METHODS: This is a randomized, controlled, superiority, double-blinded, parallel-group, two-arms trial with an allocation ratio of 1:1. This study aimed to assess whether the cavity design could affect the clinical performance of the CAD/CAM generated indirect resin composite restoration in endodontically treated teeth (ETT) evaluated using the Modified USPHS criteria after a two-year follow up.
METHODS: A total of 30 participants who underwent endodontic treatment for MOD cavities in permanent molars were divided randomly into two parallel groups (n = 30 restorations) according to the performed cavity design to group 1 in which there was no cuspal reduction (inlay) and group 2 in which cuspal reduction was performed (overlay). All pulp chambers were filled with bulk fill flowable composite, and the cavities were prepared following the criteria of the cavities for indirect restorations and restored using nano-hybrid composite resin blocks (Brilliant, Coltene, Switzerland). The restorations were evaluated using the modified USPHS criteria at baseline, six months, one-year and two years follow-up visits. For qualitative data, frequencies (n) and percentages (%) were used to display the data, while mean and standard deviation (SD) were used for quantitative data. The normality of the data was evaluated using the Shapiro-Wilk and Kolmogorov-Smirnov tests. For every test, P ≤ 0.05 was used as the significance threshold.
RESULTS: Twenty-six individuals completed the follow-up period after receiving the assigned intervention.The inter-group comparison showed that, at the 6- months and 12- months observation points, the overlay design had significantly better marginal adaptation, less incidence of discoloration or tooth/restoration fracture, and similar marginal integrity and caries incidence to the inlay design. After 24- months, the overlay design still had better marginal adaptation, less incidence of discoloration or tooth/restoration fracture and less caries incidence in comparison to the inlay design, while there was no difference in the marginal integrity between either design.
CONCLUSIONS: Cuspal reduction in endodontically treated teeth showed better clinical performance than the cusp preservation thus, the former is more reliable.

BACKGROUND: Multi-rooted teeth with extensive dental defects often face challenges in stability and biomechanical failure. High-performance polymer PEEK materials, with properties closer to dentin, show promise in reducing stress concentration and preserving tooth structure. This report aimed to explore the use of a highly retentive polyetheretherketone (PEEK) for manufacturing custom-made split post and core for the restoration of grossly destroyed endodontically treated molars.
METHODS: A 40-year-old female patient presented with complaints of loss of tooth substance in the posterior mandibular tooth. This case involved the digital design and fabrication of PEEK split post and core to restore multirooted molar with insufficient dental tissue remnants. The restorations were evaluated over a 3-year follow-up using the World Federation criteria (FDI). The restoration was clinically evaluated through intraoral examination, radiographic assessment, and subjective patient satisfaction, and was deemed clinically good according to FDI criteria.
CONCLUSIONS: The outstanding mechanical properties of PEEK, coupled with the structure of the split post, provide an effective treatment option for weakened multirooted teeth. Simultaneously, the restoration configuration effectively addressed the challenge of varying postinsertion directions, and the interlocking mechanism between the primary and auxiliary posts enhanced the stability of the post and core.

UNASSIGNED: Endodontic treatment is the most common method for resolving pulpal and periapical pathology. However, various studies have reported that almost 11%-13% of all teeth that undergo extraction after endodontic treatment show the presence of cracks, craze lines, and vertical root fractures. Teeth with inadequate post endodontic restoration are more prone to fracture and coronal leakage, resulting in the diffusion of oral fluids, bacteria, bacterial products, and possibly root canal treatment failure. Furthermore, studies have advocated the use of endodontically treated teeth with restorative materials that have a similar or higher elastic modulus than the tooth for providing stiffness against forces that cause root fracture. Intraorifice barriers made of restorative materials that can bond to radicular dentin could thus be used to reinforce the radicular dentin while also preventing coronal microleakage. Although the sealing ability of intraorifice barriers has been widely compared in the literature, there have been few studies on the strengthening effect of the materials used in the study as intraorifice barriers when placed into the root canal. As a result, the current in vitro study aims to assess the effect of various materials as intraorifice barriers (Cention N, Resin modified glass ionomer cement, and short fiber reinforced flowable composite) on the force required fracture teeth after root canal treatment.
UNASSIGNED: This in vitro study will be done on extracted human mandibular premolars with single root canal where after doing root canal treatment 2-3 mm obturating material would be replaced by intra orifice barriers (Cention N, resin modified glass ionomer cement [RMGIC], and short fiber reinforced flowable composite). The force required to fracture teeth will be calculated using universal testing machine.

