In this paper, the experimental results on microphone virtualization in realistic automotive scenarios are presented. A Temporal Convolutional Network (TCN) was designed in order to estimate the acoustic signal at the driver\'s ear positions based on the knowledge of monitoring microphone signals at different positions-a technique known as virtual microphone. An experimental setup was implemented on a popular B-segment car to acquire the acoustic field within the cabin while running on smooth asphalt at variable speeds. In order to test the potentiality of the TCN, microphone signals were recorded in two different scenarios, either with or without the front passenger. Our experimental results show that, when training is performed in both scenarios, the adopted TCN is able to robustly adapt to different conditions and guarantee a good average performance. Furthermore, an investigation on the parameters of the Neural Network (NN) that guarantee the sufficient accuracy of the estimation of the virtual microphone signals while maintaining a low computational complexity is presented.

Temporal interference deep-brain magnetic stimulation (TI-DMS) induces rhythmic electric field (EF) in the hippocampus to normalize cognitive function. The rhythmic time series of the hippocampal EF is essential for the assessment of TI-DMS. However, the finite element method (FEM) takes several hours to obtain the time series of EF. In order to reduce the time cost, the temporal convolutional network (TCN) model is adopted to predict the time series of hippocampal EF induced by TI-DMS. It takes coil configuration and loaded current as input and predicts the time series of maximum and mean values of the left and right hippocampal EF. The prediction takes only a few seconds. The model parameter combination of kernel size and layers is selected optimally by cross-validation method. The experimental results for multiple subjects show that the R2 of all the time series predicted by the model exceed 0.98. And the prediction accuracy is even higher as the input parameters approach the training set. These results demonstrate that the adopted model can quickly predict the time series of hippocampal EF induced by TI-DMS with relatively high accuracy, which is beneficial for future clinical applications.

Accurate penetration rate prediction enhances rock-breaking efficiency and reduces disc cutter damage in tunnel boring machine (TBM) construction. However, this process faces significant challenges such as the high uncertainty of ground conditions and the complexity of maintaining optimal TBM operation in long and large tunnels. To address these challenges, we propose TCN-SENet++, a novel hybrid multistep real-time penetration rate prediction model that combines a temporal convolutional network (TCN) and a squeeze-and-excitation (SENet) block for aided tunneling. This study aims to demonstrate the application of TCN-SENet++, as well as other models such as RNN, LSTM, GRU, and TCN, for TBM penetration rate prediction. The model was developed using actual datasets collected from the Yin-Song diversion project. We employ a 30-s time step to predict the future time steps of the penetration rate (1st, 3rd, 5th, 7th, and 9th). The features that influence the penetration rate, such as the cutterhead torque, thrust, and cutterhead power, were considered. A comparative analysis using the mean absolute error and mean squared error revealed that the TCN-SENet++ model outperformed the other models, including RNN, LSTM, GRU, TCN, and TCN-SENet+. In comparison, TCN-SENet++ achieved average MSE reductions of 18%, 6%, 3%, 1%, and 2%, respectively. The TCN-SENet++ model demonstrated fewer errors in the new project, validating its effectiveness and suitability for real-time penetration rate prediction in TBM construction.

Accurate power load forecasting is crucial for the sustainable operation of smart grids. However, the complexity and uncertainty of load, along with the large-scale and high-dimensional energy information, present challenges in handling intricate dynamic features and long-term dependencies. This paper proposes a computational approach to address these challenges in short-term power load forecasting and energy information management, with the goal of accurately predicting future load demand. The study introduces a hybrid method that combines multiple deep learning models, the Gated Recurrent Unit (GRU) is employed to capture long-term dependencies in time series data, while the Temporal Convolutional Network (TCN) efficiently learns patterns and features in load data. Additionally, the attention mechanism is incorporated to automatically focus on the input components most relevant to the load prediction task, further enhancing model performance. According to the experimental evaluation conducted on four public datasets, including GEFCom2014, the proposed algorithm outperforms the baseline models on various metrics such as prediction accuracy, efficiency, and stability. Notably, on the GEFCom2014 dataset, FLOP is reduced by over 48.8%, inference time is shortened by more than 46.7%, and MAPE is improved by 39%. The proposed method significantly enhances the reliability, stability, and cost-effectiveness of smart grids, which facilitates risk assessment optimization and operational planning under the context of information management for smart grid systems.

