Air pollution is an example of a complex environmental mixture with different biological activities, making risk assessment challenging. Current cancer risk assessment strategies that focus on individual pollutants may overlook interactions among them, potentially underestimating health risks. Therefore, a shift towards the evaluation of whole mixtures is essential for accurate risk assessment. This study presents the application of an in vitro New Approach Methodology (NAM) to estimate relative cancer potency factors of whole mixtures, with a focus on organic pollutants associated with air particulate matter (PM). Using concentration-dependent activation of the DNA damage-signaling protein checkpoint kinase 1 (pChk1) as a readout, we compared two modeling approaches, the Hill equation and the benchmark dose (BMD) method, to derive Mixture Potency Factors (MPFs). MPFs were determined for five PM2.5 samples covering sites with different land uses and our historical pChk1 data for PM10 samples and Standard Reference Materials. Our results showed a concentration-dependent increase in pChk1 by all samples and a higher potency compared to the reference compound benzo[a]pyrene. The MPFs derived from the Hill equation ranged from 128 to 9793, while those from BMD modeling ranged from 70 to 303. Despite the differences in magnitude, a consistency in the relative order of potencies was observed. Notably, PM2.5 samples from sites strongly impacted by biomass burning had the highest MPFs. Although discrepancies were observed between the two modeling approaches for whole mixture samples, relative potency factors for individual PAHs were more consistent. We conclude that differences in the shape of the concentration-response curves and how MPFs are derived explain the observed differences in model agreement for complex mixtures and individual PAHs. This research contributes to the advancement of predictive toxicology and highlights the feasibility of transitioning from assessing individual agents to whole mixture assessment for accurate cancer risk assessment and public health protection.

The domestic combustion of locally sourced smoky (bituminous) coal in Xuanwei and Fuyuan counties, China, is responsible for some of the highest lung cancer rates in the world. Recent research has pointed to methylated PAHs (mPAHs), particularly 5-methylchrysene (5MC), within coal combustion products as a driving factor. Here we describe measurements of mPAHs in Xuanwei and Fuyuan derived from controlled burnings (i.e., water boiling tests, WBT, n = 27) representing exposures during stove use, and an exposure assessment (EA) study (n=116) representing 24 h weighted exposures. Using smoky coal leads to significantly higher concentrations of known and likely human carcinogens than using smokeless coal, including 5MC (3.7 ng/m3 vs. 1.0 ng/m3 for EA samples and 100.8 ng/m3 vs. 2.2 ng/m3 for WBT samples), benzo[a]pyrene (38.0 ng/m3 vs. 7.9 ng/m3 for EA samples and 455.3 ng/m3 vs. 12.0 ng/m3 for WBT samples), and 7,12-dimethylbenz[a]anthracene (1.9 ng/m3 vs. 0.2 ng/m3 for EA samples and 47.7 ng/m3 vs. 0.6 ng/m3 for WBT samples). Mixed effect models for both EA samples and WBT samples revealed clear variation in mPAHs concentrations depending on smoky coal source while stove ventilation was consistently found to reduce measured concentrations (by up to nine fold and 65 fold for EA and WBT samples respectively when using smoky coal). Fuel type had a larger influence on mPAHs concentrations than stove type. These findings indicate that users of smoky coal experience exposure to many PAHs, including known and suspected human carcinogens (especially during cooking activities), many of which are not routinely tested for. Collectively, this provides insights into the potential etiologies of lung cancer in the region and further highlights the importance of clean fuel transitions and stove refinements as the final goal for reducing household air pollution and its associated health risks.

