Anthracnose caused by Colletotrichum spp. is a widespread fungal disease that is detrimental to tobacco growth and inflicts economic damage up to 100 million in tobacco-growing regions in China. An early diagnostic tool is vital for the accurate determination and management of anthracnose in the field. This study investigated the diversity of Colletotrichum spp. on tobacco leaves with anthracnose and developed a recombinase polymerase amplification-lateral flow dipstick (RPA-LFD) diagnostic method for the rapid and equipment-independent detection of the main Colletotrichum spp. causing tobacco anthracnose. This assay targeted the chitin synthase gene (chs1) and could be performed in a few minutes (6-10 min). All isolates of C. kastii, C. fructicola and C. gloeosporioides yielded positive results using the RPA-LFD assay, and no cross-reaction occurred with other fungal species from tobacco or other hosts. The detection threshold was 1 pg of genomic DNA under optimal reaction conditions. The entire RPA-LFD assay enabled the detection of pathogen visualization within 30 min without specialized equipment by combining a polyethylene glycol-KOH method for extracting DNA rapidly from tobacco leaves infected with C. kastii, C. fructicola and C. gloeosporioides. Based on these results, the RPA-LFD assay is easy to operate, rapid and equipment independent and is promising for development as a kit to diagnose tobacco anthracnose in resource-limited settings at point-of-care.

Various isothermal amplification methods have been developed for point-of-care testing (POCT) of various infectious diseases. Here, we proposed a novel isothermal amplification method, named as 5\'-half complementary primers mediated isothermal amplification (HCPA). Because of the similarity of our method to the previous method competitive annealing mediated isothermal amplification (CAMP) in primer design, we also use the name CAMP for our method. We demonstrated that CAMP is mediated by both a linear isothermal amplification pattern and a loop-mediated isothermal amplification pattern. To improve the specificity and enable multiplex detection, we further developed HiFi-CAMP method that uses a small amount of high-fidelity DNA polymerase to cut HFman probe to release fluorescent signal. The HiFi-CAMP method was demonstrated to have a good specificity and sensitivity, and fast amplification speed in detection of three human respiratory viruses, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), respiratory syncytial virus A (RSV-A) and influenza A viruses (IAV). When compared with gold standard RT-qPCR assays, the HiFi-CAMP assays showed sensitivities of 90.0 %, 71.4 % and 78.1 %, specificities of 100 %, 100 % and 95.5 %, and consistencies of 93.0 %, 93.3 % and 88.2 % for SARS-CoV-2, RSV-A and IAV, respectively. Furthermore, a duplex HiFi-CAMP assay was also developed to simultaneously detect RSV-A and SARS-CoV-2. The HiFi-CAMP will provide a promising candidate for POCT diagnosis in resource-limited settings.

CRISPR/Cas and Argonaute (Ago) proteins, which target specific nucleic acid sequences, can be applied as diagnostic tools. Despite high specificity and efficiency, achieving sensitive detection often necessitates a preamplification step that involves opening the lid and multistep operation, which may elevate the risk of contamination and prove inadequate for point-of-care testing. Hence, various one-pot detection strategies have been developed that enable preamplification and sensing in a single operation. We outline the challenges of one-pot detection with Cas and Ago proteins, present several main implementation strategies, and discuss future prospects. This review offers comprehensive insights into this vital field and explores potential improvements to detection methods that will be beneficial for human health.

The group B Streptococcus (GBS) can generate vertical transmission to infants during delivery, has been seriously threatening the health of infants. Rapid and accurate prenatal GBS diagnosis for pregnant women is a deterministic blueprint to avoid infant viruses. Here, we developed an extraction-free nucleic acid isothermal amplification/CRISPR-Cas12a cutting one-pot system for GBS diagnostic assay by using suboptimal protospacer adjacent motifs, effectively avoiding multiple handling steps and uncapping contamination. The GBS diagnosis assay based on a one-pot system was validated by using fluorescent technique and lateral flow assay strips, exhibited fantastic specificity, accuracy and sensitivity with a limit of detection of 32 copies per reaction (0.64 copies/μL). Moreover, a portable device was constructed and integrated with the one-pot system to realize the GBS detection without professional and scene restrictions, it showed excellent performance in clinical sample detection, which achieved optical and portable GBS detection for point-of-care testing or home-self testing.

