BACKGROUND: With the continuous improvement of diagnosis and treatment technology for cervical spine-related diseases in children at home and abroad, the demand for exploring the developmental anatomy and function of children\'s cervical spine of different ages is increasing. So the aim of this study was to investigate the changes of anatomical indicators in neurocentral synchondrosis (NCS) of C2-C7 with age and the developmental characteristics of different vertebrae in children aged 1-6 years old.
METHODS: A retrospective collection of 160 cases of normal cervical spine CT images of children aged 1-6 years old in provincial tertiary hospitals, according to the age group of 1-year-old into 6 groups. The original data of continuously scanned cervical spine tomography images were imported into Mimics16.0 software, under the two-dimensional image window, selected the measurement tool under the Measurements toolbar to measure and statistically analyzed the anatomical indicators such as cross diameter, sagittal diameter, height, perimeter and area of NCS in the C2-C7 segment of the cervical spine on the coronal plane and cross-section.
RESULTS: There was no significant difference in the anatomical indexes of cervical spine NCS in children compared with the left and right sides of the same vertebrae (P > 0.05). The same cervical spine generally had differences between the age groups of 1-4 years old and 5-6 years old (P < 0.05).The transverse diameter and circumference gradually decreased with age; the sagittal diameter and height showed a slight increase trend; there was a maximum area at 2 years of age. In different cervical vertebrae of the same age group, the NCS values of C3, C4, and C5 varied greatly, which showed that the ossification process of cervical cartilage was faster than that at the upper and lower ends. There were obvious differences between C2 and the rest of the cervical vertebral segments\' NCS ossification process. C7 was also very different from the rest of the cervical vertebrae segments, presumably more similar to the thoracic spine.
CONCLUSIONS: The anatomical indexes of C2-C7 NCS in children have obvious developmental regularities at different ages, and there are also regularities between cervical segments.

OBJECTIVE: To investigate the anatomical indexes and anatomical positional indexes of the atlantoaxial synchondroses in normal Chinese Han children aged 1-6 years, and to analyze the changing law of the atlantoaxial cartilage union with the growth and development of age and its influence on the atlantoaxial ossification in children.
METHODS: A retrospective collection of CT imaging of 160 cases of normal cervical spine in children aged 1 to 6 years old was conducted. The cases were divided into six age groups, with each group representing a one-year age range. Measure the morphological anatomical indicators and anatomical positional indicators of the atlantoaxial synchondroses. Record and statistically analyze the measurements of each indicator.
RESULTS: Measurements were taken on various parameters of the atlantoaxial synchondroses. TD, SD, height, area, and perimeter all gradually decreased among the groups. Distance between bilateral atlantal anterolateral synchondroses increased gradually from Group A to Group F, while the angle formed along the long axis in the cross-section showed a decreasing trend. Distance between the axoid dentolateral synchondroses and between the neurocentral synchondroses increased gradually from Group A to Group F, with the angle value in the cross-section showing a gradual decrease, and distance from the odontoid apex increasing from Group A to Group F.
CONCLUSIONS: The atlantoaxial synchondroses gradually decrease in size with age, and ossification levels increase with age, with faster ossification occurring during a 1-2 years-old period. The anterolateral synchondroses, dentolateral synchondroses, and neurocentral synchondroses all gradually ossify towards the lateral direction with increasing age.

