UNASSIGNED: The aim of this study was to compare the fracture strength and fracture modes of post-cores produced with CAD-CAM from modified polyetheretherketone (PEEK) materials with other custom-produced post-cores.
UNASSIGNED: Sixty human mandibular first premolars with equal root sizes were used. The teeth were divided into six groups (n = 10), and root canal treatment was performed. The teeth were separated from the roots over 2 mm from the cemento-enamel junction. As a result of the decoronation process, a 1 mm wide shoulder line was obtained for all teeth. For the fracture strength test, 10 mm deep post spaces were created on the teeth with a 1.6 mm diameter driller. Post-core groups consisted: everStick® glass fiber post-core (Group GF), zirconia post-core (Group Z), metal (Cr-Co) post-core (Group M), PEEK post-core without filler (Group UP), PEEK post-core with 20% TiO2 Filler (Group TP), and post-core with 20% ceramic filler (Group CP). Following the application of posts to post spaces, copings were created and cemented on the samples. With the universal tester, a force was applied to the long axis of the tooth with a slope of 135°. The mean fracture strength (N) between the groups was statistically evaluated using one-way ANOVA, and pairwise mean differences were detected using post hoc Tukey\'s HSD test among the groups.
UNASSIGNED: According to the results of the statistical analysis, a significant difference was found between the groups in terms of mean fracture resistance (p < 0.05). Group Z (409.34 ± 45.72) was significantly higher than Group UP (286.64 ± 37.79), CP (298.00 ± 72.30), and TP (280.08 ± 67.83). Group M (376.17 ± 73.28) was significantly higher than Group UP (286.64 ± 37.79) and Group TP (280.08 ± 67.83). There were no statistically significant differences between the means of the other groups (p > 0.05). Among all the groups, Group Z exhibited a higher prevalence of repairable failure modes, while the rest of the groups predominantly experienced irreparable failure modes.
UNASSIGNED: In our study, zirconia and metal post-core samples showed higher average fracture strength values than PEEK post-cores groups. Repairable failure modes were more common in the zirconia post-cores, whereas the opposite was observed in the other groups. Further experimental and clinical trial studies are needed before PEEK materials can be used as post materials in the clinic.

BACKGROUND: Achieving clinically adequate retention for cast crowns in prepared short abutments represents a major challenge for practicing dentists. Despite the important developments with adhesive cement, only a few teeth can be treated this way, and conventional preparation techniques are still employed for most crowns. Numerous options for auxiliary features exist; however, there is no consensus about one preferred method. This study aimed to evaluate the effect of a new innovative technique called the \"double finish line technique\" on full-crown retention for short abutments and to compare it with another modified preparation method.
METHODS: A comparative in vitro experimental study was conducted at the Department of Fixed Prosthodontics, Damascus University. The study sample consisted of 30 chromium-cobalt abutments and 30 metal crowns. The sample was divided into three equal groups. The first group was a control group (CG) with a 20-degree total occlusal convergence, 3 mm height, and a 0.5 mm chamfer finish line. The second group had a reduced total occlusal convergence (TOC) in the cervical 1.5 mm of the axial wall from 20 to 8 degrees. The third group implemented the so-called \"double finish line technique,\" adding another 0.5 mm chamfer finish line 1 mm above the first finish line (DFL group). The metal crowns were cemented to metal dies with zinc-phosphate cement. Pull-off tests were applied until failure. Data were analyzed, and the differences between the three groups were detected using one-way ANOVA followed by Bonferroni\'s post-hoc tests (p<0.05).
RESULTS: The mean tensile strength values for the specimens were 115.36 (SD=14.59), 149.60 (SD=11.10), and 42.46 (SD=11.54) for the TOC, DFL, and CR groups, respectively.
CONCLUSIONS: The reduced total occlusal convergence and double finish line techniques effectively increased full crown retention and resistance cemented on short abutments.

Background and Objectives: Gingival retraction is a critical pre-impression procedure in fixed prosthodontics, crucial for exposing tooth margins and ensuring accurate impressions for restorations like crowns and bridges. This study aimed to evaluate the absorptive capacity of different gingival retraction cords. Materials and Methods: Ninety samples each of Ultrapak (Ultradent, South Jordan, UT, USA) #00, braided cord, coreless thread, and monofilament thread (totaling 270 samples) were immersed in 0.9% NaCl, 10% aluminum chloride, and 12.7% ferrous sulfate solutions for 120, 300, and 1200 s. The liquid absorption capacity was measured using a gravimetric method, and the data were analyzed using an F-test, setting the significance threshold at p < 0.05. Results: The results revealed statistically significant differences in absorption, particularly for aluminum chloride and ferric sulfate (p < 0.001). Ultrapak demonstrated the highest absorption, followed by the coreless cotton thread, while the monofilament thread absorbed the least, especially at 1200 s. Conclusions: These findings indicate that Ultrapak\'s superior absorption could enhance moisture control during procedures, highlighting the importance of selecting an appropriate retraction cord for optimal clinical outcomes. Further research is needed to confirm these findings in a clinical setting.