UNASSIGNED: Transmissible gastroenteritis virus (TGEV) is a highly contagious gastrointestinal virus that causes diarrhea, vomiting, anorexia, dehydration, and weight loss in piglets. In clinical practice, it often occurs in mixed infections with other pathogens, and is therefore difficult to diagnose and prevent. It mainly harms piglets of about 2 weeks old, causing huge losses on farms. The clinical confirmation of TGEV usually requires a laboratory diagnosis, but traditional PCR and immunofluorescence assays have some limitations. Moreover, most farms in China are ill-equipped to accurately diagnose the disease. Therefore, a new detection method with high sensitivity and specificity and less dependence on instrumentation is required.
UNASSIGNED: We used recombinase polymerase amplification (RPA), combined with the nuclease characteristics of the activated Cas13a protein to establish a visual CRISPR-Cas13a-assisted detection method for TGEV by adding a reporter RNA with fluorescent and quenching moieties to the system.
UNASSIGNED: We selected the optimal RPA primer and best CRISPR RNA (crRNA). The reaction system was optimized and its repeatability, specificity, and sensitivity verified. The TGEV detection system did not cross-react with other common diarrhea viruses, and its detection limit was 101 copies, which is similar with the sensitivity of qPCR. We successfully established an RPA-CRISPR-Cas13a-assisted detection method, and used this detection system to analyze 123 pig blood samples. qPCR was used as the gold standard method. The sensitivity, specificity, positive coincidence rate, and negative coincidence rate of the new method were 100, 98.93, 96.66, and 100%, respectively.

UNASSIGNED: Accurate detection and identification of pathogens and their associated resistance mechanisms are essential prerequisites for implementing precision medicine in the management of Carbapenem-resistant Enterobacterales (CRE). Among the various resistance mechanisms, the production of KPC carbapenemase is the most prevalent worldwide. Consequently, this study aims to develop a convenient and precise nucleic acid detection platform specifically for the blaKPC gene.
UNASSIGNED: The initial phase of our research methodology involved developing a CRISPR/Cas12a detection framework, which was achieved by designing highly specific single-guide RNAs (sgRNAs) targeting the blaKPC gene. To enhance the sensitivity of this system, we incorporated three distinct amplification techniques-polymerase chain reaction (PCR), loop-mediated isothermal amplification (LAMP), and recombinase polymerase amplification (RPA)-into the CRISPR/Cas12a framework. Subsequently, we conducted a comparative analysis of the sensitivity and specificity of these three amplification methods when used in combination with the CRISPR/Cas12a system. Additionally, we assessed the clinical applicability of the methodologies by evaluating fluorescence readouts from 80 different clinical isolates. Furthermore, we employed lateral flow assay technology to provide a visual representation of the results, facilitating point-of-care testing.
UNASSIGNED: Following a comparative analysis of the sensitivity and specificity of the three methods, we identified the RPA-Cas12a approach as the optimal detection technique. Our findings demonstrated that the limit of detection (LoD) of the RPA-Cas12a platform was 1 aM (~1 copy/µL) for plasmid DNA and 5 × 10³ fg/µL for genomic DNA. Furthermore, both the sensitivity and specificity of the platform achieved 100% upon validation with 80 clinical isolates.
UNASSIGNED: These findings suggest that the developed RPA-Cas12a platform represents a promising tool for the cost-effective, convenient, and accurate detection of the blaKPC gene.