N4-acetylcysteine (ac4C) is a chemical modification in mRNAs that alters the structure and function of mRNA by adding an acetyl group to the N4 position of cytosine. Researchers have shown that ac4C is closely associated with the occurrence and development of various cancers. Therefore, accurate prediction of ac4C modification sites on human mRNA is crucial for revealing its role in diseases and developing new diagnostic and therapeutic strategies. However, existing deep learning models still have limitations in prediction accuracy and generalization ability, which restrict their effectiveness in handling complex biological sequence data. This paper introduces a deep learning-based model, STM-ac4C, for predicting ac4C modification sites on human mRNA. The model combines the advantages of selective kernel convolution, temporal convolutional networks, and multi-head self-attention mechanisms to effectively extract and integrate multi-level features of RNA sequences, thereby achieving high-precision prediction of ac4C sites. On the independent test dataset, STM-ac4C showed improvements of 1.81%, 3.5%, and 0.37% in accuracy, Matthews correlation coefficient, and area under the curve, respectively, compared to the existing state-of-the-art technologies. Moreover, its performance on additional balanced and imbalanced datasets also confirmed the model\'s robustness and generalization ability. Various experimental results indicate that STM-ac4C outperforms existing methods in predictive performance. In summary, STM-ac4C excels in predicting ac4C modification sites on human mRNA, providing a powerful new tool for a deeper understanding of the biological significance of mRNA modifications and cancer treatment. Additionally, the model reveals key sequence features that influence the prediction of ac4C sites through sequence region impact analysis, offering new perspectives for future research. The source code and experimental data are available at https://github.com/ymy12341/STM-ac4C.

A single network model exhibits limitations in the life prediction of rotating machinery for the various fault types and uncertain fault occurrence. Therefore, a network prediction model combining multi-domain feature fusion (MDFF) and distributed TCN-Attention-BiGRU (DITCN-ABiGRU) is proposed to enable a more accurate life prediction of rotating machinery. Firstly, the features of vibration signals collected from multiple sensors are extracted in the time, frequency, and time-frequency domains. Subsequently, dimensionality reduction optimization is conducted on these multi-domain features to eliminate useless information features. The temporal convolutional network (TCN) model is constructed to capture the critical information reflecting the fault characteristics of rotating machinery through the attention mechanism, and the dependencies of the whole training process are captured by the BiGRU network. Finally, precise prediction of the lifespan of rotating machinery is achieved by constructing a health indicator curve (HI). The proposed methods are verified through the life prediction of rolling bearings from the IEEE PHM Challenge 2012 dataset and ball screw pairs from a designed experiment. The experimental results show that the proposed MDFF and DITCN-ABiGRU model achieves a better score and lower error than the convolutional neural network (CNN) and GRU models.

Atrial fibrillation, one of the most common persistent cardiac arrhythmias globally, is known for its rapid and irregular atrial rhythms. This study integrates the temporal convolutional network (TCN) and residual network (ResNet) frameworks to effectively classify atrial fibrillation in single-lead ECGs, thereby enhancing the application of neural networks in this field. Our model demonstrated significant success in detecting atrial fibrillation, with experimental results showing an accuracy rate of 97% and an F1 score of 87%. These figures indicate the model\'s exceptional performance in identifying both majority and minority classes, reflecting its balanced and accurate classification capability. This research offers new perspectives and tools for diagnosis and treatment in cardiology, grounded in advanced neural network technology.

