNA fragment size in the sample. In this study, we first developed and evaluated a user-friendly fluorometry-based protocol for estimation of DNA strandedness. We also evaluated different capillary electrophoresis methods for estimation of DNA fragmentation levels. Next, we applied the developed methodologies to a broad variety of DNA samples processed with different DNA extraction protocols. Our findings show that both the applied DNA extraction method and the sample type affect the DNA strandedness and fragmentation. The established protocols and the gained knowledge will be applicable for future sequencing-based high-density SNP genotyping in various fields.

Little is known about the underlying mechanisms that contribute to the persistence and degradation of DNA within soil. The goals of this study are to determine the duration of mitochondrial DNA (mtDNA) and nuclear DNA (nuDNA) persistence in soils enriched by surface-level human decomposition and to better understand the contribution of environmental factors. The surface-level decomposition of three human cadavers was documented over 11 weeks. Based on quantitative PCR results, we found nuDNA to persist in soils six weeks post-placement, while mtDNA was recoverable for the entire 11-week decomposition period. Principle components analyses and Spearman\'s rank correlations revealed that (1) time, (2) total body score, and (3) weekly average air temperature were significantly correlated with concentrations of nuDNA and mtDNA in soil, suggesting these factors play a role in the degradation of DNA in soils.

Bones and teeth represent a common finding in ancient DNA studies and in forensic casework, even after a long burial. Genetic typing is the gold standard for the personal identification of skeletal remains, but there are two main factors involved in the successful DNA typing of such samples: (1) the set-up of an efficient DNA extraction method; (2) the identification of the most suitable skeletal element for the downstream genetic analyses. In this paper, a protocol based on the processing of 0.5 g of bone powder decalcified using Na2EDTA proved to be suitable for a semi-automated DNA extraction workflow using the Maxwell® FSC DNA IQ™ Casework Kit (Promega, Madison, WI, USA). The performance of this method in terms of DNA recovery and quality was compared with a full demineralisation extraction protocol based on Qiagen technology and kits. No statistically significant differences were scored according to the DNA recovery and DNA degradation index (p-values ≥ 0.176; r ≥ 0.907). This new DNA extraction protocol was applied to 88 bone samples (41 femurs, 19 petrous bones, 12 metacarpals and 16 molars) allegedly belonging to 27 World War II Italian soldiers found in a mass grave on the isle of Cres (Croatia). The results of the qPCR performed by the Quantifiler Human DNA Quantification kit showed values above the lowest Limit of Quantification (lLOQ; 23 pg/µL) for all petrous bones, whereas other bone types showed, in most cases, lower amounts of DNA. Replicate STR-CE analyses showed successful typing (that is, >12 markers) in all tests on the petrous bones, followed by the metacarpals (83.3%), femurs (52.2%) and teeth (20.0%). Full profiles (22/22 autosomal markers) were achieved mainly in the petrous bones (84.2%), followed by the metacarpals (41.7%). Stochastic amplification artefacts such as drop-outs or drop-ins occurred with a frequency of 1.9% in the petrous bones, whereas they were higher when the DNA recovered from other bone elements was amplified (up to 13.9% in the femurs). Overall, the results of this study confirm that petrous bone outperforms other bone elements in terms of the quantity and quality of the recovered DNA; for this reason, if available, it should always be preferred for genetic testing. In addition, our results highlight the need for accurate planning of the DVI operation, which should be carried out by a multi-disciplinary team, and the tricky issue of identifying other suitable skeletal elements for genetic testing. Overall, the results presented in this paper support the need to adopt preanalytical strategies positively related to the successful genetic testing of aged skeletal remains in order to reduce costs and the time of analysis.