The risk of chronic inflammatory diseases has been linked to exposure to polycyclic aromatic hydrocarbons (PAHs). However, limited data are available regarding their impact on periodontitis. This study aims to explore the association between PAHs and periodontitis while also evaluating the potential modifying effects of healthy lifestyles. We included 17,031 participants from the US National Health and Nutrition Examination Survey (NHANES, 2001-2004 and 2009-2014). A meta-analysis-based environment-wide association study (EWAS) was adopted to identify environmental chemicals for the mean probing pocket depth (PPD) and the mean attachment loss (AL). PAHs were further evaluated concerning the cross-sectional association with Mod/Sev periodontitis using multivariable logistic regression models. Moreover, healthy lifestyle scores were estimated to assess their modifying effect on the PAH-periodontitis association. EWAS analysis identified several urinary PAH metabolites as significant risk factors for the mean PPD and AL (false discovery rate < 0.05, Q > 0.05). Periodontitis severity was positively associated with eight individual and total PAH concentrations. Stratifying the participants in terms of healthy lifestyle scores did not reveal any association in the healthy group. Moreover, the association weakened in never-smokers and individuals with sufficient physical activity and normal weight. PAH exposure was a risk factor for periodontitis. A healthier lifestyle was observed to offset the risk potentials of PAHs for periodontitis. Smoking cessation, physical activity, and weight loss might be recommended as a healthy lifestyle strategy for ameliorating PAH-related periodontitis.

Many studies have indicated that individual exposure to phthalates (PAEs) or polycyclic aromatic hydrocarbons (PAHs) affects pregnancy outcomes. However, combined exposure to PAEs and PAHs presents a more realistic situation, and research on the combined effects of PAEs and PAHs on gestational age and newborn size is still limited. This study aimed to assess the effects of combined exposure to PAEs and PAHs on neonatal gestational age and birth size. Levels of 9 PAE and 10 PAH metabolites were measured from the urine samples of 1030 women during early pregnancy from the Zunyi Birth Cohort in China. Various statistical models, including linear regression, restricted cubic spline, Bayesian kernel machine regression, and quantile g-computation, were used to study the individual effects, dose-response relationships, and combined effects, respectively. The results of this prospective study revealed that each ten-fold increase in the concentration of monoethyl phthalate (MEP), 2-hydroxynaphthalene (2-OHNap), 2-hydroxyphenanthrene (2-OHPhe), and 1-hydroxypyrene (1-OHPyr) decreased gestational age by 1.033 days (95 % CI: -1.748, -0.319), 0.647 days (95 % CI: -1.076, -0.219), 0.845 days (95 % CI: -1.430, -0.260), and 0.888 days (95 % CI: -1.398, -0.378), respectively. Moreover, when the concentrations of MEP, 2-OHNap, 2-OHPhe, and 1-OHPyr exceeded 0.528, 0.039, 0.012, and 0.002 µg/g Cr, respectively, gestational age decreased in a dose-response manner. Upon analyzing the selected PAE and PAH metabolites as a mixture, we found that they were significantly negatively associated with gestational age, birth weight, and the ponderal index, with 1-OHPyr being the most important contributor. These findings highlight the adverse effects of single and combined exposure to PAEs and PAHs on gestational age. Therefore, future longitudinal cohort studies with larger sample sizes should be conducted across different geographic regions and ethnic groups to confirm the impact of combined exposure to PAEs and PAHs on birth outcomes.

The levels of acrylamide (AA), four polycyclic aromatic hydrocarbons (PAH4), and heterocyclic aromatic amines (HAAs) in 184 air-fried agricultural, fishery, and animal products were measured using GC-MS and UPLC-MS/MS. Among the tested samples, sea algae exhibited the highest levels of PAH4 and eight specific HAAs (HAA8), while root and tuber crops had the greatest amount of AA. Agricultural and fisheries products had higher levels of all three contaminants, while livestock products had an inverse correlation between PAH4 and HAA8. The margin of exposure in the Korean population is considered \"unlikely a concern\" for all samples for PAH4 and HAA8, however, that for AA in cereal, vegetable, and root and tuber crops is deemed \"may be a concern\", with a value < 10,000 in all age groups. These findings suggest a need to evaluate dietary AA exposure in certain food categories and further research to minimize AA formation during air frying.
UNASSIGNED:
UNASSIGNED: The online version contains supplementary material available at 10.1007/s10068-024-01639-4.

