The aim of this study was to produce Bologna sausages rich in unsaturated fatty acids and to evaluate this replacement on the structural characteristics. For the purpose of a comparative analysis, three different types of sausages were produced, distinct only in the type of fat used: I. sausages obtained with pork backfat (PBF), II. sausages produced with oleogel formed from refined sunflower oil and glycerol monostearate (GM_OG), and III. with candelilla wax oleogel (CW_OG). The meat composition was also analyzed to better understand the process in the dynamics and the finished products were analyzed both uncooked and cooked. The enhanced oil-binding capacity of oleogels suggests their potential value as substitutes for saturated fats (>99%). In terms of meat composition textural analysis, the highest hardness value was registered for PBF_C of 25.23 N, followed by a CW_OG_C of 13.08 N and a GM_OG_C of 12.27 N. However, adhesiveness, cohesiveness, springiness index, and gumminess showed similar values between samples. Reformulation of products with oleogels as a fat source abundant in mono- and polyunsaturated fatty acids resulted in uncooked products exhibiting reduced hardness values of 49.01 N (CW_OG_US) and 40.51 N (GM_OG_US), compared to 65.03 N (PBF_US). Color results of the cross-section color can indicate the potential for consumer acceptance due to the reduced color differences between the conventional and oleogel samples.

In contrast to rapeseed oil, pumpkin seed oil has yet to be well investigated in terms of oleogelation, and, to the best of our knowledge, no study related to the use of ethylcellulose (EC) in the structuring of this oil has been identified in the current scientific literature. Therefore, the present study evaluated several oleogels formulated with EC as the oleogelator in different concentrations of 7% (OG7) and 9% (OG9), based on cold-pressed pumpkin seed oil (PO) and refined rapeseed oil (RO), as well as on mixtures of the two oils in different combinations: PO:RO (3:1) (PRO) and PO:RO (1:1) (RPO). Physicochemical properties such as visual appearance, gel formation time (GFT), oil-binding capacity (OBC), oxidative and thermal stability, and textural characteristics were analyzed. Analysis of variance (ANOVA) and Tukey\'s honestly significant difference (HSD) were used in the statistical analysis of the data, with a significance level of p < 0.05. EC proved to be an effective structuring agent of the mentioned edible oils; the type of oils and the concentration of oleogelator significantly influenced the characteristics of the obtained oleogels. The 9% EC oleogels exhibited a more rigid structure, with a higher OBC and a reduced GFT. Pumpkin seed oil led to more stable oleogels, while the mixture of pumpkin seed oil with rapeseed oil caused a significant reduction in their mechanical properties and decreased the OBC. After 14 days of storage, all oleogels demonstrated proper oxidative stability within the bounds set by international regulations for edible fats, regardless of the kind of oil and EC concentration. All of the oleogels showed a higher oxidative stability than the oils utilized in their formulation; however, those prepared with cold-pressed pumpkin seed oil indicated a lower level of lipid oxidation among all oleogels. The P-OG9 and PR-OG9 oleogels, which mainly included PO and contained 9% EC, demonstrated the optimum levels of quality in texture, GFT, OBC, and oxidative stability.

Oleogels, characterized by their semisolid matrix formed from liquid oil structured by gelators, are emerging as a pivotal innovation in food formulation, primarily due to their capacity to enhance the nutritional profile of products by incorporating healthier fats. This review explored the integration of oleogels into diverse food matrices, examining their impact on texture, mouthfeel, and overall sensory characteristics. Through an extensive analysis of current research, this paper illustrates the versatility of oleogels created with a variety of structuring agents across different food applications. It also addresses the challenges inherent in the use of oleogels, including the preservation of their stability and consistency through varying storage and processing conditions, navigating the regulatory landscape concerning oleogelator safety and acceptability, and confronting higher production costs. Overall, this comprehensive review highlights the potential of oleogels as a promising tool for achieving desirable textural and sensory attributes in food products while also identifying areas for future research and development.

