In this study, the active food packaging film were prepared using hydroxypropyltrimethyl ammonium chloride chitosan with different substitution sites (O-HACC & N-HACC) and dialdehyde chitosan (DCS) grafted with protocatechuic acid (PA). To explore the effect of chitosan quaternization positions and crosslinking approaches on the slow-release and antibacterial properties, the double-crosslinked film were fabricated through the self-coupling reaction of PA and Schiff base reaction between amino groups on HACC and aldehyde groups on DCS. The HACC/DCS-based film exhibited stable porous three-dimensional networks with high nisin loading ratios (>90 %). With the participation of the catechol-catechol structure, the dense double-crosslinked film effectively restricted the diffusion of the water molecules, resulting in excellent slow-release properties fitting with the Korsmeyer-Peppas kinetic model. Especially, O-HACC/PA-g-DCS film, which had more reaction sites for Schiff base crosslinking than N-HACC, exhibited the equilibrium swelling ratio of 800 % at 60 h and could sustainably release nisin via non-Fickian diffusion behavior until 48 h. Moreover, the HACC/DCS-based double-crosslinked film performed good long-time antibacterial activity and preservation effects on salmon. On the 10th day of storage, the TVBN of N-HACC/PA-g-DCS and O-HACC/PA-g-DCS groups were only 28.26 ± 1.93 and 29.06 ± 1.68 mg/100 g and still lower than the thresholds.

The presence of oxygen can degrade food quality, making it essential to remove oxygen from the packaging headspace of food products. In this study, the effect of catalyst type and concentration on iron-based oxygen-scavenging films was investigated to enhance the oxygen removal efficiency in food packaging films. Among the investigated catalysts, calcium chloride and lipophilic silica improved the oxygen-scavenging capacity more than sodium chloride and hydrophilic silica. As the catalyst content was increased from 0.1 to 6.0 %(w/w), the oxygen content (%) in the package decreased from 3.90 to 0.36%. Application of oxygen-scavenging films in apple packaging decreased the apple browning index from 52.87 to 38.13 and reduced the oxygen concentration inside the package from 9.8 to 0.0%. Therefore, the food packaging film developed in this study can be used as a food packaging material that removes oxygen and thus prevents food quality deterioration.
UNASSIGNED: The online version contains supplementary material available at 10.1007/s10068-024-01520-4.

This work utilizes a handheld electrospinning device to prepare a novel nanofibrous composite membrane in situ for packaging freshness. It can realize pick-and-pack and is easy to operate. The nanofibrous membrane is based on PVB as the matrix material, adding Camellia oil (CO) and ZnO-TiO2 composite nanoparticles (ZT) as the active material. The antimicrobial property of the CO and the photocatalytic activity of the nanoparticles give the material good antimicrobial and ethylene degradation functions. Meanwhile, this nanofibrous membrane has good mechanical properties, suitable moisture permeability and good optical properties. The nanofibrous membrane are suitable for both climacteric and non- climacteric fruits. Its use as a cling film extends the shelf life of strawberries by 4 days and significantly slows the ripening of small tomatoes. Therefore, this nanofibrous membrane has great potential for application in the field of fruit preservation.

