Water molecules pose a significant obstacle to conventional adhesive materials. Nevertheless, some marine organisms can secrete bioadhesives with remarkable adhesion properties. For instance, mussels resist sea waves using byssal threads, sandcastle worms secrete sandcastle glue to construct shelters, and barnacles adhere to various surfaces using their barnacle cement. This work initially elucidates the process of underwater adhesion and the microstructure of bioadhesives in these three exemplary marine organisms. The formation of bioadhesive microstructures is intimately related to the aquatic environment. Subsequently, the adhesion mechanisms employed by mussel byssal threads, sandcastle glue, and barnacle cement are demonstrated at the molecular level. The comprehension of adhesion mechanisms has promoted various biomimetic adhesive systems: DOPA-based biomimetic adhesives inspired by the chemical composition of mussel byssal proteins; polyelectrolyte hydrogels enlightened by sandcastle glue and phase transitions; and novel biomimetic adhesives derived from the multiple interactions and nanofiber-like structures within barnacle cement. Underwater biomimetic adhesion continues to encounter multifaceted challenges despite notable advancements. Hence, this work examines the current challenges confronting underwater biomimetic adhesion in the last part, which provides novel perspectives and directions for future research.

Wound closure in surgeries is traditionally achieved using invasive methods such as sutures and staples. Adhesion-based wound closure methods such as tissue adhesives, sealants, and hemostats are slowly replacing these methods due to their ease of application. Although several chemistries have been developed and used commercially for wound closure, there is still a need for better tissue adhesives from the point of view of toxicity, wet-adhesion strength, and long-term bonding. Catechol chemistry has shown great promise in developing wet-set adhesives that meet these criteria. Herein, we have studied the biocompatibility of a catechol-based copolymer adhesive, poly([dopamine methacrylamide]-co-[methyl methacrylate]-co-[poly(ethylene glycol) methyl ether methacrylate]) or poly(catechol-MMA-OEG), which is soluble in water. The adhesive was injected subcutaneously in a mouse model on its own and in combination with a sodium periodate crosslinker. After 72 h, 4 weeks, and 12 weeks, the mice were euthanized and subjected to histopathological analysis. Both adhesives were present and still palpable at the end of 12 weeks. The moderate inflammation observed for the poly(catechol-MMA-OEG) cohort at 72 h had reduced to mild inflammation at the end of 12 weeks. However, the moderate inflammatory response observed for the poly(catechol-MMA-OEG) + crosslinker cohort at 72 h had not subsided at 12 weeks.

The aim of this research work was to investigate the influence of parameters such as particle size, mass/solvent ratio, temperature and spray drying on the tannin extraction process in order to develop cost-effective methods with better environmental and structural performance. The pods of Acacia nilotica ssp. tomentosa (ANT) were fractionated into three fractions, coarse fraction (C) (>2 mm), medium fraction (M) (1-2 mm), and fine fraction (F) < 1 mµ), and extracted with different water-to-pod ratios (2:1, 4:1 and 6:1) at different temperatures (30, 50 and 70 °C). The best results were scaled up using the three fractions of ANT, its bark and the bark of Acacia seyal var. seyal (ASS). Part of their extract was spray dried. The tannin content and total polyphenolic materials were evaluated using standard methods. Their adhesives were tested for their tensile strength. Tannins of ASS were characterized by 13C NMR and MALDI-TOF. The results revealed that the fine fraction (F) gave the highest percentage of tannins in both small and scaled-up experiments. The results of the tensile strength conformed to the European standard. The 13C NMR spectra of ANT and ASS showed that the bark contained condensed tannins mainly consisting of procyanidins/prodelphinidin of 70%/30% and 60%/40%, respectively. MALDI-TOF spectra confirmed the results obtained by 13C NMR and detailed the presence of flavonoid monomers and oligomers, some of which were linked to short carbohydrate monomers or dimers.