The objective of this work was to completely replace margarine with peanut diacylglycerol oil/ethyl cellulose-glycerol monostearate oleogel (DEC/GMS) oleogel, and evaluate its effect on starch digestibility of cakes. The in vitro digestibility analysis demonstrated that the DEC/GMS-6 cake exhibited a 26.36% increase in slowly digestible starch (SDS) and resistant starch (RS) contents, compared to cakes formulated with margarine. The increased SDS and RS contents might mainly be due to the hydrophobic nature of OSA-wheat flour, which could promote the formation of lipid-amylose complexes with GMS and peanut diacylglycerol oil. XRD pattern suggested that the presence of GMS in DEC-based oleogels facilitated the formation of lipid-amylose complexes. The DSC analysis revealed that the addition of GMS resulted in a significant increase in gelatinization enthalpy, rising from 249.7 to 551.9 J/g, which indicates an improved resistance to gelatinization. The FTIR spectra indicated that the combination of GMS could enhance the hydrogen bonding forces and short-range ordered structure in DEC-based cakes. The rheological analysis revealed that an increase in GMS concentration resulted in enhanced viscoelasticity of DEC-based cake compared to TEC-based cakes. The DEC-based cakes exhibited a more satisfactory texture profile and higher overall acceptability than those of TEC-based cakes. Overall, these findings demonstrated that the utilization of DEC-based oleogel presented a viable alternative to commercial margarine in the development of cakes with reduced starch digestibility.

With the aim to produce solid fats with a high percentage of unsaturated fatty acids, oleogels based on olive and peanut oil with different concentrations of beeswax (BW) and glycerol monostearate (GMS) as oleogelators were studied and compared. The critical oleogelator concentration for both BW and GMS was 3%. Thermal properties of the developed GMS-based oleogels pointed to a polymorphic structure, confirmed by the presence of two exothermic and endothermic peaks. All developed oleogels released less than 4% of oil, highlighting their high oil binding capacity. A morphology evaluation of oleogels showed platelet-like crystals, characterized by a cross-sectional length of 50 μm in BW-based oleogels and irregular clusters of needle-like crystals with a higher diameter in GMS-based oleogels. BW-based oleogels showed a solid fat content ranging from 1.16% to 2.27%, and no solid fat content was found at 37 °C. GMS-based oleogels reached slightly higher values of SFC that ranged from 1.58% to 2.97% at 25 °C and from 1.00% to 1.75% at 37 °C. Olive oil-based oleogels with GMS showed higher firmness compared with BW-based ones. The stronger structure network in olive oil/GMS-based oleogels provided a real physical barrier to oxidants, showing a high oxidation stability.

The harmful effects of trans and saturated fatty acids have attracted worldwide attention. Edible oleogels, which can structure liquid oils, are promising healthy alternatives to traditional fats. Active research on oleogels is focused on the interaction between unsaturated oils with different fatty acid compositions and low molecular weight or polymer oleogels. The unique network structure inside oleogels has facilitated their application in candies, spreads, meat, and other products. However, the micro- and macro-properties, as well as the functional properties of oleogels vary by preparation method and the system composition. This review discusses the characteristics of oleogels, serving as a reference for the application of oleogels in food products. Specifically, it (i) classifies oleogels and explains the influence of gelling factors on their gelation, (ii) describes the methods for measuring the physicochemical properties of oleogels, and (iii) discusses the current applications of oleogels in food products.