BACKGROUND: In clinical medicine, fetal heart rate (FHR) monitoring using cardiotocography (CTG) is one of the most commonly used methods for assessing fetal acidosis. However, as the visual interpretation of CTG depends on the subjective judgment of the clinician, this has led to high inter-observer and intra-observer variability, making it necessary to introduce automated diagnostic techniques.
METHODS: In this study, we propose a computer-aided diagnostic algorithm (Hybrid-FHR) for fetal acidosis to assist physicians in making objective decisions and taking timely interventions. Hybrid-FHR uses multi-modal features, including one-dimensional FHR signals and three types of expert features designed based on prior knowledge (morphological time domain, frequency domain, and nonlinear). To extract the spatiotemporal feature representation of one-dimensional FHR signals, we designed a multi-scale squeeze and excitation temporal convolutional network (SE-TCN) backbone model based on dilated causal convolution, which can effectively capture the long-term dependence of FHR signals by expanding the receptive field of each layer\'s convolution kernel while maintaining a relatively small parameter size. In addition, we proposed a cross-modal feature fusion (CMFF) method that uses multi-head attention mechanisms to explore the relationships between different modalities, obtaining more informative feature representations and improving diagnostic accuracy.
RESULTS: Our ablation experiments show that the Hybrid-FHR outperforms traditional previous methods, with average accuracy, specificity, sensitivity, precision, and F1 score of 96.8, 97.5, 96, 97.5, and 96.7%, respectively.
CONCLUSIONS: Our algorithm enables automated CTG analysis, assisting healthcare professionals in the early identification of fetal acidosis and the prompt implementation of interventions.

Gait analysis plays a crucial role in detecting and monitoring various neurological and musculoskeletal disorders early. This paper presents a comprehensive study of the automatic detection of abnormal gait using 3D vision, with a focus on non-invasive and practical data acquisition methods suitable for everyday environments. We explore various configurations, including multi-camera setups placed at different distances and angles, as well as performing daily activities in different directions. An integral component of our study involves combining gait analysis with the monitoring of activities of daily living (ADLs), given the paramount relevance of this integration in the context of Ambient Assisted Living. To achieve this, we investigate cutting-edge Deep Neural Network approaches, such as the Temporal Convolutional Network, Gated Recurrent Unit, and Long Short-Term Memory Autoencoder. Additionally, we scrutinize different data representation formats, including Euclidean-based representations, angular adjacency matrices, and rotation matrices. Our system\'s performance evaluation leverages both publicly available datasets and data we collected ourselves while accounting for individual variations and environmental factors. The results underscore the effectiveness of our proposed configurations in accurately classifying abnormal gait, thus shedding light on the optimal setup for non-invasive and efficient data collection.

UNASSIGNED: Dynamic functional connectivity (dFC), which can capture the abnormality of brain activity over time in resting-state functional magnetic resonance imaging (rs-fMRI) data, has a natural advantage in revealing the abnormal mechanism of brain activity in patients with Attention Deficit/Hyperactivity Disorder (ADHD). Several deep learning methods have been proposed to learn dynamic changes from rs-fMRI for FC analysis, and achieved superior performance than those using static FC. However, most existing methods only consider dependencies of two adjacent timestamps, which is limited when the change is related to the course of many timestamps.
UNASSIGNED: In this paper, we propose a novel Temporal Dependence neural Network (TDNet) for FC representation learning and temporal-dependence relationship tracking from rs-fMRI time series for automated ADHD identification. Specifically, we first partition rs-fMRI time series into a sequence of consecutive and non-overlapping segments. For each segment, we design an FC generation module to learn more discriminative representations to construct dynamic FCs. Then, we employ the Temporal Convolutional Network (TCN) to efficiently capture long-range temporal patterns with dilated convolutions, followed by three fully connected layers for disease prediction.
UNASSIGNED: As the results, we found that considering the dynamic characteristics of rs-fMRI time series data is beneficial to obtain better diagnostic performance. In addition, dynamic FC networks generated in a data-driven manner are more informative than those constructed by Pearson correlation coefficients.
UNASSIGNED: We validate the effectiveness of the proposed approach through extensive experiments on the public ADHD-200 database, and the results demonstrate the superiority of the proposed model over state-of-the-art methods in ADHD identification.