OBJECTIVE: To digitally measure the fixation trajectory of anatomical plates used in the combined reduction of quadrilateral acetabular fractures via the posterior approach, and to develop anatomical plates that align with the characteristics of the pelvis in the Chinese population.
METHODS: Pelvic computed tomography (CT) data from 102 adult patients were collected at the Affiliated Hospital of Zunyi Medical University. This group included 51 males and 51 females, aged between 20 and 60 years. Using Mimics software (version 21.0), a three-dimensional model of each pelvic data point was reconstructed. The fixation path for the combined reset anatomical steel plate was drawn, where the curves on the fixation path were approximated as arcs. The radius of curvature and length of these curves were measured, and an anatomical steel plate was designed to best fit the pelvic structure.
RESULTS: The combined anatomical reduction plate fixation system for quadrilateral acetabular fractures using a posterior approach consisted of two parts: a locking plate and a reduction plate. The posterior wall region (r2), ischial region (r3), quadrilateral region (r4), and bending region (r5), and the total length of the reduction plate were significantly smaller in females (P < 0.05). Similarly, the posterior wall region (R3), distal posterior wall region (R4), and the total length of the locking plate were significantly smaller in females (P < 0.05). Additionally, the anterior superior iliac spine side (r1) and the total length of the T-shaped auxiliary plate were significantly smaller in females (P < 0.05). The bending angle (< A) was also significantly smaller in females (P < 0.05).
CONCLUSIONS: The pelvic surface structure is irregular and varies greatly among individuals.Compared to the traditional steel plate, The combined reduction anatomical plate designed in this study demonstrated high precision and improved conformity to the anatomical structure of the pelvis.

OBJECTIVE: To quantitatively measure ocular morphological parameters of guinea pig with Python technology.
METHODS: Thirty-six eyeballs of eighteen 3-week-old guinea pigs were measured with keratometer and photographed to obtain the horizontal, coronal, and sagittal planes respectively. The corresponding photo pixels-actual length ratio was acquired by a proportional scale. The edge coordinates were identified artificially by ginput function. Circle and conic curve fitting were applied to fit the contour of the eyeball in the sagittal, coronal and horizontal view. The curvature, curvature radius, eccentricity, tilt angle, corneal diameter, and binocular separation angle were calculated according to the geometric principles. Next, the eyeballs were removed, canny edge detection was applied to identify the contour of eyeball in vitro. The results were compared between in vivo and in vitro.
RESULTS: Regarding the corneal curvature and curvature radius on the horizontal and sagittal planes, no significant differences were observed among results in vivo, in vitro, and the keratometer. The horizontal and vertical binocular separation angles were 130.6°±6.39° and 129.8°±9.58° respectively. For the corneal curvature radius and eccentricity in vivo, significant differences were observed between horizontal and vertical planes.
CONCLUSIONS: The Graphical interface window of Python makes up the deficiency of edge detection, which requires too much definition in Matlab. There are significant differences between guinea pig and human beings, such as exotropic eye position, oblique oval eyeball, and obvious discrepancy of binoculus. This study helps evaluate objectively the ocular morphological parameters of small experimental animals in emmetropization research.

BACKGROUND: In calcaneal fractures, the percutaneous screw fixation (PSF) is currently considered to be the better choice, but it is difficult to accurately place the screw into the sustentaculum tali (ST) during the operation. In this study, the ideal entry point, angle, diameter and length of the screw were calculated by simulating the operation process.
METHODS: We retrospectively collected the calcaneus computed tomography (CT) scans of 180 adults, DICOM-formatted CT-scan images of each patient were imported into Mimics software to establish calcaneus model. Virtual screws were placed on the lateral of the posterior talar articular surface (PTAS), the lateral edge of the anterior process of calcaneus (APC), and the calcaneal tuberosity, respectively, the trajectory and size of the screws were calculated.
RESULTS: The mean maximum diameter of the PTAS screw was 42.20 ± 3.71 mm. The vertical distance between the midpoint of the APC optimal screw trajectory and the lowest point of the tarsal sinus was 10.67 ± 1.84 mm, and the distance between the midpoint of the APC optimal screw trajectory and the calcaneocuboid joint was 5 mm ~ 19.81 ± 2.08 mm. The mean maximum lengths of APC screws was 44.69 ± 4.81 mm, and the Angle between the screw and the coronal plane of the calcaneus from proximal to distal was 4.72°±2.15° to 20.52°±3.77°. The optimal point of the maximum diameter of the calcaneal tuberosity screw was located at the lateral border of the achilles tendon endpoint. The mean maximum diameters of calcaneal tuberosity screws was 4.46 ± 0.85 mm, the mean maximum lengths of screws was 65.31 ± 4.76 mm. We found gender-dependent differences for the mean maximum diameter and the maximum length of the three screws.
CONCLUSIONS: The study provides effective positioning for percutaneous screw fixation of calcaneal fractures. For safer and more efficient screw placement, we suggest individualised preoperative 3D reconstruction simulations. Further biomechanical studies are needed to verify the function of the screw.

