C-arm linacs have been used widely to treat multiple cranial metastases using stereotactic radiosurgery (SRS). A new generation of O-ring linacs offer several workflow advantages when compared to C-arm platforms. However, O-ring linacs are not able to employ couch rotations for noncoplanar beams used in SRS treatments. This study was conducted in order to simulate further possible developments of O-ring treatment units by assessing their geometrical efficiency. In this work we compare the plan quality for C-arm versus an O-ring platform including metrics that are relevant to SRS for multiple metastases. The comparison is conducted by incorporating tilted arcs on the O-ring platform therefore introducing noncoplanarity. Total 40 patients previously treated for SRS with 20 Gy single fraction were replanned for C-arm with a standard noncoplanar 5-arc arrangement and O-ring with both coplanar and noncoplanar beams. For the O-ring plans, we considered a default 3-arc coplanar arrangement, as well as 3- and 5-arc arrangements with arcs tipped up to 10 degrees from the axial plane. Target coverage, organ-at-risk (OAR) doses, monitor unit (MU) efficiency, conformity and gradient indices were assessed for all plans. For most metrics the O-ring geometries, even the coplanar arrangement, produced statistically comparable results to the C-arm. Small but significant differences were found for the 3 arc O-ring for PTV: D90%, D2% and MU/Gy and for the 5 arc O-ring at D2% when both were compared to the C-arm. Cumulative dose volume histograms (DVHs) for normal brain showed a cross-over between the C-arm and coplanar O-ring geometry at a low dose (2.3 ± 1.8 Gy), with O-ring associated with higher volumes above this cross-over dose. However, no statistical difference was seen in the brainstem, optic pathway and volumes of normal brain receiving 12 Gy or 20 Gy. This study has found that O-ring geometry linacs can produce SRS plans of comparable quality to those from a C-arm for multiple cranial metastases.

OBJECTIVE: A single therapeutic approach is not always successful in the treatment of herpes zoster neuralgia, and the appropriate combination of different treatments deserves further exploration. In this study, we investigated the clinical efficacy of high-voltage long-duration pulsed radiofrequency (PRF) combined with stellate ganglion block (SGB) in the acute phase of thoracic and dorsal herpes zoster neuralgia under dual guidance of ultrasound and C-arm.
METHODS: 79 cases of acute zoster neuralgia were grouped premised upon differing therapeutic approaches: standard voltage PRF (group S, the temperature, duration, pulse width, frequency and voltage were set to 42 °C, 300 s, 20 ms, 2 Hz, and 45 V), high-voltage long-duration PRF (group H, parameters of PRF were set to 42 °C, 900 s, 20 ms, 2 Hz, and 90 V, respectively), and high-voltage long-duration PRF combined with SGB (group C, parameter settings for PRF are the same as those for group H). The therapeutic outcomes were assessed utilizing the numeric rating scale (NRS), Pittsburgh sleep quality index (PSQI), and Hamilton anxiety rating scale (HAMA). The incidence of clinically significant postherpetic neuralgia post-treatment had been documented.
RESULTS: Compared to baseline, scores of NRS, PSQI, and HAMA at each time point post-treatment decreased across all groups, and the decrease was more significant in the C group than in the S group. At the later stage of treatment, the consumption of pregabalin and tramadol and the plasma levels of interleukin-6 and galectin-3 in the C group were significantly lower than those in the S group. The incidence of PHN in the C group was significantly lower than in the S group.
CONCLUSIONS: The combination of high-voltage long-duration PRF combined with SGB under dual guidance of ultrasound and C-arm represents a safe, effective, environmentally friendly, and cost-efficient method for treating AZN, significantly improving sleep quality, alleviating anxiety, and reducing the risk of PHN occurrence.

