Background: Manual pressure in the upper cervical spine is used to provoke and reduce the familiar migraine headache. Information is scarce on the segmental levels, myofascial structure provocation, and reduction occurrences. The required dosage (amount of pressure, number of repetitions, and duration) has not been objectified yet. Methods: Prospective observational study. Thirty patients with migraine were examined interictally. Manual pressure was applied at four sites: the posterior arch of C1, the articular pillar of C2, the rectus capitis posterior major muscle, and the obliquus capitis inferior muscle, bilaterally. On sites where the familiar headache was provoked, the pressure was sustained to induce pain reduction (three repetitions). Provocation of familiar headache (yes/no), headache intensity (numerical pain rating scale), time to obtain a reduction of the headache (seconds), and applied pressure (g/cm2) were recorded. Results: Provocation of the familiar headache occurred at the posterior arches C1 in 92%, and at one of the articular pillars of C2 in 65.3% of cases. At one of the rectus capitis major muscles, the familiar headache was provoked in 84.6% of cases; at one of the oblique capitis inferior muscles, the familiar headache was provoked in 76.9% of cases. The applied mean pressure ranged from 0.82 to 1.2 kg/cm2. Maintaining the pressure reduced headache pain intensity significantly between the start and end of each of the three consecutive trials (p < 0.04). This reduction occurred faster in the third application than in the first application (p = 0.03). Conclusion: Manual pressure at upper cervical segments provokes familiar referred migraine headaches, with low manual pressure. Maintaining the pressure reduces the referred head pain significantly, indicating modulation of central nociceptive transmission.

To examine and categorize symptoms occurring within 60 s of vertebrobasilar-insufficiency (VBI) testing (left- and right-neck rotation) in individuals with persistent post-traumatic headache.
As part of routine clinical cervical screening in our patients, we found extended VBI testing often triggered additional symptoms. Therefore, we aimed to document the prevalence and precise symptoms occurring during each movement direction of this test and determine any demographic or baseline signs or symptoms associated with a positive test.
A retrospective medical record review on military personnel receiving treatment for persistent post-traumatic headache was performed. Participants were grouped according to presence of non-headache related symptoms triggered during the tests. Frequency, onset, and symptom characteristics reported were categorized as potentially vascular and/or possible autonomic or cranial nerve in nature.
At least one symptom was reported by 81.3% of 123 patients. Of these, 54% reported symptoms in one and 46% in both directions of rotation, yielding 146 abnormal tests. Most reported symptoms were tear disruption (41%), altered ocular-motor-control (25%), and blepharospasm (16%). Enlisted individuals and those with altered baseline facial sensation were more likely to have a positive test.
The majority reported symptoms not typical of VBI within 60 seconds of sustained neck rotation. Further study is needed to better understand the mechanisms and clinical relevance.

BACKGROUND: This retrospective study aimed to determine the feasibility and efficacy of endoscopy-assisted anterior cervical debridement combined with posterior fixation and fusion in patients with upper cervical spine tuberculosis.
METHODS: Between June 2008 and January 2016, 17 patients (10 men and 7 women) with upper cervical spine tuberculosis underwent endoscopy-assisted anterior cervical debridement combined with posterior fixation and fusion. Anti-tuberculosis treatment was administered for 2-4 weeks preoperatively and 12-18 months postoperatively. The clinical and radiographic data of the patients were analyzed.
RESULTS: The operation was successfully completed in all patients. Neck pain and stiffness were relieved after the surgery in all patients. The mean operation time was 210.0 ± 21.2 min, and the mean intraoperative blood loss was 364.7 ± 49.6 mL. The mean follow-up duration was 68.1 ± 6.7 months. The erythrocyte sedimentation rate returned to normal by 3 months postoperatively. Visual analog scale scores for neck pain were significantly lower postoperatively than preoperatively. All patients had significant postoperative neurological improvement. Patient-reported outcomes, as measured using the Kirkaldy-Willis criteria, were as follows: excellent, 12 patients; good, 4 patients; fair, 1 patient; and poor, 0 patients. Bone fusion was achieved at 10.9 ± 1.9 months after the surgery; no cases of instrument loosening or fracture occurred.
CONCLUSIONS: Endoscopy-assisted anterior cervical debridement combined with posterior fixation and fusion is a feasible and effective surgical method for the treatment of upper cervical spine tuberculosis. It can be used to restore upper cervical spine stability and facilitate spinal healing.

