Porosity in bulky solvents can be created by the methods of dispersing and dissolving porous hosts or by their chemical adornment. And the ensuing liquids with cavities offer requisite high gas uptakes. Intriguingly, metal-organic cages (MOCs) as discrete nanoporous hosts have been utilized recently as soluble entities to obtain a series of interesting type II porous liquids (PLs). Yet, factors affecting the fabrication of type II PLs have not been disclosed. Herein, three metallocages (NUT-101, ZrT-1-NH2, and ZrT-1) with the same zirconocene nodes but different organic ligands are chosen as porous hosts and a polyethylene-glycol (PEG) linked bis-imidazolium based IL, IL(NTf2), is used as a bulky solvent. It is revealed for the first time that the generation of type II PL depends upon the flexibility of MOCs and the interaction between MOCs and solvent molecules. The maximum solubility is observed with NUT-101 (5%) in IL(NTf2) while ZrT-1-NH2 and ZrT-1 remain least soluble (0.5% and 0.2%). As a result, PL-NUT-101-5% with most intrinsic cavities shows higher CO2 uptake (0.576 mmol g-1) than PL-ZrT-1-NH2-0.5% and PL-ZrT-1-0.2% as well as those reported type II PLs.

The fundamental limitation for pore preservation in a Type III porous liquid (T3PL) is the need for a small aperture from the porous filler to realize size exclusion of a bulky solvent. We present a dual-layer surface weaving strategy that can disregard this limitation and achieve micro- and mesoporous metal-organic framework (MOF)-based T3PLs even with apertures much larger than the solvent molecules. By first weaving a tight network of poly(tert-butyl methacrylate) on the MOF surface, the poly(dimethylsiloxane) (PDMS) solvent can be effectively excluded from the pores while smaller guest molecules such as CO2, C2H4, and H2O can freely access the interior, as confirmed by low-pressure adsorption isotherms. Further application of a PDMS-containing polymer coating helps lower the viscosity of the PL due to increased particle dispersibility. This strategy has resulted in the successful construction of T3PLs with aperture sizes up to 3.1 nm.

Slippery liquid-infused porous surfaces (SLIPS) have received widespread attention in the antifouling field. However, the reduction in antifouling performance caused by lubricant loss limits their application in marine antifouling. Herein, inspired by the skin of a poison dart frog which contains venom glands and mucus, a porous liquid (PL) based on ZIF-8 is prepared as a lubricant and injected into a silicone polyurethane (SPU) matrix to construct a new type of SLIPS for marine antifouling applications: the slippery porous-liquid-infused porous surface (SPIPS). The SPIPS consists of a responsive antifoulant-releasing switch between \"defensive\" and \"offensive\" antifouling modes to intelligently enhance the antifouling effect after lubricant loss. The SPIPS can adjust antifouling performance to meet the antifouling requirements under different light conditions. The wastage of antifoulants is reduced, thereby effectively maintaining the durability and service life of SLIPS materials. The SPIPS exhibits efficient lubricant self-replenishment, self-cleaning, anti-protein, anti-bacterial, anti-algal, and self-healing (97.48%) properties. Furthermore, it shows satisfactory 360-day antifouling performance in actual marine fields during boom seasons, demonstrating the longest antifouling lifespan in the field tests of reported SLIPS coatings. Hence, the SPIPS can effectively promote the development of SLIPS for neritic antifouling.

Porous liquids (PLs), a summation of porous hosts and bulky solvents bestowing permanent cavities, are the prominent emerging materials. Despite great efforts, exploration of porous hosts and bulky solvents is still needed to develop new PL systems. Metal-organic polyhedra (MOPs) with discrete molecular architectures can be considered as porous hosts; however, many of them are insoluble entities. Here we report the transformation of type III PL to type II PLs by tuning the surface rigidity of insoluble MOP, Rh24 L24 , in a bulky ionic liquid (IL). Functionalization of N-donor molecules on Rh-Rh axial sites ensue their solubilization in bulky IL which confer type II PLs. Experimental and theoretical studies reveal the bulkiness of IL as per the cage apertures, and the cause of their dissolution as well. The obtained PLs, capturing more CO2 than neat solvent, have depicted higher catalytic activity for CO2 cycloaddition compared to individual MOPs and IL.

Porous liquids are porous materials that have exhibited unique properties in various fields. Herein, we developed a method to synthesize the type I porous liquids via liquefaction of cyclodextrins by chemical modification. The cyclodextrin porous liquids were characterized by Fourier-transform infrared (FTIR) spectroscopy, NMR, matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS), circular dichroism (CD), and UV-vis spectroscopy. The measured ionic conductivity of the γ-cyclodextrin porous liquid was 500 times as great as that of its reactants, which was found to be the first instance with such great conductivity for a type I porous liquid. What is more, the γ-cyclodextrin porous liquid had been demonstrated experimentally to have outstanding chiral recognition ability toward pyrimidine nucleosides in water, which was further confirmed by computational simulations. Additionally, enantiomeric excess of the extracted nucleoside was achieved up to 84.81% by convenient extraction from the mixture of racemic nucleosides and γ-cyclodextrin porous liquid. The great features of the novel cyclodextrin porous liquids could bring opportunities in many fields, including the preparation of chiral separation materials, development of new drug screening mechanisms, and construction of chiral response materials.

Type II porous liquids are demonstrated to be promise porous materials. However, the category of porous hosts is very limited. Here, a porous host metal-organic polyhedra (MOP-18) is reported to construct type II porous liquids. MOP-18 is dissolved into 15-crown-5 as an individual cage (5 nm). Both the molecular dynamics simulations and experimental gravimetric CO2 solubility test indicate that the inner cavity of MOP-18 in porous liquids is unoccupied by 15-crown-5 and is accessible to CO2 . Thus, the prepared porous liquids show enhanced gas solubility. Furthermore, the prepared porous liquid is encapsulated into graphene oxide (GO) nanoslits to form a GO-supported porous liquid membrane (GO-SPLM). Owing to the empty cavity of MOP-18 unit cages in porous liquids that reduces the gas diffusion barrier, GO-SPLM significantly enhances the permeability of gas.

Solid porous materials, like zeolites, have been widely used in a variety of fields such as size-and-shape-selective absorption/separation and catalysis because of their porosity. However, there are few liquid materials that exhibit permanent porosity. Porous liquids are a novel material that combine the properties of fluidity and permanent porosity. They have potential applications in many fields such as gas separation, storage and transport. Herein, we report a novel Type 1 porous liquid prepared based on silicalite-1. The pore size of this porous liquid was determined by positron annihilation lifetime spectroscopy (PALS), and the CO2 capacities were determined by the intelligent gravimetric analyzer (IGA). The unique properties of this porous liquid can promote its application in many fields such as gas storage and transport.