BACKGROUND: Polycyclic aromatic hydrocarbons (PAHs) have been linked to adverse birth outcomes that have been reported to be induced by oxidative stress, but few epidemiological studies to date have evaluated associations between urinary PAH metabolites and oxidative stress biomarkers in pregnancy and identified critical periods for these outcomes and PAH exposures in pregnancy.
METHODS: A cohort of pregnant women was recruited early in pregnancy from antenatal clinics at the University of California Los Angeles during 2016-2019. We collected urine samples up to three times during pregnancy in a total of 159 women enrolled in the cohort. A total of 7 PAH metabolites and 2 oxidative stress biomarkers [malondialdehyde (MDA), 8-hydroxy-2\'-deoxyguanosine (8-OHdG)] were measured in all available urine samples. Using multiple linear regression models, we estimated the percentage change (%) and 95% confidence interval (CI) in 8-OHdG and MDA measured at each sample collection time per doubling of PAH metabolite concentrations. Furthermore, we used linear mixed models with a random intercept for participant to estimate the associations between PAH metabolite and oxidative stress biomarker concentrations across multiple time points in pregnancy.
RESULTS: Most PAH metabolites were positively associated with both urinary oxidative stress biomarkers, MDA and 8-OHdG, with stronger associations in early and late pregnancy. A doubling of each urinary PAH metabolite concentration increased MDA concentrations by 5.8-41.1% and 8-OHdG concentrations by 13.8-49.7%. Linear mixed model results were consistent with those from linear regression models for each gestational sampling period.
CONCLUSIONS: Urinary PAH metabolites are associated with increases in oxidative stress biomarkers during pregnancy, especially in early and late pregnancy.

Hole-transporting materials (HTMs) are essential for optoelectronic devices, such as organic light-emitting diodes (OLEDs), dye-sensitized solar cells, and perovskite solar cells. Triarylamines have been employed as HTMs since they were introduced in 1987. However, heteroatoms or side chains embedded in the core skeleton of triarylamines can cause thermal and chemical stability problems. Herein, we report that hexabenzo[a,c,fg,j,l,op]tetracene (HBT), a small nonplanar nanographene, functions as a hydrocarbon HTM with hole transport properties that match those of triarylamine-based HTMs. X-ray structural analysis and theoretical calculations revealed effective multidirectional orbital interactions and transfer integrals for HBT. In-depth experimental and theoretical analyses revealed that the nonplanarity-inducing annulative π-extension can achieve not only a stable amorphous state in bulk films, but also a higher increase in the highest occupied molecular orbital level than conventional linear or cyclic π-extension. Furthermore, an in-house manufactured HBT-based OLED exhibited excellent performance, featuring superior curves for current density-voltage, external quantum efficiency-luminance, and lifetime compared to those of representative triarylamine-based OLEDs. A notable improvement in device lifetime was observed for the HBT-based OLED, highlighting the advantages of the hydrocarbon HTM. This study demonstrates the immense potential of small nonplanar nanographenes for optoelectronic device applications.

With rising consumer awareness of health and wellness, the demand for enhanced food safety is rapidly increasing. The generation of chemical contaminants during the thermal processing of food materials, including polycyclic aromatic hydrocarbons, heterocyclic aromatic amines, and acrylamide happens every day in every kitchen all around the world. Unlike extraneous chemical contaminants (e.g., pesticides, herbicides, and chemical fertilizers), these endogenic chemical contaminants occur during the cooking process and cannot be removed before consumption. Therefore, much effort has been invested in searching for ways to reduce such thermally induced chemical contaminants. Recently, the addition of bioactive compounds has been found to be effective and promising. However, no systematic review of this practical science has been made yet. This review aims to summarize the latest applications of bioactive compounds for the control of chemical contaminants during food thermal processing. The underlying generation mechanisms and the toxic effects of these chemical contaminants are discussed in depth to reveal how and why they are suppressed by the addition of certain bioactive ingredients. Examples of specific bioactive compounds, such as phenolic compounds and organic acids, as well as their application scenarios, are outlined. In the end, outlooks and expectations for future development are provided based on a comprehensive summary and reflection of references.

