Mechanical stimulation is prevalent within organisms, and appropriate regulation of such stimulation can significantly enhance cellular functions. Consequently, the in vitro construction and simulation of mechanical stimulation have emerged as a research hotspot in biomechanics. In recent years, a class of artificial muscles named electroactive polymers (EAPs), especially ionic EAPs, have shown promising applications in biomechanics. While several techniques utilizing ionic EAPs for cell mechanical stimulation have been reported, further research is needed to advance and enhance their practical applications. Here, we prepared a microactuator array based on ionic EAP artificial muscles for cell mechanical stimulation. As a preliminary effort, we created a 5 × 5 microactuator array on a supporting membrane by employing laser cutting. We evaluated the electro-actuation performance of the microactuators through experimental testing and numerical simulations, affirming the potential use of the microactuator array for cell mechanical stimulation. The devised approach could inspire innovative design concepts in the development of miniaturized intelligent electronic devices, not only in biomechanics and biomimetics but also in other related fields.

Morphing textiles, crafted using electrochemical artificial muscle yarns, boast features such as adaptive structural flexibility, programmable control, low operating voltage, and minimal thermal effect. However, the progression of these textiles is still impeded by the challenges in the continuous production of these yarn muscles and the necessity for proper structure designs that bypass operation in extensive electrolyte environments. Herein, a meters-long sheath-core structured carbon nanotube (CNT)/nylon composite yarn muscle is continuously prepared. The nylon core not only reduces the consumption of CNTs but also amplifies the surface area for interaction between the CNT yarn and the electrolyte, leading to an enhanced effective actuation volume. When driven electrochemically, the CNT@nylon yarn muscle demonstrates a maximum contractile stroke of 26.4%, a maximum contractile rate of 15.8% s-1, and a maximum power density of 0.37 W g-1, surpassing pure CNT yarn muscles by 1.59, 1.82, and 5.5 times, respectively. By knitting the electrochemical CNT@nylon artificial muscle yarns into a soft fabric that serves as both a soft scaffold and an electrolyte container, we achieved a morphing textile is achieved. This textile can perform programmable multiple motion modes in air such as contraction and sectional bending.

Soft robots have great potential applications in manufacturing, disaster rescue, medical treatment, etc. Artificial muscle is one of the most important components of a soft robot. In previous years, hydrogel actuators that can be controllably deformed by the stimuli of external signals have been developed as good candidates for muscle-like materials. In this article, we successfully prepared a chemical fuel-driven self-resettable bilayer hydrogel actuator mimicking natural muscles with the aid of a new negative feedback reaction network. The actuator can temporarily deform upon the addition of H+ (chemical fuel). Subsequently, H+ accelerated the reaction between BrO3- and Fe(CN)64-, which consume H+. It resulted in the spontaneous recovery of the pH as well as the shape of the actuator. Such an actuator exhibits a great similarity with natural muscles in actuation mechanisms and automaticity in the manipulation compared to the widely reported stimuli-responsive hydrogel actuators. This illustrates that fuel-driven self-resettable hydrogel is a promising dynamic material for mimicking the functions of living creatures.

Inspired by the natural skeletal muscles, this paper presents a novel shape memory alloy-based artificial muscle matrix (AMM) with advantages of a large output force and displacement, flexibility, and compactness. According to the composition of the AMM, we propose a matrix control strategy to achieve independent control of the output force and displacement of the AMM. Based on the kinematics simulation and experiments, we obtained the output displacement and bearing capacity of the smart digital structure (SDS) and confirmed the effectiveness of the matrix control strategy to achieve force and displacement output independently and controllably. A bionic mechanical ankle actuated by AMM was proposed to demonstrate the actuating capability of the AMM. Experimental results show that the angle and force of the bionic mechanical ankle are output independently and have a significant gradient. In addition, by using a self-sensing method (resistance self-feedback) and PD control strategy, the output angle and force of the bionic mechanical ankle can be maintained for a long time without overheating of the AMM.

Artificial muscle is a kind of thread-like actuator that can produce contractile strain, generate force, and output mechanical work under external stimulations to imitate the functions and achieve the performances of biological muscles. It can be used to actuate various bionic soft robots and has broad application prospects. The electrically controlled twisted and coiled polymer (TCP) artificial muscles, with the advantages of high power density, large stroke and low driving voltage, while also being electrolyte free, are the most practical. However, the relationship between the muscle performances and its preparation parameters is not very clear yet, and the complete procedure of designing and preparing TCP muscles according to actual needs has not been established. Besides, current preparation approaches are very time-consuming and cannot make ultra-long TCP muscles. These problems greatly limit wide applications of TCP artificial muscles. In this study, we studied and built the relationship between the actuating performances of TCP muscles and their preparation parameters, so that suitable TCP muscles can be easily designed and prepared according to actual requirements. Moreover, an efficient preparation method integrating one-step annealing technique has been developed to realize on-line performance modulation and continuous fabrication of ultra-long TCP muscles. By graphically assembling long muscles on heat-resist films, we designed and produced a series of fancy soft robots (butterfly, flower, starfish), which can perform various bionic movements and complete specific tasks. This work has achieved efficient on-demand preparation and large-scale assembly of ultra-long TCP muscles, laying solid foundations for their engineering applications in soft robot field.