To characterize surgical treatment and outcomes of C1 fractures in a population-based setup.
Patients with C1 fracture treated at Kuopio University Hospital Neurosurgery were retrospectively identified from January 1996 to June 2017. C1 fractures were classified according to the AO Spine Upper Cervical and Gehweiler classification systems. Patients were divided into 4 groups based on their treatment: group 1 (underwent C1 surgery as a primary option), group 2 (underwent C1 surgery as a secondary option after initial nonoperative treatment), group 3 (underwent surgery involving the C1 level with main indication being a concomitant cervical spine fracture), and group 4 (C1 fracture treatment was nonoperative).
We identified 47 patients with C1 fracture (mean age, 60.3 ± 18.2 years; 83.0% men; American Society of Anesthesiologists score, 2.3 ± 0.8). Concomitant cervical spine fractures were present in 89.4% of cases, most commonly in the C2 vertebra (75.4%). In group 2, 3 of 5 fractures changed from AO Spine type A to B in control imaging after nonoperative treatment, indicating fracture instability and requiring secondary surgery. Good C1 fracture alignment was achieved for 10 of 10 followed-up patients in groups 1 and 2, and for 10 of 11 followed-up patients in group 3. Residual neck pain and stiffness were present in all groups. Neurologic symptoms were rare and mild.
For unstable C1 fractures, surgery is safe treatment with good outcomes. Fractures initially determined as stable may require surgery if alignment is worsened in follow-up imaging. Magnetic resonance imaging is recommended to better detect unstable C1 fractures in diagnostic imaging.

To determine the safe screw trajectory for posterior transarticular fixation of C1-C2 without direct visualisation of C2 lateral masses and by using fluoroscopic landmarks only.
Fluoroscopic models of the craniovertebral region in frontal and sagittal planes were reconstructed using 1-mm interval computed tomography scans of the cervical spine in 30 patients. The imitation model of the screw trajectory was then applied with verification of the exact screw localisation using multiplanar reconstruction. Twenty-seven trajectories for 60 oblique C1-C2 reformations were tested.
In the frontal plane, all correct trajectories passed through the medial waistline point (WstP) of C3 and through the middle of the lateral mass of C1. In the lateral plane, the posterior spinal process-lateral mass (SpLM) point-middle C1 anterior tuberculum point (ATP), middle SpLM-upper ATP, and lower SpLM-odontoid point (ODP)-had relatively low rates of vertebral artery (VA) injury (2.3%, 4.6%, and 7%, respectively) and other screw malpositions (6.9%, 4.6%, and 4.6%, respectively). In cases of an isthmus height exceeding 8 mm, there were no incidences of VA injury. Patients with an isthmus width greater than 7 mm had a lower risk of screw malposition.
We identified potentially safe trajectories for percutaneous posterior transarticular fixation of C1-C2. Using SpLM, ATP, and ODP landmarks in the lateral plane, and WstP and C1 middle landmarks in the frontal plane, it is possible to achieve an acceptable screw position without direct visualisation of the C2 lateral mass.

The rotation stress test is a pre-manipulative screening test used to examine upper cervical instability. This in vitro study simulates the clinical application of the rotation stress test before and after alar ligament transection.
After the dissection of the superficial structures to the alar ligament and the fixation of C2, ten cryopreserved upper cervical columns were manually mobilized in right and left rotation without and with right alar ligament transection. Upper cervical rotation range of motion (RoM) and mobilization torque were recorded using the Vicon motion capture system and a load cell.
Ligament transection resulted in a larger rotation range of motion in all specimens (contralateral rotation (3.6°, 12.9%) and ipsilateral rotation (4.6°, 13.7%)). The mobilization torque recorded during rotation varied among the different specimens, with a trend towards reduced torque throughout the test in contralateral rotation.
This study simulated the rotation stress test before and after alar ligament transection. Unilateral transection of the alar ligament revealed a bilateral increase of the upper cervical rotation. Additional in vivo studies are necessary to validate the results of this study in patients with suspicion of upper cervical instability.

Chronic neck pain is one of today\'s most prevalent pathologies. The International Classification of Diseases categorizes four subgroups based on patients\' associated symptoms. However, this classification does not encompass upper cervical spine dysfunction. The aim is to compare the short- and mid-term effectiveness of adding a manual therapy approach to a cervical exercise protocol in patients with chronic neck pain and upper cervical spine dysfunction. Fifty-eight subjects with chronic neck pain and upper cervical spine dysfunction were recruited (29 = Manual therapy + Exercise; 29 = Exercise). Each group received four 20-min sessions, one per week during four consecutive weeks, and a home exercise regime. Upper flexion and flexion-rotation test range of motion, neck disability index, craniocervical flexion test, visual analogue scale, pressure pain threshold, global rating of change scale, and adherence to self-treatment were assessed at the beginning, end of the intervention and at 3- and 6-month follow-ups. The Manual therapy + Exercise group statistically improved short- and medium-term in all variables compared to the Exercise group. Four 20-min sessions of Manual therapy + Exercise along with a home-exercise program is more effective in the short- to mid-term than an exercise protocol and a home-exercise program for patients with chronic neck pain and upper cervical dysfunction.