OBJECTIVE: To study the value of three-dimensional CT (3D-CT) reconstruction by comparing the surgical effects of C-arm and 3D-CT in the treatment of trigeminal neuralgia (TN) by percutaneous balloon compression (PBC).
METHODS: A total of 136 patients were included from May 2018 to February 2019. Among them, 65 patients underwent PBC treatment with 3D-CT and others with C-arm. During 3D-CT-guided operation, 3D-CT reconstruction software was used to analyze and measure the distances from the internal orifice of Foramen ovale (FO-I) and the external orifice of Foramen ovale (FO-E) to the top of the balloon (BT) and the petrous bone ridge (PR). The data, including the angle between the puncture needle direction and the zygomatic arch, petrous bone ridge, and slope, were used to assist the puncture and balloon plasty. Postoperative follow-up for more than five years was performed to evaluate the efficacy and pain recurrence.
RESULTS: The distance from FO-E to PR was (2.10 ± 0.16)cm, the average distance from FO-I to BT was (2.39 ± 0.07)cm, and the average angles between the puncture needle and zygomatic arch, slope, and petrous bone ridge were (56.19 ± 5.59)°, (69.12 ± 6.92)°, and (104.49 ± 6.46)°, respectively. One (1.5 %) patient in the 3D-CT group and three (4.2 %) patients in the C-arm group failed to receive PBC treatment because of failure of FO puncture (P = 0.032).In terms of postoperative pain improvement, 3D-CT group achieved better results than the C-arm group (P = 0.043). There were no significant differences in the rates of major complications and short-term recurrence (P = 0.926) between the two groups after surgery, but the five-year recurrence rate in the 3D-CT group was lower than that in the C-arm group (P = 0.032).
CONCLUSIONS: By guiding the angle and depth of puncture, the intraoperative application of 3D-CT reconstruction technology can improve the accuracy of foramen ovale puncture and alleviate postoperative pain, and also maintain long-term postoperative pain relief, which can be used as a potentially better guidance method to improve the surgical efficacy of PBC.

UNASSIGNED: To investigate on three-dimensional (3D) fusion images the apposition of low-profile visualized intraluminal support (LVIS) stents in intracranial aneurysms after treatment and assess inter-rater reliability.
UNASSIGNED: Records of all patients with unruptured intracranial aneurysms who were treated with the LVIS stent were retrospectively accessed and included in this study. Two neurosurgeons evaluated the presence of malapposition between the vessel walls and the stent trunk (crescent sign) and the vessel wall and the stent edges (edge malappostion) on 3D fusion images. These images were high-resolution cone-beam computed tomography images of the LVIS stent fused with 3D-digital subtraction angiography images of the vessels. Associations between malapposition and aneurysm location were assessed by Fisher\'s exact test, and inter-rater agreement was estimated using Cohen\'s kappa statistic.
UNASSIGNED: Forty consecutive patients were included. In all patients, 3D fusion imaging successfully visualized the tantalum helical strands and the closed-cell structure of the nitinol material of the low-profile visualized intraluminal support. A crescent sign was observed in 27.5 % and edge malapposition in 47.5 % of the patients. Malapposition was not significantly associated with location (p = 0.23 crescent sign, p = 0.07 edge malapposition). Almost perfect (κ = 0.88) and substantial (κ = 0.76) agreements between the two raters were found for the detection of crescent signs and edge appositions, respectively.
UNASSIGNED: 3D fusion imaging provided clear visualization of the LVIS stent and parent arteries, and could detect malapposition with excellent inter-rater reliability. This technique may provide valuable guidance for surgeons in determining postoperative management.

Objective.Digitally reconstructed radiography (DRR) plays an important role in the registration of intraoperative x-ray and preoperative CT images. However, existing DRR algorithms often neglect the critical isocentric fixed angle irradiation (IFAI) principle in C-arm imaging, resulting in inaccurate simulation of x-ray images. This limitation degrades registration algorithms relying on DRR image libraries or employing DRR images (DRRs) to train neural network models. To address this issue, we propose a novel IFAI-based DRR method that accurately captures the true projection transformation during x-ray imaging of the human body.Approach.By strictly adhering to the IFAI principle and utilizing known parameters from intraoperative x-ray images paired with CT scans, our method successfully simulates the real projection transformation and generates DRRs that closely resemble actual x-ray images.Main result.Experimental results validate the effectiveness of our IFAI-based DRR method by successfully registering intraoperative x-ray images with preoperative CT images from multiple patients who underwent thoracic endovascular aortic procedures.Significance. The proposed IFAI-based DRR method enhances the quality of DRR images, significantly accelerates the construction of DRR image libraries, and thereby improves the performance of x-ray and CT image registration. Additionally, the method has the generality of registering CT and x-ray images generated by large C-arm devices.