This study aimed to evaluate the bond strength between relined fiberglass posts with different composite resin opacities in different thirds of the intraradicular dentin. Thirty single-rooted premolars were endodontically treated and divided into three groups (n=10): fiberglass posts relined with translucent composite resin, fiberglass posts relined with opaque composite resin, and fiberglass posts without relining. After cementation of the posts, the specimens were cut perpendicular to the long axis of the tooth in slices of approximately 1.3 mm of each third to be analyzed (cervical, middle, and apical) and then subjected to the push-out test. The bond strength (MPa) data were subjected to Shapiro-Wilk normality tests and two-way repeated measures analysis of variance, considering the experimental groups and different regions as study factors. Tukey\'s post-hoc test (p<.05) was applied for comparisons between the groups. In the cervical third, higher values of bond strength were found for the group relined with translucent resin, with a statistically significant difference for the other groups. In the other regions, both opaque and translucent resins showed similar results, but both showed higher values of bond strength compared to fiberglass posts without relining. The bond strength of fiberglass posts to different thirds of intraradicular dentin is influenced by composite resin relining as well as the opacity of the resin. The use of translucent composite resin is a more effective alternative for fiberglass posts relining.

OBJECTIVE: Sodium hypochlorite solution (NaOCl) is an effective canal irrigant but interferes with the mechanical features of dentin and the bonding capability of adhesives when restoring endodontically treated teeth. This study evaluated whether access cavity resin sealing before using canal irrigant would augment the resistance of endodontically treated anterior teeth against fracture.
METHODS: Sixty maxillary incisors underwent endodontic treatment in five groups (n = 12). Irrigation with 5.25% NaOCl and 17% ethylenediaminetetraacetic acid (EDTA) was performed in all groups except for Group 5. After root canal obturation, in Group 1, the access cavity was kept unrestored. In Group 2, immediate restoration after obturation was achieved. For Group 3, delayed restoration after 1 week was provided. In Group 4 (pre-sealed), before canal irrigation, the dentin surface of access cavities was sealed using self-adhesive composite resin (Vertise Flow) and then restored after obturation. In Group 5, which was saline irrigated, immediate restoration was performed. After storage and thermal cycling for 5000 cycles at 5°C-55°C with a dwell time of 15 s and a transfer time of 5 s, teeth were statically loaded by a universal testing machine until a fracture occurred. Data were collected as the fracture resistance (FR) and analyzed using the one-way analysis of variance and Tukey\'s tests.
RESULTS: FR significantly differed between all groups (p < 0.001). The lowest FR was recorded in the unrestored group (284 ± 86 N), which was not statistically different from the immediately restored group (p = 0.065). The pre-sealed group exhibited the highest FR value (810 ± 127 N, p ≤ 0.02 vs. other groups). The FR of the saline-irrigated and delayed restored groups was almost similar (p = 0.13).
CONCLUSIONS: NaOCl/EDTA irrigation resulted in an adverse effect on FR. Delayed restoration could reduce this adverse effect. Access cavity pre-sealing with flowable composites led to a higher FR than conventional methods and may be considered an effective step during treatment procedures.

OBJECTIVE: The study aimed to investigate the sinus membrane thickness (SMT) adjacent to healthy endodontically-treated maxillary molars with or without protruded apical foramen into the sinus cavity using cone-beam computed tomography (CBCT).
METHODS: Images of 207 non-smoker patients aged 18-40 were retrospectively analyzed, 140 were endodontically treated, and 136 were without endodontic treatment. Patients with any sinus pathology, teeth that have symptoms, or poor root filling were excluded. Study groups consisted of Group EM-I (endodontically treated and protruded apical foramen), Group EM-C (endodontically treated and contacted apical foramen), and similarly without endodontic treatment; Group M-I and Group M-C. SMT upon the mesial, distal, and palatal roots was measured. One-way ANOVA and Student\'s t-tests were performed.
RESULTS: Group EM-I had the thickest sinus membrane compared to other groups (p = 0.013). SMT values were 2.37-2.60 mm in Group EM-I, and 1.34-1.58 mm in other groups. Thickening (> 2 mm) percentages were 33.45% in Group EM-I and between 4.25 and 8.25% in other groups. No statistical difference was detected between first and second molars and genders (p > 0.05).
CONCLUSIONS: When the apical foramen protruded into the sinus cavity, the conventional root canal treatment caused a minimal (between 2.37 mm and 2.60 mm) sinus membrane thickening with a rate of 33.45% based upon CBCT examinations.