BACKGROUND: Currently, millions of people suffer from undiagnosed chronic hepatitis B (CHB) infection each year, which leads to high mortality rates attributed to cirrhosis and hepatocellular carcinoma. Previously reported assays, such as PCR-based assays, have limitations in terms of convenient for CHB screening in high-burden regions and resource-limited settings. Recently, diagnosis based on CRISPR/Cas, which has been considered as a potential method of point-of-care test (POCT) in resource-limited settings, offers a significant advantage in terms of high sensitivity and specificity. Therefore, there is an urgent need for the hepatitis B virus (HBV) detection utilizing CRISPR/Cas system.
RESULTS: We have proposed a one-pot of one-step method for CRISPR/Cas12b assisted loop-mediated isothermal amplification (LAMP) to facilitate the quick, sensitive, and precise quantification of HBV DNA. This method is designed for point-of-care testing following genomic extraction or sample heat treatment. We have optimized several critical factors, such as the reaction buffer, AapCas12b-gRNA concentration, reporter and its concentration, reaction temperature, and chemical additives, to significantly enhance the performance of the one-pot assay for HBV. Importantly, it exhibited no cross-reactivity between HBV and blood-borne pathogens. Moreover, the assay is capable of quantifying HBV DNA within 1 h with a limit of detection (LOD) of 25 copies per milliliter. Additionally, when tested on 236 clinical samples, the assay demonstrated a sensitivity of 99.00 % (198/200) and a specificity of 100.00 % (36/36) at the 99 % confidence level compared to real-time quantitative PCR.
CONCLUSIONS: The utilization of convenient and reliable point-of-care diagnostic methods is crucial for reducing the burden of CHB globally. The assay we developed was helpful to improve the ability of HBV diagnosis for practical clinical translation, especially in high-burden regions and resource-limited settings. It has great advantages for rapid screening of CHB as well as evaluation of therapeutic efficacy as a companion diagnostic method.

Blastocystis spp. is a ubiquitous protozoon in the intestinal tract of human and many animals. Microscopic examination is the main method of clinical diagnosis for Blastocystis spp., which is prone to false negative. A simple and rapid diagnosis of Blastocystis spp. infection is an important step to prevent and control blastocystosis. Here, a recombinase polymerase amplification-lateral flow dipstick (RPA-LFD) assay was developed for rapid visual detection of Blastocystis spp. DNA amplification could be performed within 18 min at 37°C. The minimum DNA detection limit was 1 pg/μL, and there was no cross-reactivity with 12 other non-target pathogens, which was consistent with the sensitivity of conventional PCR (cPCR). Furthermore, 56 fecal samples from the Third Affiliated Hospital of Xinxiang Medical University were tested using RPA and cPCR methods respectively, and the results were completely consistent. The results show that RPA-LFD method has high accuracy and visual results, which provides a new choice for the differential diagnosis and rapid field detection of Blastocystis spp.

Fluorescence dye-based loop-mediated isothermal amplification (LAMP) is a sensitive nucleic acid detection method, but is limited to single-plex detection and may yield non-specific signals. In this study, we propose a bifunctional probe-based real-time LAMP amplification method for single-plexed or multiplexed detection. The bifunctional probe is derived by modifying the 5\' end of the fluorophore and an internal quencher on one of the LAMP primers; therefore, it can simultaneously be involved in the LAMP process and signal amplification. The fluorescence intensity undergoes a cumulative exponential increase during the incorporation of the bifunctional probe into double-stranded DNA amplicons. The bifunctional probe-based LAMP method is simplified and cost-effective, as the primer design and experimental operations align entirely with the ordinary LAMP. Different from other current probe-based methods, this method does not require additional enzymes, sequences, or special probe structures. Also, it is 10 min faster than several other probe-based LAMP methods. The bifunctional probe-based LAMP method allows the simultaneous detection of the target Vibrio parahaemolyticus DNA and the internal amplification control in a one-pot reaction, demonstrating its potential for multiplexed detection.

Polyethylene glycol modification (PEGylation) is a widely used strategy to improve the physicochemical properties of various macromolecules, especially protein drugs. However, its application in enhancing the performance of enzymes for molecular biology remains underexplored. This study explored the PEGylation of Bst DNA polymerase, determining optimal modification reaction conditions. In comparison to the unmodified wild-type counterpart, the modified Bst DNA polymerase exhibited significantly improved activity, thermal stability, and inhibitor tolerance during loop-mediated isothermal amplification. When applied for the detection of Salmonella in crude samples, the modified enzyme demonstrated a notably accelerated reaction rate. Therefore, PEGylation emerges as a viable strategy for refining DNA polymerases, helping in the development of novel molecular diagnostic reagents.