UNASSIGNED: To determine the effect of experience and tooth location on the finish line width and angle of crown preparations performed by undergraduate students.
UNASSIGNED: Eighty full metal crown preparations on typodont teeth were divided into four groups: Group 1: 20 preparations performed on mandibular first molar in the first semester. Group 2: 20 preparations performed on mandibular first molar in the second semester. Group 3: 20 preparations performed on mandibular second molar in the first semester. Group 4: 20 preparations performed on mandibular second molar in the second semester. All prepared teeth were scanned, and the finish line width and angles were measured at 8 different locations. Paired t-test in the SPSS software was used to compare and determine the effect of experience and tooth location on the students\' performance.
UNASSIGNED: There was a statistically significant difference in the mandibular first molar finish line width between the first and second semesters for the same student in the distal, distolingual, and mesiobuccal areas of the tooth. There was a statistically significant increase in finish line width between first and second molars in the distobuccal, distal, distolingual, lingual, and mesial side of the tooth. Regarding the finish line angle, there was a statistically significant difference between the first and second semesters on the distal side of the tooth. There was a statistically significant increase in finish line angle between first and second molars in the distobuccal side of the tooth.
UNASSIGNED: As students gain more experience in different types of tooth preparations, they tend to produce a wider finish line than that recommended for full metal crown preparation. The tooth location in the mouth influences the width and angle of the finish line hence the more inaccessible areas on the tooth have a wider finish line.

Lasers are employed in all fields of modern dentistry nowadays, including both surgical and non-surgical dental procedures. Prosthodontics, a branch of dentistry, has also embraced lasers as an invaluable addition to conventional methodologies. This helps improve the standard of care for patients and dentists due to its precise excision, quick healing, and enhanced tissue response after surgeries. In prosthodontics, the most commonly used lasers are carbon dioxide, argon, and yttrium-aluminum-garnet (YAG) lasers. Many reviews have been published in the literature regarding the use of lasers in dentistry; however, reviews on the use of lasers in the field of prosthodontics are limited. This review aims to explain the diverse applications and advancements of lasers in prosthodontics. Furthermore, it will highlight the integration of lasers in diagnostic protocols, treatment modalities, and the fabrication of prosthetic restorations.

Sjögren\'s syndrome is a chronic, inflammatory autoimmune disorder characterized by lymphocyte infiltration of the exocrine glands. Notably, the rehabilitation of partially edentulous patients with Sjögren\'s syndrome is limited by the scarce availability of studies that could inform therapeutic modalities and potential challenges during clinical procedures. This case report aimed to present the oral rehabilitation of a patient with Sjögren\'s syndrome who received fixed partial dentures (FPDs). A 28-year-old female patient sought treatment to restore her missing teeth. She was diagnosed with Sjögren\'s syndrome by a rheumatologist adhering to the revised version of the European criteria proposed by the American-European Consensus Group and was on a medication regimen including prednisolone, hydroxychloroquine, pantoprazole, pilocarpine, and tear substitutes to manage her condition. The final treatment plan consisted of extractions, management of gingivitis, post-and-core restorations, and a 2 mm vertical dimension increase with the placement of 15 porcelain-fused-to-metal (PFM) crowns and 4 short-span bridges. The patient underwent regular clinical and radiographic evaluations every 3 months since June 2020. Throughout this period, the fixed prostheses, teeth, and periodontal tissues demonstrated remarkable stability and exhibited no complications. This three-year case study provides evidence that meticulous planning and clinical execution can facilitate successful oral rehabilitation in young edentulous patients with Sjögren\'s syndrome. Tooth-supported fixed prostheses can effectively restore oral function and aesthetic appeal in these individuals, provided they undergo more frequent dental examinations than the general population and maintain a cooperative attitude throughout the treatment process.

The effectiveness of newly developed elastomeric polymer hybrid siloxane (PVES), which combines the properties of polyethylene (PE) and polyvinyl siloxane (PVS) elastomers, has been a subject of interest in recent studies. This study aimed to assess the physical properties of hybrid PVES materials by analyzing existing data from recent studies on this topic.
A systematic literature search was conducted to retrieve peer-reviewed articles published up to February 5, 2023. The population, intervention, comparison, and pertinent outcomes were specified under the PICO framework. The primary data analysis was performed in Microsoft Excel, while statistical analysis used Meta-Essentials.
Of the 1152 articles assessed, 14 met the inclusion criteria. The meta-analysis of the selected studies indicated that polyether (PE) and polyvinyl siloxane (PVS) were highly correlated (two-tailed p-values of 0.000 and 0.001, respectively) with the improved tensile strength of vinyl polyether siloxane (PVES) with a significantly positive effect size. Similarly, the hydrophilic characteristics of PVES were significantly improved compared to those of PE and PVS. PE was a significant contributor to the hydrophilic characteristics of PVES, with a two-tailed p-value of 0.000. The effect size was highly positive for hydrophilicity but showed high heterogeneity. It was also observed that the dimensional accuracy of PVES was comparable to those of PE and PVS, with no statistically significant differences among the three materials.
PVES showed promising features, with improved tensile strength and hydrophilic characteristics compared to those of PE and PVS.