The latest studies agree that meniscal tears that require surgery should be repaired whenever possible to avoid early-onset osteoarthritis secondary to meniscectomy. Unfortunately, there are several limitations associated with meniscal sutures, making it difficult to put into practice the theory behind the concept of saving the meniscus. Meanwhile, there is an exponential growth in the use of tissue adhesives for surgery, but finding one suited to meniscal repair remains a struggle. This review has two main goals (1) to compile the various bioadhesives used in this field and (2) to list the criteria for an ideal meniscal bioadhesive. The review was conducted in PubMed, Google Scholar, and Web of Science in November 2023 without date restrictions. The inclusion criteria were: Studies published in English and focusing on meniscal repair using bioadhesives. The exclusion criteria were: Studies published in languages other than English. Adhesives used in combination with sutures, as the aim was to determine the adhesive\'s capabilities for meniscal repair alone. Synthetic adhesives such as polycyanoacrylates, polyethylene glycol, polyurethanes, and polyesters. Among the 11 bioadhesives found, fibrin is the only one that has been studied in humans. There are advantages and disadvantages to all the bioadhesives identified but none that fully meet the requirements for meniscal repair. The anatomy of meniscal tissue is complex and poses unique challenges that are compounded by arthroscopic stresses. The future of meniscal repair probably lies in combining the advantages of several bioadhesives, and this area should be the focus of future research.

UNASSIGNED: Bioadhesion is the ability of materials to adhere to biological surfaces. Bioadhesives are substances which induce or promote bioadhesion. The internal application of bioadhesives is gaining popularity in recent years and is being increasingly utilized in vitreoretinal surgeries. The aim of this review is to discuss the various bioadhesives and their applications in vitreoretinal surgeries.
UNASSIGNED: PubMed, Google Scholar, ePub and Cochrane library database were used for literature selection. Keywords such as vitreoretinal surgery, bioadhesives, intraocular bioadhesives, glue, fibrin glue, cyanoacrylate glue and transforming growth factor were used individually and in differing combinations to perform a comprehensive systematic literature search.
UNASSIGNED: A total of 47 papers were retrieved and included in this review. Cyanoacrylate glue was the first bioadhesive to be utilized for vitreoretinal surgery in human eyes in 1976. The most common indications for the use of bioadhesives were in optic disc pit maculopathy, macular holes and rhegmatogenous retinal detachments.
UNASSIGNED: The use of intraocular bioadhesives in vitreoretinal surgery represents a significant and evolving area of interest within ophthalmic research. While the pioneering use of cyanoacrylate glue, fibrin glue and transforming growth factor beta demonstrated the possible use of intraocular adhesives, fibrin glue is the most widely used intraocular bioadhesive in vitreoretinal surgery.

A holistic biointegration of percutaneous bone-anchored metallic prostheses with both hard and soft tissues dictates their longevity in the human body. While titanium (Ti) has nearly solved osseointegration, soft tissue integration of percutaneous metallic prostheses is a perennial problem. Unlike the firm soft tissue sealing in biological percutaneous structures (fingernails and teeth), foreign body response of the skin to titanium (Ti) leads to inflammation, epidermal downgrowth and inferior peri-implant soft tissue sealing. This review discusses various implant surface treatments/texturing and coatings for osseointegration, soft tissue integration, and against bacterial attachment. While surface microroughness by SLA (sandblasting with large grit and acid etched) and porous calcium phosphate (CaP) coatings improve Ti osseointegration, smooth and textured titania nanopores, nanotubes, microgrooves, and biomolecular coatings encourage soft tissue attachment. However, the inferior peri-implant soft tissue sealing compared to natural teeth can lead to peri-implantitis. Toward this end, the application of smart multifunctional bioadhesives with strong adhesion to soft tissues, mechanical resilience, durability, antibacterial, and immunomodulatory properties for soft tissue attachment to metallic prostheses is proposed.

Nanocellulose-based tissue adhesives show promise for achieving rapid hemostasis and effective wound healing. Conventional methods, such as sutures and staples, have limitations, prompting the exploration of bioadhesives for direct wound adhesion and minimal tissue damage. Nanocellulose, a hydrolysis product of cellulose, exhibits superior biocompatibility and multifunctional properties, gaining interest as a base material for bioadhesive development. This study explores the potential of nanocellulose-based adhesives for hemostasis and wound healing using 3D printing techniques. Nanocellulose enables the creation of biodegradable adhesives with minimal adverse effects and opens avenues for advanced wound healing and complex tissue regeneration, such as skin, blood vessels, lungs, cartilage, and muscle. This study reviews recent trends in various nanocellulose-based 3D printed hydrogel patches for tissue engineering applications. The review also introduces various types of nanocellulose and their synthesis, surface modification, and bioadhesive fabrication techniques via 3D printing for smart wound healing.