OBJECTIVE: To assess the predictive value of baseline digitally measured exposure root surface area (ERSA) on the effectiveness of modified coronally advanced tunnel and de-epithelialized gingival grafting (MCAT + DGG) technique for the treatment of multiple adjacent gingival recessions (MAGRs).
METHODS: A total of 96 gingival recessions (48 RT1 and 48 RT2) from 30 subjects were included. ERSA was measured on the digital model obtained by intraoral scanner. Generalized linear model was used to analyze the possible correlation of ERSA, Cairo recession type (RT), gingival biotype, keratinized gingival width (KTW), tooth type, and cervical step-like morphology on the mean root coverage (MRC) and complete root coverage (CRC) at 1-year after MCAT + DGG. The predictive accuracy of CRC is tested using receiver-operator characteristic curves.
RESULTS: At 1-year postoperatively, the MRC for RT1 was 95.14 ± 10.25%, which was significantly higher than 78.42 ± 22.57% for RT2 (p < 0.001). ERSA (OR:1.342, p < 0.001), KTW (OR:1.902, p = 0.028) and lower incisors (OR:15.716, p = 0.008) were independent risk factors for predicting MRC. ERSA and MRC showed significant negative correlation in RT2(r = -0.558, p < 0.001), but not in RT1(r = 0.220, p = 0.882). Meanwhile, ERSA (OR:1.232, p = 0.005) and Cairo RT (OR:3.740, p = 0.040) were independent risk factors for predicting CRC. For RT2, the area under curve was 0.848 and 0.898 for ERSA without or with other correction factors, respectively.
CONCLUSIONS: Digitally measured ERSA may provide strong predictive values for RT1 and RT2 defects treated with MCAT + DGG.
CONCLUSIONS: This study demonstrates that digitally measured ERSA is a valid outcome predictor for root coverage surgery, especially applicable for predicting RT2 MAGRs.

Background and Objectives: To investigate the digital measurement method for the plate trajectory of dynamic anterior plate-screw system for quadrilateral plate (DAPSQ), and then design a third-generation DAPSQ plate that conforms to the needs of the Chinese population through collating a large sample anatomical data. Materials and Methods: Firstly, the length of the pubic region, quadrilateral region, iliac region, and the total length of the DAPSQ trajectory were measured by a digital measurement approach in 22 complete pelvic specimens. Then, the results were compared with the direct measurement of pelvic specimens to verify the reliability of the digital measurement method. Secondly, 504 cases (834 hemilateral pelvis) of adult pelvic CT images were collected from four medical centers in China. The four DAPSQ trajectory parameters were obtained with the digital measurement method. Finally, the third-generation DAPSQ plate was designed, and its applicability was verified. Results: There was no statistically significant difference in the four trajectory parameters when comparing the direct measurement method with the digital measurement method (p > 0.05). The average lengths of the pubic region, quadrilateral region, iliac region, and the total length in Chinese population were (60.96 ± 5.39) mm, (69.11 ± 5.28) mm, (84.40 ± 6.41) mm, and (214.46 ± 10.15) mm, respectively. Based on the measurement results, six models of the DAPSQ plate including small size (A1,A2), medium size (B1,B2), and the large size (C1,C2) were designed. The verification experiment showed that all these six type plates could meet the requirement of 94.36% cases. Conclusions: A reliable computerized method for measuring irregular pelvic structure was proposed, which not only provided an anatomical basis for the design of the third-generation DAPSQ plate, but also provided a reference for the design of other pelvic fixation devices.

BACKGROUND: The use of external fixators to treat foot and ankle deformities remains a challenge in orthopedic surgery due to their diversity. We hope to improve the automation and accuracy of the correction process.
METHODS: A three-degree-of-freedom (3-DOF) electromotor-driven external fixator for uniplanar foot and ankle deformities was proposed. Computer-assisted correction software was developed to help surgeons use digital technology to measure the required parameters from patients\' X-ray radiographs. The correction trajectory and the prescriptions were generated in the software based on the proposed correction strategy.
RESULTS: Two clinical cases were simulated to verify the correction ability of the developed external fixator. The results showed that the angular and displacement deformities were well corrected.
CONCLUSIONS: The developed external fixator can accurately and automatically correct foot and ankle deformities with the help of computer-assisted correction software, which significantly reduces the burden on surgeons and patients.