BACKGROUND: Polycyclic aromatic hydrocarbons (PAHs) and metals were associated with decreased lung function, but co-exposure effects and underlying mechanism remained unknown.
METHODS: Among 1,123 adults from National Health and Nutrition Examination Survey 2011-2012, 10 urinary PAHs, 11 urinary metals, and peripheral white blood cell (WBC) count were determined, and 5 lung function indices were measured. Least absolute shrinkage and selection operator, Bayesian kernel machine regression, and quantile-based g-computation were used to estimate co-exposure effects on lung function. Mediation analysis was used to explore mediating role of WBC.
RESULTS: These models demonstrated that PAHs and metals were significantly associated with lung function impairment. Bayesian kernel machine regression models showed that comparing to all chemicals fixed at median level, forced expiratory volume in 1 s (FEV1)/forced vital capacity, peak expiratory flow, and forced expiratory flow between 25 and 75% decreased by 1.31% (95% CI: 0.72%, 1.91%), 231.62 (43.45, 419.78) mL/s, and 131.64 (37.54, 225.74) mL/s respectively, when all chemicals were at 75th percentile. In the quantile-based g-computation, each quartile increase in mixture was associated with 104.35 (95% CI: 40.67, 168.02) mL, 1.16% (2.11%, 22.40%), 294.90 (78.37, 511.43) mL/s, 168.44 (41.66, 295.22) mL/s decrease in the FEV1, FEV1/forced vital capacity, peak expiratory flow, and forced expiratory flow between 25% and 75%, respectively. 2-Hydroxyphenanthrene, 3-Hydroxyfluorene, and cadmium were leading contributors to the above associations. WBC mediated 8.22%-23.90% of association between PAHs and lung function.
CONCLUSIONS: Co-exposure of PAHs and metals impairs lung function, and WBC could partially mediate this relationship. Our findings elucidate co-exposure effects of environmental mixtures on respiratory health and underlying mechanisms, suggesting that focusing on highly prioritized toxicants would effectively attenuate adverse effects.

Polycyclic aromatic hydrocarbons (PAHs) and metal elements are commonly considered hazardous air pollutants due to their toxic, mutagenic, and carcinogenic properties. However, few studies have simultaneously examined their potential sources and health effects. This study aimed to quantify the PAHs and metal elements in atmospheric PM2.5, investigating their characteristics and potential sources to assess associated health risks in the northern metropolitan area of Taiwan. The measurements indicated that the mean concentrations of total PAHs and metal elements in PM2.5 were 0.97±0.52 ng m-3 and 590±200 ng m-3, respectively. Utilizing the positive matrix factorization profiles, the PAH pollution was classified into two sources: industrial emissions, traffic emissions, and coal combustion (69%) were the predominant sources of PAHs, with petroleum volatilization and biomass burning (31%) making a lesser contribution. Similarly, we traced metal elements to three potential sources: natural sources (48%), a combined source of industrial emissions, coal combustion, and traffic exhaust (32%), and a blend of non-exhaust emissions from traffic and waste incineration sources (20%). Results from the potential source contribution function model suggested that the emissions of PAHs and metals could be influenced by the eastern regions of China, although local sources, including waste incinerators, traffic, shipping, and harbor activities, were identified as the primary contributors. Source-attributed excess cancer risk revealed that industry, traffic, and coal combustion had the highest cancer risk posed by PAHs in the cold period (1.0×10-5), while the greatest cancer risk among metal elements was linked to non-exhaust emissions from traffic and waste incineration emissions (2.0×10-5). This research underscores the importance of considering source contributions to health risk and emission reduction when addressing PM2.5 pollution. These findings have direct implications for policymakers, providing them with valuable insights to develop strategies that protect public health from the detrimental effects of PAH and metal element exposure.