Bioadhesives have been widely used in hemostasis and tissue repair, but the overmoist and wet nature of wound surface (due to the presence of blood and/or wound exudate) has led to poor wet adhesion of bioadhesives, which interrupts the continuous care of wounds. Here, a thirsty polyphenolic silk granule (Tan@SF-pwd-hydro), which absorbs blood and exudate to self-convert to robust bioadhesives (Tan@SF-gel-hydro) in situ, was facilely developed in this study for enhanced wet adhesion toward hemostasis and tissue repair. Tan@SF-pwd-hydro could shield wounds\' wetness and immediately convert itself to Tan@SF-gel-hydro to seal wounds for hemorrhage control and wound healing. The maximum adhesiveness of Tan@SF-gel-hydro over wet pigskin was as high as 59.8 ± 2.1 kPa. Tan@SF-pwd-hydro is a promising transformative dressing for hemostasis and tissue repair since its hemostatic time was approximately half of that of the commercial hemostatic product, CeloxTM, and its healing period was much shorter than that of the commercial bioadhesive product, TegadermTM. This pioneering study utilized adverse wetness over wounds to arouse robust adhesiveness by converting thirsty granules to bioadhesives in situ, creatively turning adversity into opportunities. The facile fabrication approach also offers new perspectives for manufacturing sustainability of biomaterials.

Biomaterials with excellent biocompatibility, mechanical performance, and self-recovery properties are urgently needed for tissue regeneration. Inspired by barnacle cement and spider silk, we genetically designed and overexpressed a fused protein (cp19k-MaSp1) composed of Megabalanus rosa (cp19k) and Nephila clavata dragline silk protein (MaSp1) in Pichia pastoris. The recombinant cp19k-MaSp1 exhibited enhanced adhesion capability beyond those of the individual proteins in both aqueous and non-aqueous conditions. cp19k-MaSp1 protein fiber scaffolds prepared through electrospinning have adequate hydrophilicity compared to cp19k and MaSp1 protein fiber scaffolds, and offer improved overall porosity compared to MaSp1 protein fiber scaffolds. The cp19k-MaSp1 protein fiber scaffolds showed excellent proteolytically stable properties because of only 9.6 % depletion after incubation in a biodegradation solution for 56 d. The cp19k-MaSp1 protein fiber scaffolds present remarkably high extreme tensile strength (112.7 ± 11.6 MPa) and superior ductility (438.4 ± 43.9 %) compared with cp19k (34.4 ± 8.1 MPa, 115.4 ± 32.7 %) and MaSp1 protein fiber scaffolds (65.8 ± 9.3 MPa, 409.6 ± 23.1 %), also 68.4 % of tensile strength was recovered by incubation in K+ buffer after multiple stretches, which create a favorable cell adhesion, growth, and proliferation environment for human umbilical vein endothelial cells (HUVECs). The improved biocompatibility, extensive adhesion, mechanical strength, and self-recovery properties make the bioinspired synthetic cp19k-MaSp1 a potential candidate for biomedical tissue reconstruction.

OBJECTIVE: Implementation of tissue adhesives from natural sources endowed with good mechanical properties and underwater resistance still represents a challenging research goal. Inspired by the extraordinary wet adhesion properties of mussel byssus proteins resulting from interaction of catechol and amino residues, hydrogels from soy protein isolate (SPI) and selected polyphenols i.e. caffeic acid (CA), chlorogenic acid (CGA) and gallic acid (GA) under mild aerial oxidative conditions were prepared.
METHODS: The hydrogels were subjected to chemical assays, ATR FT-IR and EPR spectroscopy, rheological and morphological SEM analysis. Mechanical tests were carried out on hydrogels prepared by inclusion of agarose. Biological tests included evaluation of the antibacterial and wound healing activity, and hemocompatibility.
RESULTS: The decrease of free NH2 and SH groups of SPI, the EPR features, the good cohesive strength and excellent underwater resistance (15 days for SPI/GA) under conditions relevant to their use as surgical glues indicated an efficient interaction of the polyphenols with the protein in the hydrogels. The polyphenols greatly also improved the mechanical properties of the SPI/ agarose/polyphenols hydrogels. These latter proved biocompatible, hemocompatible, not harmful to skin, displayed durable adhesiveness and good water-vapour permeability. Excellent antibacterial properties and in some cases (SPI/CGA) a favourable wound healing activity on dermal fibroblasts was obtained.