The degradation of concrete and reinforced concrete structures is a significant technical and economic challenge, requiring continuous repair and rehabilitation throughout their service life. Geopolymers (GPs), known for their high mechanical strength, low shrinkage, and durability, are being increasingly considered as alternatives to traditional repair materials. However, there is currently a lack of understanding regarding the interface bond properties between new geopolymer layers and old concrete substrates. In this paper, using advanced computational techniques, including quantum mechanical calculations and stochastic modeling, we explored the adsorption behavior and interaction mechanism of aluminosilicate oligomers with different Si/Al ratios forming the geopolymer gel structure and calcium silicate hydrate as the substrate at the interface bond region. We analyzed the electron density distributions of the highest occupied and lowest unoccupied molecular orbitals, examined the reactivity indices based on electron density functional theory, performed Mulliken charge population analysis, and evaluated global reactivity descriptors for the considered oligomers. The results elucidate the mechanisms of local and global reactivity of the oligomers, the equilibrium low-energy configurations of the oligomer structures adsorbed on the surface of C-(A)-S-H(I) (100), and their adsorption energies. These findings contribute to a better understanding of the adhesion properties of geopolymers and their potential as effective repair materials.

The hierarchic assembly of fibrillar collagen into an extensive and ordered supramolecular protein fibril is critical for extracellular matrix function and tissue mechanics. Despite decades of study, we still know very little about the complex process of fibrillogenesis, particularly at the earliest stages where observation of rapidly forming, nanoscale intermediates challenges the spatial and temporal resolution of most existing microscopy methods. Using video rate scanning atomic force microscopy (VRS-AFM), we can observe details of the first few minutes of collagen fibril formation and growth on a mica surface in solution. A defining feature of fibrillar collagens is a 67-nm periodic banding along the fibril driven by the organized assembly of individual monomers over multiple length scales. VRS-AFM videos show the concurrent growth and maturation of small fibrils from an initial uniform height to structures that display the canonical banding within seconds. Fibrils grow in a primarily unidirectional manner, with frayed ends of the growing tip latching onto adjacent fibrils. We find that, even at extremely early time points, remodeling of growing fibrils proceeds through bird-caging intermediates and propose that these dynamics may provide a pathway to mature hierarchic assembly. VRS-AFM provides a unique glimpse into the early emergence of banding and pathways for remodeling of the supramolecular assembly of collagen during the inception of fibrillogenesis.

BACKGROUND: Polymethylmethacrylate (PMMA) bone cement is used in orthopedics and dentistry to get primary fixation to bone but doesn\'t provide a mechanically and biologically stable bone interface. Therefore, there was a great demand to improve the properties of the PMMA bone cement to reduce its clinical usage limitations and enhance its success rate. Recent studies demonstrated that the addition of halloysite nanotubes (HNTs) to a polymeric-based material can improve its mechanical and thermal characteristics.
OBJECTIVE: The purpose of the study is to assess the compressive strength, flexural strength, maximum temperature, and setting time of traditional PMMA bone cements that have been manually blended with 7 wt% HNT fillers.
METHODS: PMMA powder and monomer liquid were combined to create the control group, the reinforced group was made by mixing the PMMA powder with 7 wt% HNT fillers before liquid mixing. Chemical characterization of the HNT fillers was employed by X-ray fluorescence (XRF). The morphological examination of the cements was done using a scanning electron microscope (SEM). Analytical measurements were made for the compressive strength, flexural strength, maximum temperature, and setting time. Utilizing independent sample t-tests, the data was statistically assessed to compare mean values (p < 0.05).
RESULTS: The findings demonstrated that the novel reinforced PMMA-based bone cement with 7 wt% HNT fillers showed higher mean compressive strength values (93 MPa) and higher flexural strength (72 MPa). and lower maximum temperature values (34.8 °C) than the conventional PMMA bone cement control group, which was (76 MPa), (51 MPa), and (40 °C), respectively (P < 0.05). While there was no significant difference in the setting time between the control and the modified groups.
CONCLUSIONS: The novel PMMA-based bone cement with the addition of 7 wt% HNTs can effectively be used in orthopedic and dental applications, as they have the potential to enhance the compressive and flexural strength and reduce the maximum temperatures.