Soft robotic system, a new era of material science, is rapidly developing with advanced processing technology in soft matters, featured with biomimetic nature. An important bottom-up approach is through the implementation of molecular machines into polymeric materials, however, the synchronized molecular motions, acumination of strain across multiple length-scales, and amplification into macroscopic actuations remained highly challenging. This review presents the significances, key design strategies, and outlook of the hierarchical supramolecular systems of molecular machines to develop novel types of supramolecular-based soft robotic systems.

Nature-similar muscle is one of the ultimate goals of advanced artificial muscle materials. Currently, a variety of chemical and natural materials have been gradually developed for the preparation of artificial muscles. However, due to the scarcity, biological exclusion, and poor flexibility of the abovementioned materials, it is still a challenging process to maximize the imitation of behaviors shown by real muscles and commercial development. Here, this article presents multidimensional wool yarn artificial muscles, and the wet response behavior of fibers is induced in yarn muscles successfully by virtue of weakening the water-repellent effect of wool scales. Wool artificial muscles are cost-effective and widely available and have good biocompatibility. In addition, wool fiber assemblies are structurally stable, soft, and flexible to be processed into artificial muscles with torsional, contractile, and even multilayered structures, enabling various wet-driven behaviors. On the basis of the theoretical model and numerical simulation, we explained and verified the working mechanism employed in wool artificial yarn muscles. Finally, the yarn muscle was integrated into a wool muscle group through the textile technology, followed by the application to robot bionic arms, displaying the great potential of wool artificial yarn muscles in bionic drivers and the intelligent textile industry.

Muscles are capable of modulating the body and adapting to environmental changes with a highly integrated sensing and actuation. Inspired by biological muscles, coiled/twisted fibers are adopted that can convert volume expansion into axial contraction and offer the advantages of flexibility and light weight. However, the sensing-actuation integrated fish line/yarn-based artificial muscles are still barely reported due to the poor actuation-sensing interface with off-the-shelf fibers. We report herein artificial coiled yarn muscles with self-sensing and actuation functions using the commercially available yarns. Via a two-step process, the artificial coiled yarn muscles are proved to obtain enhanced electrical conductivity and durability, which facilitates the long-term application in human-robot interfaces. The resistivity is successfully reduced from 172.39 Ω·cm (first step) to 1.27 Ω·cm (second step). The multimode sense of stretch strain, pressure, and actuation-sensing are analyzed and proved to have good linearity, stability and durability. The muscles could achieve a sensitivity (gauge factor, GF) of the contraction strain perception up to 1.5. We further demonstrate this self-aware artificial coiled yarn muscles could empower non-active objects with actuation and real-time monitoring capabilities without causing damage to the objects. Overall, this work provides a facile and versatile tool in improving the actuation-sensing performances of the artificial coiled yarn muscles and has the potential in building smart and interactive soft actuation systems.

Background: Artificial muscles are an active research area now. Methods: A bibliometric analysis was performed to evaluate the development of artificial muscles based on research papers and patents. A detailed overview of artificial muscles\' scientific and technological innovation was presented from aspects of productive countries/regions, institutions, journals, researchers, highly cited papers, and emerging topics. Results: 1,743 papers and 1,925 patents were identified after retrieval in Science Citation Index-Expanded (SCI-E) and Derwent Innovations Index (DII). The results show that China, the United States, and Japan are leading in the scientific and technological innovation of artificial muscles. The University of Wollongong has the most publications and Spinks is the most productive author in artificial muscle research. Smart Materials and Structures is the journal most productive in this field. Materials science, mechanical and automation, and robotics are the three fields related to artificial muscles most. Types of artificial muscles like pneumatic artificial muscles (PAMs) and dielectric elastomer actuator (DEA) are maturing. Shape memory alloy (SMA), carbon nanotubes (CNTs), graphene, and other novel materials have shown promising applications in this field. Conclusion: Along with the development of new materials and processes, researchers are paying more attention to the performance improvement and cost reduction of artificial muscles.

Human muscles can grow and change their length with body development; therefore, artificial muscles that modulate their morphology according to changing needs are needed. In this paper, we report a strategy to transform an artificial muscle into a new muscle with a different morphology by thermodynamic-twist coupling, and illustrate its structural evolution during actuation. The muscle length can be continuously modulated over a large temperature range, and actuation occurs by continuously changing the temperature. This strategy is applicable to different actuation modes, including tensile elongation, tensile contraction and torsional rotation. This is realized by twist insertion into a fibre to produce torsional stress. Fibre annealing causes partial thermodynamic relaxation of the spiral molecular chains, which serves as internal tethering and inhibits fibre twist release, thus producing a self-supporting artificial muscle that actuates under heating. At a sufficiently high temperature, further relaxation of the spiral molecular chains occurs, resulting in a new muscle with a different length. A structural study provides an understanding of the thermodynamic-twist coupling. This work provides a new design strategy for intelligent materials.