A high prevalence of post-treatment apical periodontitis associated to variables such as endodontic treatment quality and missed canals has been reported.
OBJECTIVE: The aim of this study was to evalúate the quality of endodontic treatment and the frequency of missed canals associated with teeth with apicalperiodontitis (AP) through CBCTin a Colombian sub-population.
METHODS: This was a cross-sectional study assessing 318 cone beam computed tomography (CBCT) scans of endodontically treated teeth from Colombian individuals. The scans were taken using J Morita X550 (J Morita Corporation, Osaka, Japan), with voxel size 0.125 to 0.20 mm. All endodontically treated teeth were assessed for quality of treatment, presence of missed canals and AP. Allsamples were analyzed bytwo endodontics specialists and an radiology specialist. Chi-square or Fisher \'s test and odds ratio were calculated to identify the association and risk relationship between the presence of AP and the study variables.
RESULTS: Missed canals were found in 18.61% (86/462), and 95.3% were associated with AP. The frequency of AP was 62.34% (288/462) for all the evaluated teeth. AP was found in 27.43 % (79/288) of the teeth with adequate endodontic treatment, in contrast to 72.57% (209/288) of the teeth with inadequate treatment (P<0.01). The frequency of missed canals was highest in maxillary molars, with 55.23% (58/105), with 96.55% presenting AP. The second mesiobuccal canal wasthe most frequently missed canal, 88.52%o(54/61), with AP in 90.74% (49/54) of the cases.
UNASSIGNED: There was a high frequency of teeth with missed canals and PA. More than half of the teeth with missed canals were maxillary molars, with MB2 being the most common canal, commonly presenting apical periodontitis.
Uma alta prevalência de periodontite apical pós-tratamento associada a variáveis como qualidade do tratamento endodôntico e fracasso do tratamento é relatada na literatura. O objetivo deste estudo foi avaliar a qualidade do tratamento endodôntico e a frequência e fracasso do tratamento associados a dentes com periodontite apical (PA) por meio de tomografia computadorizada de feixe cônico (TCFC) em uma subpopulação colombiana.
UNASSIGNED: Este foi um estudo transversal que avaliou 318 tomografias computadorizadas de dentes tratados endodonticamente de indivíduos colombianos. Os exames foram realizados utilizando o tomógrafo J Morita X550, com tamanho de voxel de 0,125 a 0,20 mm. Todos os dentes tratados endodonticamente foram avaliados quanto à qualidade do tratamento, presença de canais não localizados e AP. Todas as amostras foram avaliadas por dois especialistas em endodontia e um especialista em radiologia. Foram calculados o teste qui-quadrado ou de Fisher e a razão de chances para identificar associação e relação de risco entre a presença de PA e as variáveis do estudo.
RESULTS: Foram encontrados canais não localizados em 18,61% (86/462) e 95,3% estavam associados à PA. A frequência de AP foi de 62,34% (288/462) para todos os dentes avaliados. AP foi encontrada em 27,43% (79/288) dos dentes com tratamento endodôntico adequado, em contraste com 72,57% (209/288) dos dentes com tratamento inadequado (P<0,01). A frequência de canais não localizados foi maior nos molares superiores, com 55,23% (58/105), sendo que 96,55% apresentavam PA. O canal mésio-palatino (MB2) apresentou maior frequência de canal não localizado (88,52% - 54/61), com PA em 90,74% (49/54) dos casos.
UNASSIGNED: Houve alta frequência de dentes com canais não localizados e com PA. Mais da metade dos dentes com canais não localizados eram molares superiores, sendo o MB2 é o canal com a maior frequência, comumente apresentando periodontite apical.

OBJECTIVE: To evaluate the effect of the labiolingual diameter and construction of an endodontically treated (ET) anterior tooth with crown restoration on stress distribution and biomechanical safety under occlusal loading.
METHODS: Three-dimensional finite element models were generated for maxillary central incisors with all-ceramic crown restorations. The labiolingual diameters of the tooth, defined as the horizontal distance between the protrusion of the labial and lingual surfaces, were changed as follows: (D1) 6.85 mm, (D2) 6.35 mm, and (D3) 5.85 mm. The model was constructed as follows: (S0) vital pulp tooth; (S1) ET tooth; (S2) ET tooth with a 2 mm ferrule, restored with a fiber post and composite resin core; (S3) ET tooth without a ferrule, restored with a fiber post and composite resin core. A total of 12 models were developed. In total, two force loads (100 N) were applied to the crown\'s incisal edge and palatal surface at a 45° oblique angle to the longitudinal axis of the teeth. The Von Mises stress distribution and maximum stress of the models were analyzed.
RESULTS: Regardless of the loading location, stress concentration and maximum stress (34.07~66.78MPa) in all models occurred in the labial cervical 1/3 of each root. Both labiolingual diameter and construction influenced the maximum stress of the residual tooth tissue, with the impact of the labiolingual diameter being greater. A reduction in labiolingual diameter led to increased maximum stress throughout the tooth. The ferrule reduced the maximum stress of the core of S2 models (7.15~10.69 MPa), which is lower compared with that of S3 models (19.45~43.67 MPa).
CONCLUSIONS: The labiolingual diameter exerts a greater impact on the biomechanical characteristics of ET anterior teeth with crown restoration, surpassing the influence of the construction. The ferrule can reduce the maximum stress of the core and maintain the uniformity of stress distribution.