OBJECTIVE: Digitally reconstructed radiographs (DRRs) are planar two-dimensional (2D) X-rays derived from a three-dimensional (3D) computed tomography (CT) dataset. DRRs allow the simulation of radiographs of all desired views and facilitate preoperative planning. However, orthopedic surgeons rely on C-arm fluoroscopic imaging during surgery to verify fracture reduction and implant placement. Pincushion distortion represents a technical limitation of fluoroscopic imaging, resulting in a greater distance between points at the periphery of the image compared to the center. This project, therefore, aimed to assess the image correlation between digitally reconstructed radiographs (DRRs) and fluoroscopic imaging (C-arm) using conventional radiographs (X-ray) as a control.
METHODS: A 3D-printed cubic prototype and an anatomical humerus bone model were used. C-arm fluoroscopic radiographs and conventional X-ray images were taken in an anteroposterior (AP) view at 10-degree steps while rotating the objects from 0 to 90 degrees. CT scans were made and used to compute and export DRRs in AP view at 10-degree rotational steps from 0 to 90 degrees. The surface area (cm2) was measured and compared between the different modalities. For automated image analysis of the anatomical humerus model, matching (%) between modalities was calculated using the structural similarity index (SSIM).
RESULTS: The overall regression was statistically significant in all models, with an R2 >0.99 when comparing all three imaging modalities of the prototype. Surface correlation in the anatomical humerus model was R2 0.99 between X-ray and C-arm and R2 0.95 between C-arm and X-ray to DRRs, respectively. The SSIM was highest for comparing DRR and C-arm images (0.84±0.01%).
CONCLUSIONS: The study indicates a strong agreement between digitally reconstructed radiographs and X-ray/C-arm images. DRRs, therefore, represent a valuable tool for research and clinical application.

暂无摘要。

BACKGROUND: Pedicle screw placement is a widely accepted surgical procedure for spinal fixation. Despite increases in knowledge about and expertise in pedicle screw insertion techniques, overall reported screw misplacement rates are still high. Spinal neuronavigation and intraoperative computed tomography (CT) imaging improves the accuracy and safety of pedicle screw placement through the continuous monitoring of screw trajectory. The purpose of this study is to compare pedicle screw placement under an O-arm intraoperative imaging system assisted by the StealthStation navigation system with screw placement under conventional fluoroscopy (C-arm).
METHODS: For 222 patients, 1288 implanted pedicle screws in total were evaluated between 2018 and 2020. All patients underwent pedicle screw placement in the thoracic and lumbosacral regions through a posterior approach. Moreover, 107 patients (48.2%), 48 men and 59 women, underwent freehand screw placement under conventional fluoroscopy (C-arm group), whereas 115 patients (51.8%), 53 men and 62 women, underwent pedicle screw insertion under O-arm guidance with the help of the StealthStation neuronavigation system (Medtronic Navigation, Louisville, CO, USA) (O-arm group). Data were recorded and retrospectively analyzed. The accuracy of pedicle screw placement was postoperatively examined by using CT imaging and analyzed according to the Gertzbein-Robbins classification.
RESULTS: Of the 1288 pedicle screws, 665 (51.6%) were placed with C-arm image-guided assistance with a mean of 6.21 ± 2.1 screws per patient and 643 (48.4%) with O-arm image-guided assistance with a mean of 5.59 ± 1.6 screws. The average time for the screw placement procedure was 3:57 ± 1:07 h in the C-arm group and 4:21 ± 1:41 h in the O-arm group. A correct screw placement was detected in 92.78% of patients in the C-arm group and in 98.13% of patients in the O-arm group. Medial cortical breach was shown in 13 Grade B screws (1.95%), 19 Grade C (2.86%), 14 Grade D (2.11%), and two Grade E (0.3%) in the C-arm group, whereas this was shown in 11 Grade B screws (1.71%) and one Grade C (0.16%) in the O-arm group. Lateral breach occurred in eight screws in both groups. Anterior vertebral body breach was shown in eight screws in the C-arm group, whereas it was shown in four screws in the O-arm group. Reoperation for screw misplacement was mandatory in five patients in the C-arm group and two patients in the O-arm group.
CONCLUSIONS: Pedicle screw placement under an O-arm intraoperative imaging system assisted by spinal navigation showed greater accuracy compared with placement under conventional fluoroscopic control, thus avoiding the onset of major postoperative complications. Notably, a reduction in medial and anterior breaches has been demonstrated.