This article presents the outcomes of prosthetic oral rehabilitation using CAD/CAM telescopic bar overdentures in patients with oral cancer (n = 3), severe facial trauma (n = 2), or various syndromes (n = 1), all suffering from severe tissue deficits and requiring complex and comprehensive oral rehabilitation. The aim was to assess the durability and functionality of implant-retained prosthetic structures, ensuring easy oral hygiene and minimizing specialized follow-up needs. The data for this study were sourced from a retrospective cohort at Helsinki University Hospital. The prosthetic reconstruction encompassed the Atlantis 2in1 and the Createch removable telescopic systems. Thus, 40 implants were placed (4 to 7 per patient), with prosthetic structures in the maxilla (n = 4 patients), in the mandible (n = 1), and in both jaws (n = 1). Two patients experienced no complications, two patients had part of the acrylic resin break, and one patient experienced loosening of the bar structure. All complications associated with prosthetic structures were successfully managed, and none of the implants were lost. The follow-up time ranged from 7 to 126 months. This rehabilitation is proved to be an effective solution for patients with complex oral conditions, facilitating both functional restoration and ease of maintenance. These findings underscore the importance of individualized treatment approaches in cases of tissue deficits.

This patient series reports the outcomes of CAD/CAM prosthetic reconstructions in patients with cleft lip and palate (n = 9, aged 27 to 76) who have experienced significant failure with conventional restorative and fixed prosthodontic treatments. The objective of the protocol is to establish a functional and patient-friendly prosthetic structure for individuals with unilateral/bilateral cleft lip and palate (UCLP/BCLP) while minimising the requirement for specialised follow-up care in the cleft unit. The study data were obtained from a retrospective cohort at Helsinki University Hospital. Prosthetic reconstructions were performed using CAD/CAM bar structures by the Atlantis 2in1 system or Createch removable telescope structures, supported by four to eight maxillary dental implants. Out of the nine patients, seven experienced no complications. One prosthesis fracture occurred after 16 months due to a design error in the original framework, and one patient experienced failure of osseointegration in a dental fixture (specifically, one fixture out of the eight maxillary implants in this patient). In total, 56 implants were successfully placed. The maxillary dentition of elderly patients with cleft lip and palate often poses challenges due to periodontal and reconstructive issues. An implant-supported CAD/CAM bar with a removable telescope suprastructure offers an easily maintained and functional solution for dental rehabilitation.

OBJECTIVE: The objective of this study was to explore current trends in undergraduate fixed prosthodontics teaching at undergraduate dental level education.
METHODS: This cross-sectional descriptive study included close-ended questions to inquire about the teaching practices of fixed prosthodontics at Bachelor of Dental Surgery level education. Electronic copies of the survey forms were sent to the heads or directors of department of prosthodontics responsible for undergraduate dental students teaching and learning in various institutes of Sindh by the help of Google forms in December 2020. The form included questions on sociodemographic details and questions inquiring the theoretical and clinical teaching practices in undergraduate fixed prosthodontics course. Data was entered and analyzed using SPSS 25. Frequency distribution and percentages of categorical variables were recorded.
RESULTS: Out of total 18 dental institutes of Sindh, 15 returned the completely filled form, giving a response rate of 83.3%. Seven (46.7%) schools teach various fixed prosthesis in the preclinical years to their students. All 15 colleges carry out didactic teaching and provide exposure by live clinical demonstrations for various fixed prosthesis. Faculty of 12 (80%) dental colleges where fixed prostheses are being constructed in the dental outpatient department mentioned that their students observe or assist the clinical procedures during their clinical rotation; but none of the students fabricate any type of fixed prosthesis in the clinical setting during their undergraduate years.
CONCLUSIONS: Didactic teaching and live clinical demonstrations of fixed prosthodontics is being carried out in all dental colleges of Sindh. Almost half of the dental schools teach crown preparation on phantom teeth during their preclinical course. Contrary to this, none of the students fabricate any type of fixed prosthesis in the clinical setting during their undergraduate years. As these procedures are not included in the current undergraduate curriculum, recommendations should be forwarded to governing educational body of the country to include cases of fixed prosthesis in their skill set prior to their graduation.