BACKGROUND: An optimum restoration for reconstructing endodontically treated teeth should provide excellent marginal adaptation, high fracture resistance as well as maximum tooth structure conservation. The purpose of this study was to evaluate the marginal adaptation and fatigue resistance of different coronal restorations in endodontically treated premolars.
METHODS: Thirty sound maxillary first premolars were endodontically treated and received MOD cavities. Teeth were randomly allocated into three groups (n = 10) according to the type of coronal restoration: Group R: polyethylene fibers (ribbond), fibers-reinforced composite (everX posterior) and final layer of nano-hybrid composite. Group O: indirect lithium disilicate overlay and Group C: fiber-post, resin composite restoration, and lithium disilicate crown. Marginal gap assessment was performed before and after thermocycling (5000 cycles) using stereomicroscope. Samples were subjected to stepwise-stress loading starting at 200 N, and increased by 100 N in each step until failure occurred. Statistical analysis was done by One-way ANOVA followed Tukey`s Post Hoc test for multiple comparison. Paired t test was used to compare the marginal adaptation before and after thermocycling. Survival probability was evaluated by Life table survival analysis. Failure mode analysis was performed with Chi-square test.
RESULTS: Marginal gap was significantly the lowest in group R (37.49 ± 5.05) and (42.68 ± 2.38), while being the highest in group C (59.78 ± 5.67) and (71.52 ± 5.18) in before and after thermocycling respectively (P < 0.0001). Fatigue resistance was the highest for group O (1310.8 ± 196.7), and the lowest for group R (905.4 ± 170.51) with a significant difference between groups (P < 0.0001). Crown group had the highest percentage (80%) of catastrophic failure, while, overlay group exhibited the lowest (20%).
CONCLUSIONS: Direct restoration without cuspal coverage using ribbon fibers with short FRC provided better marginal adaptation than indirect overlays and crowns, but fatigue resistance wasn\'t significantly improved. Adhesive ceramic overlays showed the best fatigue performance and the least catastrophic failure rate compared to both direct fiber-reinforced composite and indirect ceramic full coverage restorations.
CONCLUSIONS: Indirect adhesive overlays are a suitable, more conservative restorative option for endodontically treated teeth than full coverage restorations, especially when tooth structure is severely compromised.

OBJECTIVE: This study aimed to evaluate the fracture strength of teeth restored using fiber-reinforced direct restorative materials after endodontic treatment with a conservative mesio-occlusal access cavity design.
METHODS: A total of 100 extracted intact mandibular first molars were selected and distributed into a positive control group where teeth left intact and the following four test groups comprised of teeth with conservative mesio-occlusal access cavities that had undergone root canal treatment (n = 20/group): access cavity without restoration (negative control), bulk-fill resin composite with horizontal glass fiber post reinforcement, fiber-reinforced composite with bulk-fill resin and bulk-fill resin composite. Following thermocycling (10,000 cycles), fracture resistance was measured using a universal testing machine. Statistical analyses (one-way analysis of variance and the Tamhane test) were performed, and statistical significance was set at p < 0.05.
RESULTS: Groups with minimally invasive access cavities had lower fracture strength than intact teeth, regardless of the restoration material (p < 0.05). Fiber-reinforced composite groups demonstrated higher fracture strength than bulk-fill resin composite alone (p < 0.05). Fracture types varied among groups, with restorable fractures predominant in the fiber-reinforced composite groups.
CONCLUSIONS: This study suggests that using fiber-reinforced composite materials, especially in combination with bulk-fill resin composites, can effectively enhance the fracture strength of endodontically treated teeth with conservative access cavities. However, using only bulk-fill resin composite is not recommended based on the fracture strength results.
CONCLUSIONS: When teeth that undergo endodontic treatment are restored using a conservative access cavity design and fiber-reinforced composite materials, especially in combination with bulk-fill resin composites, the fracture strength of the teeth can be effectively increased.