This research was undertaken to assess the effect of tragacanth gum-chitin nanofiber (TG-CNF) film containing free (CEO) or encapsulated cumin essential oil (CNE) combined with oxygen absorber (OA) packaging on the shelf-life of ready-to-cook (RTC) turkey breast burgers during chilled storage. The experimental groups were OA and TG-CNF as single treatments, TG-CNF + CEO, TG-CNF + CNE, and TG-CNF + OA as binary treatments, TG-CNF + CEO + OA and TG-CNF + CNE + OA as ternary treatments, and control. The samples were stored at 3°C for 20 days and analyzed for microbial, physicochemical, and sensory attributes. Binary treatments, when compared to single treatments, and ternary treatments, when compared to binary treatments, exhibited enhanced effectiveness in managing microbial growth, hindering physicochemical alterations, and decelerating sensory alterations. At day 20, TG-CNF + CNE + OA group was identified as the most effective group in inhibiting the growth of total mesophilic bacteria (TMB), total psychrophilic bacteria (TSB), and coliforms (final counts were 4.8, 4.16, and ≤1 log CFU/g, respectively), and TG-CNF + CNE + OA and TG-CNF + CEO + OA groups were known as the most effective groups in inhibiting lactic acid bacteria (LAB) (final counts were 4.71 and 5.15 log CFU/g, respectively). Furthermore, the TG-CNF + CNE + OA treatment proved to be the most effective group in reducing the total volatile nitrogen (TVN) (final level was 19.2 mg N/100 g) and thiobarbituric acid reactive substances (TBARS) (final level was 0.119 mg malondialdehyde (MDA)/kg). TG-CNF + CNE + OA and TG-CNF + CEO + OA were the most efficient groups to delay the increasing rate of cooking loss (final values were 23.3% and 24.6%) and pH (final values were 7.01 and 6.99). The sample\'s shelf-life was 4 days in control and TG-CNF, 8 days in OA and TG-CNF + OA, 12 days in TG-CNF + CEO, 16 days in TG-CNF + CNE and TG-CNF + CEO + OA, and at least 20 days in TG-CNF + CNE + OA. As a result, the incorporation of TG-CNF + CNE alongside OA packaging emerges as a highly effective active packaging method for preserving RTC turkey breast burgers during chilled storage.

Protein and polysaccharides are the mostly used biopolymers for developing packaging film and their combination-based composite produced better quality film compared to their single counterpart. The combination of protein and polysaccharides are superior owing to the better physical properties like water resistance, mechanical and barrier properties of the film. The protein/polysaccharide-based composite film showed promising result in active and smart food packaging regime. This work discussed the recent advances on the different types of protein/polysaccharide combinations used for making bio-based sustainable packaging film formulation and further utilized in food packaging applications. The fabrication and properties of various protein/polysaccharide combination are comprehensively discussed. This review also presents the use of the multifunctional composite film in meat, fish, fruits, vegetables, milk products, and bakery products, etc. Developing composite is a promising approach to improve physical properties and practical applicability of packaging film. The low water resistance properties, mechanical performance, and barrier properties limit the real-time use of biopolymer-based packaging film. The combination of protein/polysaccharide can be one of the promising solutions to the biopolymer-based packaging and thus recently many works has been published which is suitable to preserve the shelf life of food as well trace the food spoilage during food storage.

Active packaging is of great interest in the modern food industry due to increasing shelf life and enhancing food quality. The importance of this technology increases when natural polymers are used in the construction of active packages. Development of a natural, biodegradable, and dual-active film was aimed in this study. So, agar aerogel containing different amounts of chlorine-doped graphene quantum dots (Cl-GQDs) was prepared. Cl-GQDs had excitation-dependent fluorimetry behavior due to the zigzag edges of graphene. The mean diameter of spherical nanoparticles of Cl-GQDs was about 12 nm, according to HR-TEM images. The results of Raman and ATR-FTIR confirmed that chlorine was well-doped on the GQD structure. Cl-GQDs showed high UV-absorption capability and very strong antioxidant activity (94.31 %), which maintained these activities after incorporation into the agar aerogel. The doped chlorine was responsible for the capacity to charge transfer of GQDs. BET and SEM results showed that adding Cl-GQDs to agar caused a porous structure. Finally, different types of agar aerogels containing Cl-GQDs can be used considering the intended application of aerogel. Agar aerogel containing 20 % Cl-GQDs is suggested if a porous aerogel with good thermal insulation properties is considered. However, agar aerogel containing 1 % Cl-GQDs is suitable as an active film. In conclusion, while Cl-GQDs hold promise as sustainable and multifunctional food packaging materials, their potential toxic effects must be thoroughly evaluated. Future studies should explore migration, potential interactions with specific food matrices, and long-term safety to ensure consumer protection.