To quantitatively assess periodontal soft tissue changes, including gingival thickness and keratinized gingiva width after periodontally accelerated osteogenic orthodontics (PAOO) surgery by digital measurements.  METHODS: This study enrolled 15 maxillaries with 89 anterior teeth and 16 mandibles with 94 anterior teeth from Chinese adult patients with skeletal Angle Class III malocclusion for whom PAOO surgery was proposed during orthodontic treatment. Intraoral scanning and cone beam computed tomography (CBCT) examinations were performed before PAOO surgery and 6 months after the surgery. Keratinized gingiva width was measured on the digital model acquired by intraoral scanning. The gingival thickness was measured using a digital three-dimensional (3D) model based on the combination of digital intraoral scanning and CBCT data.
The mean gingival thickness before surgery was 0.91 ± 0.32 mm and 1.21 ± 0.38 mm at 6-month after PAOO. Patients showed periodontal soft tissue increase with a mean gingival tissue gain of 0.30 ± 0.33 mm. At 1 mm, 2 and 3 mm apical to cemento-enamel junction (CEJ) levels, the gingival thickness increase of the mandible was higher than that of the maxilla (0.38 ± 0.30 mm vs. 0.24 ± 0.31 mm, 0.43 ± 0.35 mm vs. 0.26 ± 0.41 mm, 0.36 ± 0.27 vs. 0.25 ± 0.32 mm, respectively, all P < 0.05). Moreover, the sites of gingival thickness ≤ 1 mm before surgery showed more tissue gain than the sites > 1 mm (0.36 ± 0.32 mm vs. 0.18 ± 0.31 mm, P < 0.001). The mean keratinized gingiva width at T0 was 3.88 ± 1.22 mm, and increased 1.05 ± 1.24 mm 6 months after PAOO surgery. Moreover, a digital 3D model for gingival thickness measurement based on the combination of digital intraoral scanning and CBCT displayed high reliability and accuracy with an intra-class correlation coefficient (ICC) of 0.897.
PAOO could improve an insufficient quantity of periodontal soft and hard tissues in patients with skeletal Angle Class III malocclusion, including the gingival thickness and keratinized gingiva width. A digital 3D model based on the combination of digital intraoral scanning and CBCT data could provide a new digital measurement of gingival thickness with high accuracy and reliability.

UNASSIGNED: Research into biomaterial alternatives to connective tissue grafts (CTG) is a research hotspot. The purpose of this clinical trial was to compare the effectiveness of root coverage through tunnel technique with concentrated growth factor (CGF) vs CTG in treating multiple gingival recessions using digital measurements.
UNASSIGNED: Seventy Cairo Class I multiple gingival recessions (in 28 patients) were treated with either CGF or CTG combined with coronally advanced tunnel technique. Digital models were obtained at baseline, 2 weeks, 6 weeks, and 6 months post-op to compare the gain in gingival height, area, volume, and thickness. Tooth sensitivity, post-operative pain, and healing index were also recorded.
UNASSIGNED: Complete root coverage at 6 months post-op were 47.06% in the CGF group and 77.78% in the CTG groups. Mean root coverages were 80.55% and 96.18%, respectively. No statistical difference was demonstrated between the two groups in terms of gingival area gain at 2 weeks post-op, but the CTG group had greater increases in gingival height, area, volume, and thickness in the period after 2 weeks post-op. Pain scores were statistically significantly lower in the CGF group. At 6 months post-op, sensitivity scores decreased more significantly in the CTG group.
UNASSIGNED: Digital measurements revealed post-operative gingival shrinkage was more pronounced in the CGF group than in the CTG group when combined with coronally advanced tunnel technique. Despite the ease-of-use and minimal post-operative discomfort, it is difficult to achieve similar root coverage outcomes to CTG when using CGF alone in treating multiple gingival recessions.