Soil minerals influence the biogeochemical cycles of fluoride (F) and phosphorus (P), impacting soil quality and bioavailability to plants. However, the cooperative mechanisms of soil minerals in governing F and P in the soil environment remain a grand challenge. Here, we reveal the essential role of a typical soil mineral, montmorillonite (Mt), in the cycling and fate of F and P. The results show that the enrichment of metal sites on the Mt surface promotes the mineralization of F to the fluorapatite (FAP) phase, thereby remaining stable in the environment, simultaneously promoting P release. This differential behavior leads to a reduction in the level of F pollution and an enhancement of P availability. Moreover, solid-state NMR and HRTEM observations confirm the existence of metastable F-Ca-F intermediates, emphasizing the pivotal role of Mt surface sites in regulating crystallization pathways and crystal growth of FAP. Furthermore, the in situ atomic force microscopy and theoretical calculations reveal molecular fractionation mechanisms and adsorption processes. It is observed that a competitive relationship exists between F and P at the Mt interface, highlighting the thermodynamically advantageous pathway of forming metastable intermediates, thereby governing the activity of F and P in the soil environment at a molecular level. This work paves the way to reveal the important role of clay minerals as a mineralization matrix for soil quality management and offers new strategies for modulating F and P dynamics in soil ecosystems.

Phototransformation is a key process affecting the fate of many antibiotics in the environment, but little is known about whether their photoproducts exert selective pressure on bacteria by inducing antibiotic resistance genes (ARGs). Here, we examined the expression of tetracycline resistance gene tet(M) of a fluorescent Escherichia coli whole-cell bioreporter influenced by the phototransformation of tetracycline. The presence of suspended smectite clay (montmorillonite or hectorite, 1.75 g/L) or dissolved humic substance (Pahokee Peat humic acid or Pahokee peat fulvic acid, 10 mg C/L) in aqueous solutions markedly facilitated the transformation of tetracycline (initially at 400 μg/L) with half-life shortened by 1.4-2.6 times. Despite the similar phototransformation ratios (80-90%) of the total loaded tetracycline after 60 min irradiation, the decreased ratios of cell fluorescence intensity (which was proportional to the expression amount of ARG tet(M)) were much higher with the two clays (94 and 93%) than with the two humic substances (44 and 69%) when compared to the respective dark controls. As illustrated by mass spectroscopic and chemical analyses, tetracycline was proposed to be mainly transformed to amide (ineffective in inducing ARGs) with the presence of clays by reaction with self-photosensitized singlet oxygen (1O2), while the humic substances might catalyze the production of another two demethylated and/or deaminated compounds (still effective in inducing ARGs) in addition to the amide compound via reaction with triplet excited state dissolved organic matter (3DOM*). As clay minerals and humic substances are important soil constituents and ubiquitously present in surface environments, the observed clay and humic-dependent photooxidation pathways of tetracycline and the differing selective pressures of the associated products highlight the need for monitoring the transformation compounds of antibiotics and provide critical insight into the development of antibiotic treatment protocols.

The organic xerogel (OX) was synthesized through sol-gel polymerization of formaldehyde and resorcinol in inverse emulsion using Na2CO3 as a catalyst. Meanwhile, OX containing sepiolite (OX-Sep) and vermiculite (OX-Ver) were prepared similarly to OX but adding clays during synthesis. All materials were mesoporous and presented spherical morphology, and the surface of these materials exhibited an acidic character because the concentration of acidic sites was higher than those of basic sites. Cd(II) adsorption from aqueous solutions onto OX, OX-Sep, and OX-Ver was examined, and the OX-Sep showed the highest adsorption capacity towards Cd(II) of 189.7 mg/g, being 1.5, 2, and 36 times higher than that of OX-Ver, OX, and Sep. The OX-Sep capacity for adsorbing Cd(II) was significantly lessened by decreasing the pH from 7 to 4 and raising the ionic strength from 0.01 N to 0.1 N. This trend was ascribed to electrostatic attraction between the Cd+2 in water and the negatively charged surface of OX-Sep. Besides, desorption studies at pH 4 showed that the average desorption percentage of Cd(II) adsorbed on OX-Sep was 80%. The characterization results and the effect of the operating conditions on the adsorption capacity proved that electrostatic attraction and cation exchange play a crucial role in the adsorption mechanism.