In this work, the modification of poly(butylene adipate-co-terephthalate) (PBAT) was combined with the development of active packaging films. PBAT, starch, plasticizer, and tea polyphenols (TP) were compounded and extrusion-blown into thermoplastic starch (TPS)/PBAT-TP active films. Effects of TPS contents on physicochemical properties, functional activities, biodegradability, and release kinetics of PBAT-based active films were explored. Starch interacted strongly with TP through hydrogen bonding and induced the formation of heterogeneous structures in the films. With the increase in TPS contents, surface hydrophilicity and water vapor permeability of the films increased, while mechanical properties decreased. Blending starch with PBAT greatly accelerated degradation behavior of the films, and the T30P70-TP film achieved complete degradation after 180 days. As TPS contents increased, swelling degree of the films increased and TP release were improved accordingly, resulting in significantly enhanced antioxidant and antimicrobial activities. This work demonstrated that filling starch into PBAT-based active films could achieve different antioxidant and antimicrobial activities of the films by regulating film swelling and release behavior.

Food packaging plays an important role in protecting the safety and quality of food products and enables communication with consumers. With the improved consumers\' awareness of safety and quality of food products, the changes in consumers\' lifestyle, and the growing demand for transparency of food products along the supply chain, food packaging technologies have evolved from only providing the four fundamental functions (i.e., protection and preservation, containment, communication and marketing, and convenience) to possessing additional functions including active modification of the inside microenvironment (i.e., active packaging) and monitoring the safety and quality of products in real-time (i.e., intelligent packaging). A variety of active and intelligent packaging systems have been developed to better protect and monitor the quality and safety of food products during the past several decades. Recently, advanced versions of smart packaging technologies, such as smart active packaging and smart intelligent packaging technologies have also been developed to enhance the effectiveness of conventional smart packaging systems. Additionally, smart packaging systems that harvest the advantages of both active packaging and intelligent packaging have also been developed. In this chapter, a brief overview of smart packaging technologies was provided. Specific technologies being covered include conventional smart packaging technologies and advanced smart packaging technologies, such as smart active packaging, smart intelligent packaging and dual-function smart packaging.

Strawberries spoil rapidly after harvest due to factors such as the ripening process, weight loss, and, most importantly, microbial contamination. Traditionally, several methods are used to preserve strawberries after harvest and extend their shelf life, including thermal, plasma, radiation, chemical, and biological treatments. Although these methods are effective, they are a concern from the perspective of safety and consumer acceptance of the treated food. To address these issues, more advanced environment-friendly technologies have been developed over the past decades, including modified and controlled atmosphere packaging, active biopolymer-based packaging, or edible coating formulations. This method can not only significantly extend the shelf life of fruit but also solve safety concerns. Some studies have shown that combining two or more of these technologies can significantly extend the shelf life of strawberries, which could significantly contribute to expanding the global supply chain for delicious fruit. Despite the large number of studies underway in this field of research, no systematic review has been published discussing these advances. This review aims to cover important information about postharvest physiology, decay factors, and preservation methods of strawberry fruits. It is a pioneering work that integrates, relates, and discusses all information on the postharvest fate and handling of strawberries in one place. Additionally, commercially used techniques were discussed to provide insight into current developments in strawberry preservation and suggest future research directions in this field of study. This review aims to enrich the knowledge of academic and industrial researchers, scientists, and students on trends and developments in postharvest preservation and packaging of strawberry fruits.

The global trend towards conscious consumption plays an important role in consumer preferences regarding both the composition and quality of food and packaging materials, including sustainable ones. The development of biodegradable active packaging materials could reduce both the negative impact on the environment due to a decrease in the use of oil-based plastics and the amount of synthetic preservatives. This review discusses relevant functional additives for improving the bioactivity of biopolymer-based films. Addition of plant, microbial, animal and organic nanoparticles into bio-based films is discussed. Changes in mechanical, transparency, water and oxygen barrier properties are reviewed. Since microbial and oxidative deterioration are the main causes of food spoilage, antimicrobial and antioxidant properties of natural additives are discussed, including perspective ones for the development of biodegradable active packaging.