Bombyx mori cecropin A (Bmcecropin A) has antibacterial, antiviral, anti-filamentous fungal and tumour cell inhibition activities and is considered a potential succedaneum for antibiotics. We clarified the antibacterial mechanism and structure-activity relationships and then directed the structure-activity optimization of Bmcecropin A. Firstly, we found Bmcecropin A shows a strong binding force and permeability to cell membranes like a detergent; Bmcecropin A could competitively bind to the cell membrane with the cell membrane-specific dye DiI, then damaged the membrane for the access of DiI into the cytoplasm and leading to the leakage of electrolyte and proteins. Secondly, we found Bmcopropin A could also bind to and degrade DNA; furthermore, DNA library polymerase chain reaction (PCR) results indicated that Bmcecropin A inhibited DNA replication by non-specific binding. In addition, we have identified C-terminus amidation and serine-lysine- glycine (SLG) amino acids of Bmcecropin A played critical roles in the membrane damage and DNA degradation. Based on the above results, we designed a mutant of Bmcecropin A (E9 to H, D17 to K, K33 to A), which showed higher antibacterial activity, thermostability and pH stability than ampicillin but no haemolytic activity. Finally, we speculated that Bmcecropin A damaged the cell membrane through a carpet model and drew the schematic diagram of its antibacterial mechanism, based on the antibacterial mechanism and the three-dimensional configuration. These findings yield insights into the mechanism of antimicrobial peptide-pathogen interaction and beneficial for the development of new antibiotics.

The assessment of degradation is crucial for the analysis of human DNA samples isolated from forensic specimens. Forensic quantitative PCR (qPCR) assays can include multiple targets of varying amplicon size that display differential amplification efficiency, and thus different concentrations, in the presence of degradation. The possibility of deriving information on DNA degradation was evaluated in a forensic qPCR assay not specifically designed to detect DNA fragmentation, the Plexor HY (Promega), by calculating the ratio between the estimated concentrations of autosomal (99 bp) and Y-chromosomal (133 bp) targets (\"[Auto]/[Y]\"). The [Auto]/[Y] ratio measured in 57 formalin-fixed, paraffin-embedded samples was compared to a quality score (QS) calculated for corresponding STR profiles using quantitative data (allele peak height). A statistically significant inverse correlation was observed between [Auto]/[Y] and QS (R = -0.65, p < 0.001). The [Auto]/[Y] values were highly correlated (R = 0.75, p < 0.001) with the \"[Auto]/[D]\" values obtained using the PowerQuant (Promega) assay, expressly designed to detect DNA degradation through simultaneous quantification of a short (Auto) and a long (D) autosomal target. These results indicate that it is possible to estimate DNA degradation in male samples through Plexor HY data and suggest an alternative strategy for laboratories lacking the equipment required for the assessment of DNA integrity through dedicated qPCR assays.

Polymerase chain reaction (PCR) is an important tool for exogenous gene acquisition and recombinants identification. There exist two problems when using Serratia marcescens as a template for PCR amplification: amplified PCR products are rapidly degraded, and the results of PCR amplification are unstable. The aim of the present work was to elucidate the reasons for this. By mixing PCR products amplified from Escherichia coli DH5α with S. marcescens supernatant or pellet, we found that the DNA-degrading substance in S. marcescens is thermally resistant and present both intracellularly and extracellularly. We then determined that it is protein, and most likely S. marcescens nuclease, that degrades PCR products since the addition of SDS and EDTA can effectively inhibit or block the degradation of PCR products. By knocking out the S. marcescens nuclease encoding gene, nucA, we confirmed that the nuclease is responsible for the degradation of PCR products and the instability of PCR amplification. This work is the first to show that the S. marcescens nuclease is temporarily and partially inhibited by high temperatures during PCR and recovers rapidly at room temperature after PCR.

Giardiasis is a prevalent parasitic diarrheal disease caused by Giardia lamblia, affecting people worldwide. Recently, the availability of several drugs for its treatment has highlighted issues such as multidrug resistance, limited effectiveness and undesirable side effects. Therefore, it is necessary to develop alternative new drugs and treatment strategies that can enhance therapeutic outcomes and effectively treat giardiasis. Natural compounds show promise in the search for more potent anti-giardial agents. Our investigation focused on the effect of Andrographolide (ADG), an active compound of the Andrographis paniculata plant, on Giardia lamblia, assessing trophozoite growth, morphological changes, cell cycle arrest, DNA damage and inhibition of gene expression associated with pathogenic factors. ADG demonstrated anti-Giardia activity almost equivalent to the reference drug metronidazole, with an IC50 value of 4.99 μM after 24 h of incubation. In cytotoxicity assessments and morphological examinations, it showed significant alterations in trophozoite shape and size and effectively hindered the adhesion of trophozoites. It also caused excessive ROS generation, DNA damage, cell cycle arrest and inhibited the gene expression related to pathogenesis. Our findings have revealed the anti-giardial efficacy of ADG, suggesting its potential as an agent against Giardia infections. This could offer a natural and low-risk treatment option for giardiasis, reducing the risk of side effects and drug resistance.