Clay-algae flocculation is a promising method to remove harmful algal blooms (HABs) in aquatic ecosystems. Many HAB-generating species, such as Microcystis aeruginosa (M. aeruginosa), a common species in lakes, produce toxins and harm the environment, human health, and the economy. Natural clays, such as bentonite and kaolinite, and modification of these clays have been applied to mitigate HABs by forming large aggregates and settling down. In this study, we aim to examine the impact of laponite, a commercially available smectite clay that is synthetic, transparent, compatible with human tissues, and degradable, on removing HABs. We compare the cell removal efficiencies (RE) of laponite, two natural clays, and their polyaluminum chloride (PAC)-modified versions through clay-algae flocculation experiments. Our results show that the optimum concentrations of laponite, bentonite, kaolinite, PAC-modified bentonite, and PAC-modified kaolinite to remove 80 % of the M. aeruginosa cells from the water column are 0.05 g/L, 2 g/L, 4 g/L, 2 g/L and 0.3 g/L respectively. Therefore, to achieve the same cell removal efficiency, the amount of laponite needed is 40 to 80 times less than bentonite and kaolinite, and 6 times less than PAC-modified kaolinite. We demonstrate that the superior performance of laponite clay is because of its smaller particle size, which increases the encounter rate between cells and clay particles. Furthermore, experiments using water samples from Powderhorn Lake confirmed laponite\'s effectiveness in mitigating HABs. Our price analysis also suggests that this commercially-available clay, laponite, can be used in the field at a relatively low cost.

Montmorillonite (MM) crystal nanoplates acquire anticancer properties when coated with the mitochondrial protein cytochrome c (cytC) due to the cancer cells\' capability to phagocytize cytC-MM colloid particles. The introduced exogenous cytC initiates apoptosis: an irreversible cascade of biochemical reactions leading to cell death. In the present research, we investigate the organization of the cytC layer on the MM surface by employing physicochemical and computer methods-microelectrophoresis, static, and electric light scattering-to study cytC adsorption on the MM surface, and protein electrostatics and docking to calculate the local electric potential and Gibbs free energy of interacting protein globules. The found protein concentration dependence of the adsorbed cytC quantity is nonlinear, manifesting a positive cooperative effect that emerges when the adsorbed cytC globules occupy more than one-third of the MM surface. Computer analysis reveals that the cooperative effect is caused by the formation of protein associates in which the cytC globules are oriented with oppositely charged surfaces. The formation of dimers and trimers is accompanied by a strong reduction in the electrostatic component of the Gibbs free energy of protein association, while the van der Waals component plays a secondary role.

The role of carboxylic, aldehyde, or epoxide groups incorporated into bottlebrush macromolecules as anchoring blocks (or cartilage-binding blocks) is investigated by measuring their lubricating properties and cartilage-binding effectiveness. Mica modified with amine groups is used to mimic the cartilage surface, while bottlebrush polymers functionalized with carboxylic, aldehyde, or epoxide groups played the role of the lubricant interacting with the cartilage surface. We demonstrate that bottlebrushes with anchoring blocks effectively reduce the friction coefficient on modified surfaces by 75-95% compared to unmodified mica. The most efficient polymer appears to be the one with epoxide groups, which can react spontaneously with amines at room temperature. In this case, the value of the friction coefficient is the lowest and equals 0.009 ± 0.001, representing a 95% reduction compared to measurements on nonmodified mica. These results show that the presence of the functional groups within the anchoring blocks has a significant influence on interactions between the bottlebrush polymer and cartilage surface. All synthesized bottlebrush polymers are also used in the preliminary lubrication tests carried out on animal cartilage surfaces. The developed materials are very promising for future in vivo studies to be used in osteoarthritis treatment.

Mars has been exposed to ionizing radiation for several billion years, and as part of the search for life on the Red Planet, it is crucial to understand the impact of radiation on biosignature preservation. Several NASA and ESA missions are looking for evidence of ancient life in samples collected at depths shallow enough that they have been impacted by galactic cosmic rays (GCRs). In this study, we exposed a diverse set of Mars analog samples to 0.9 Megagray (MGy) of gamma radiation to mimic 15 million years of exposure on the Martian surface. We measured no significant impact of GCRs on the total organic carbon (TOC) and bulk stable C isotopes in samples with initial TOC concentration > 0.1 wt. %; however, diagnostic molecular biosignatures presented a wide range of degradation that didn\'t correlate to factors like mineralogy, TOC, water content, and surface area. Exposure dating suggests that the surface of Gale crater has been irradiated at more than five times our dose, yet using this relatively low dose and \"best-case scenario\" geologically recalcitrant biomarkers, large and variable losses were nevertheless evident. Our results empasize the importance of selecting sampling sites at depth or recently exposed at the Martian surface.