Pentacyclic triterpenes show potential as oleogelators, but their combination with various vegetable oils has limited research. This study selected linseed, rapeseed, sunflower, coconut, and palm oils to combine with the triterpenoid compound β-amyrin for the preparation of oleogels. The stability, crystal network structure, and other properties of each oleogel were evaluated. The correlation between different oil types and the properties of corresponding oleogels was explored. The results showed that β-amyrin formed stable oleogels with five vegetable oils under suitable temperature conditions, wherein especially the LO-based oleogel not only exhibited higher oil-binding capacity and hardness, but also demonstrated excellent stability at the microscopic level and notable rheological properties. Further analysis revealed a close correlation between the physicochemical properties of the oleogels and lipid characteristics, indicating that oleogels prepared from long-chain highly unsaturated fatty acids exhibit high stability. The above results indicate that β-amyrin can be a novel candidate oleogelator and that the oil type can modify the properties of β-amyrin-based oleogels. This study provides the latest reference for the application of pentacyclic triterpenoids in food.

This manuscript analyzes the research considering the exploitation of lecithin in oleogelation. The main objective of the work was to gather, analyze, and extract from the existing research data the information that enables us to identify lecithin-dependent roles. Oleogelation is still under research, while using various oleogelators and structurants provides changes on different physico-chemical levels. Multivariable formulations do not facilitate the elucidation of the specific role of any of them. Lecithin, due to its complex structure, big molecule, and amphiphilic nature, can provide different functionalities in complex matrices like oleogels. Therefore, this review identifies and categorizes the functionality of lecithin in oleogelation into four main roles: 1. oleogelation facilitator; 2. structure-forming impact; 3. texturing agent; and 4. functionality provider. Also, the origin and structure-forming characteristics of lecithin, as well as a short summary of the oleogelation process itself, are presented. Our critical analysis allowed us to identify the roles of lecithin in the oleogelation process and categorized them as follows: oleogelator, emulsifier, structural organization facilitator, structural modifier, crystal characteristics modifier, self-assembly promoter, thermal behavior changer, hydrogen-bonded networks promoter, hydrogel structure modifier, texture and structural modifier, gel-like state promoter, oil capacity enhancer, functionality provider, shelf life extender, and bioavailability and bioaccessibility enhancer. Lecithin came out as an important and multifunctional compound whose applications in oleogelation need to be thoroughly pre-considered. It is crucial to grasp all the possible roles of used compounds to be able to predict the final functionality and characteristics of formed oleogel matrices.

This paper aims to overview the influence of different gels that including hydrocolloids and oleogel on techno-functional changes of dairy foods. The hydrocolloids are widely added to dairy products as stabilizers, emulsifiers, and gelling agents to enhance their texture, or improve sensory properties to meet consumer needs; and the newly developed oleogel, which despite less discussed in dairy foods, this article lists its application in different dairy products. The properties of different hydrocolloids were explained in detail, meanwhile, some common hydrocolloids such as pectin, sodium alginate, carrageenan along with the interaction between gel and proteins on techno-functional properties of dairy products were mainly discussed. What\'s more, the composition of oleogel and its influence on dairy foods were briefly summarized. The key issues have been revealed that the use of both hydrocolloids and oleogel has great potential to be the future trend to improve the quality of dairy foods effectively.

Edible insects are attracting attention as an alternative food due to their excellent production efficiency, lower carbon consumption, and containing high protein. Tenebrio Molitor larvae (TM), one of the approved edible insects worldwide, contain more than 30 % fat content consisting of 70 % unsaturated fatty acids, and particularly high phospholipids. Most of the research has focused on the utilization of proteins, and there are few studies using oils from TM. Therefore, in this study, to expand the utilization of TM oil in food applications, the oleogel was prepared with TM oil fortified by the incorporation of beeswax (BSW) and glycerol monostearate (GMS), and their structure, rheological and thermal properties were evaluated. The interaction between BSW and GMS contributed to the strength of the oleogel structure. The addition of GMS or the increase of the gelator concentrations resulted in increasing the melting point, which is consistent with the observed increase in viscoelasticity. As the temperature increased, the solid fat content decreased. The result of FT-IR suggests that TM oil is physically solidified without changing chemical composition through oleogelation. This study suggests a new processing direction for edible insects by confirming the rheological, thermal, and physicochemical characteristics of TM oil-based oleogel.