We used a nanopore sequencer to quantify DNA fragments > 10,000 bp in size and then evaluated their relationship with short-term bloodstain age. Moreover, DNA degradation was investigated after bloodstains were wetted once with water. Bloodstain samples on cotton gauze were stored at room temperature and low humidity for up to 6 months. Bloodstains stored for 1 day were wetted with nuclease-free water, allowed to dry, and stored at room temperature and low humidity for up to 1 week. The proportion of fragments > 20,000 bp in dry bloodstains tended to decrease over time, particularly for fragments > 50,000 bp in size. This trend was modeled using a power approximation curve, with the highest R2 value (0.6475) noted for fragments > 50,000 bp in size; lower values were recorded for shorter fragments. The proportion of longer fragments was significantly reduced in bloodstains that were dried after being wetted once, and there was significant difference in fragments > 50,000 bp between dry conditions and once-wetted. This result suggests that even temporary exposure to water causes significant DNA fragmentation, but not extensive degradation. Thus, bloodstains that appear fresh but have a low proportion of long DNA fragments may have been wetted previously. Our results indicate that evaluating the proportion of long DNA fragments yields information on both bloodstain age and the environment in which they were stored.

Interest in recovering DNA from the surface of ammunition evidence for genotyping has increased over the past few years. Numerous studies have examined a variety of methods to maximize DNA recovery from these types of challenging samples, but successful DNA profiling has been inconsistent. Low amounts of DNA and PCR inhibition due to metal ions have been suggested as the leading causes of poor results; however, no study quantitatively examined the presence of metal ions at various stages of the DNA analysis workflow from DNA collection through to amplification. In this study, the effectiveness of six different DNA collection and purification methods commonly used by forensic laboratories to process brass ammunition for DNA evidence was investigated. The amount of copper, zinc, and other metals co-recovered from fired and unfired brass casings during DNA collection (using numerous soaking, swabbing, and direct PCR protocols) was quantified via Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES). This same panel of metals was subsequently quantified after DNA lysis and purification steps. Results demonstrated that low amounts of DNA, DNA damage, and degradation are more detrimental to STR typing results than PCR inhibition, as metal ions were successfully removed by all DNA purification methods tested. Furthermore, the use of metal ion chelators increased the amount of DNA recovered and number of reportable STR alleles. This research informs the forensic community on the most effective way to collect and process trace amounts of biological material from brass ammunition and similar evidence.

DNA degradation in biological material needs to be better understood. Bloodstains on washed clothing are disturbed by washing procedures, sometimes transferred to other fabrics, often with latent bloodstains and usually with significantly degraded DNA. The samples (cotton fabric with bloodstains) are divided into six main groups, depending on the washing method regarding water temperature (95, 60, and 30 °C) and the detergent use. After completing the washing process, samples were stored for a certain period (1 day to 6 months) and subsequently analyzed. Analyses were performed using standard protocols and commercial kits to measure the remaining DNA quantity (concentration) and DNA degradation index in the processed samples. Our results revealed that the high washing temperature (60 and 95 °C) and the application of detergent have a synergic action on DNA degradation, while at 30 °C this effect is absent. Furthermore, the effect of detergent on accelerated DNA degradation is observed about a month after the washing. This delayed effect of detergent has no explanation in current literature data. To obtain optimal results from the bloodstains, we recommended that the period from the crime event and attempted cleaning by a perpetrator to the laboratory analysis should be less than 1 month.