Malrotation of tibial fractures after intramedullary nailing remains an unsolved problem. The incidence of malrotation >10° on computer tomography (CT) measurements has been high in cases of tibial shaft fractures. We aimed to assess the accuracy of a novel method for the measurement of tibial rotation using lateral axis views of the C-arm, to prevent postoperative malrotation. Consecutive patients with fresh tibial fractures treated by intramedullary nailing between January 2021 and December 2022 were included prospectively. Baseline tibial external rotation (TER) was measured preoperatively on the non-injured normal side with CT. After proximal or distal screw fixation, the C-arm TER was measured based on lateral axis views (tibial posterior condylar axis and bimalleolar axis views). The C-arm TER was compared with the normal-side CT TER; when the difference was ≤5°, the procedure progressed, and screw fixation was carried out. The fractured-side CT TER was measured one week post-operatively. Twenty patients (13 males and seven females) were included. The mean age was 52.4 years. The Orthopaedic Trauma Association (OTA) classification was 42A in five patients, 42B in twelve patients, and 42C in three patients. The mean difference between C-arm TER and fractured-side CT TER was 2.3°±1.7°, with Pearson correlation coefficient r=0.968. The mean difference between normal-side CT TER and fractured-side CT TER was 4.8°±2.8°, and there was no incidence of malrotation >10°. The C-arm method was highly accurate in estimating CT measurements and preventing tibial malrotation.

OBJECTIVE: Utilization of navigation improves pedicle screw accuracy in adolescent idiopathic scoliosis (AIS). Our center switched from intraoperative CT (ICT) to an optical navigation system that utilizes pre-operative CT (PCT). We aim to evaluate the radiation dose and operative time for low-dose ICT compared to standard and low-dose PCT used for optical navigation in AIS patients undergoing posterior spinal fusion.
METHODS: A single-center matched-control cohort study of 38 patients was conducted. Nineteen patients underwent ICT navigation (O-arm) and were matched by sex, age, and weight to 19 patients who underwent PCT for use with an optical-guided navigation (7D, Seaspine). A total of 418 levels were instrumented and reviewed. PCT was either a standard dose (N = 7) or a low dose (N = 12). The mean volume CT dose index, dose-length product, overall effective dose (ED), ED per level instrumented, and operative time per level were compared.
RESULTS: ED per level instrumented was 0.061 ± 0.029 mSv in low-dose PCT and 0.14 ± 0.05 mSv in low-dose ICT (p < 0.0001). ED per level instrumented was significantly higher in standard PCT (1.46 ± 0.39 vs. 0.14 ± 0.03 mSv; p < 0.0001). Mean operative time per level was 31 ± 7 min for ICT and 33 ± 3 min for PCT (p = 0.628).
CONCLUSIONS: Low-dose PCT resulted in 0.70 mSv exposure per case and 31 min per level, standard-dose was 16.95 mSv, while ICT resulted in 1.34-1.62 mSv and a similar operative time. Use of a standard-dose PCT involves radiation exposure about 9 times higher than ICT and 23 times higher than low-dose PCT per level instrumented.
METHODS: Level III.