This study aimed to determine the immediate and short-term effects of a single upper cervical high-velocity, low-amplitude (HVLA) manipulation on standing postural control and cervical mobility in chronic nonspecific neck pain (CNSNP). A double-blinded, randomized placebo-controlled trial was performed. Forty-four patients with CNSNP were allocated to the experimental group (n = 22) or control group (n = 22). All participants were assessed before and immediately after the intervention, with a follow-up on the 7th and 15th days. In each evaluation, we assessed global and specific stabilometric parameters to analyze standing postural balance and performed the cervical flexion-rotation test (CFRT) to analyze upper cervical mobility. We obtained statistically significant differences, with a large effect size, in the limited cervical rotation and global stabilometric parameters. Upper cervical HVLA manipulation produced an improvement in the global stabilometric parameters, significantly decreasing the mean values of velocity, surface, path length, and pressure in all assessments (p < 0.001; ƞ 2 p = 0.323-0.856), as well as significantly decreasing the surface length ratio (L/S) on the 7th (-0.219 1/mm; p = 0.008; 95% confidence interval (CI): 0.042-0.395) and 15th days (-0.447 1/mm; p < 0.001; 95% CI: 0.265-0.629). Limited cervical rotation values increased significantly immediately after manipulation (7.409°; p < 0.001; 95% CI: 6.131-8.687) and were maintained during follow-up (p < 0.001). These results show that a single upper cervical HVLA manipulation produces an improvement in standing postural control and increases the rotational range of motion (ROM) in the upper cervical spine in patients with CNSNP.

The side-bending stress test is a pre-manipulative screening test for assessing upper cervical instability. To our knowledge, there is no study that simulates the clinical application of side bending stress test before and after alar ligament transection with fixation of C2.
To simulate the effect of alar ligament transection in the side bending stress test for an in vitro validation.
In vitro study.
After the dissection of the superficial structures to the alar ligament and the fixation of C2, ten cryopreserved upper cervical spines were manually mobilized in right and left lateral flexion with and without right alar ligament transection. Upper cervical lateral flexion range of motion and mobilization force were measured with the Vicon motion capture system and a load cell respectively.
The right alar ligament transection increased the upper cervical spine (UCS) range of motion (ROM) in both side bendings (1.30°±1.54° and 1.88°±1.51° increase for right and left side bending respectively). As an average, with standardized forces of 2N, 4N and 6N, right alar ligament transection increased both right and left lateral flexion UCS ROM.
This in vitro study simulates the clinical application of the side bending stress test with intact and right transected alar ligament. Unilateral transection of the alar ligament revealed a predominantly bilateral increase in upper cervical side bending and variability in the mobilization force applied during the test.

BACKGROUND: The craniovertebral junction (CVJ) may be affected by several diseases. It is an anatomically complex region, involving the osteoligamentous, vascular, and nervous structures, which makes surgery challenging. In a case of ventral compression, an anterior approach is preferable, although posterior fixation is often required. Anterior transmucosal approaches are associated with high rates of complications. However, decompression and fixation by the use of retropharyngeal extramucosal approaches may be challenging.
OBJECTIVE: To investigate the feasibility of a single-stage, anterior, extramucosal submandibular (SM) approach modification to the CVJ for simultaneous decompression and stabilization.
METHODS: This was a preliminary cadaveric feasibility study on 2 injected specimens. A variation of the SM approach with a short \"boomerang\" incision, microsurgical decompression of the ventral CVJ, and a new hybrid construct for an anterior atlantoaxial stabilization was investigated. The surgical approach, the decompression, and the instrumentation technique have been described. In addition, intraprocedural images and radiographs and also postprocedural computed tomographic images were collected. Furthermore, surgical exposure, working corridors and angles, and decompression grade were measured.
RESULTS: The SM approach provided wide exposure of the ventral CVJ and the possibility for instrumentation and decompression by removing the anterior arch of C1 and the odontoid process.
CONCLUSIONS: A single- stage anterior extramucosal SM approach for decompression and stabilization of the CVJ is feasible and could result in shorter surgical duration, avoiding the complications related to both the transmucosal approach and the prone position, although specific related risks exist. Mechanical investigation of this hybrid system and in vivo studies are needed to confirm our results.