Identifying patients with left ventricular ejection fraction (EF), either reduced [EF < 40% (rEF)], mid-range [EF 40-50% (mEF)], or preserved [EF > 50% (pEF)], is considered of primary clinical importance. An end-to-end video classification using AutoML in Google Vertex AI was applied to echocardiographic recordings. Datasets balanced by majority undersampling, each corresponding to one out of three possible classifications, were obtained from the Standford EchoNet-Dynamic repository. A train-test split of 75/25 was applied. A binary video classification of rEF vs. not rEF demonstrated good performance (test dataset: ROC AUC score 0.939, accuracy 0.863, sensitivity 0.894, specificity 0.831, positive predicting value 0.842). A second binary classification of not pEF vs. pEF was slightly less performing (test dataset: ROC AUC score 0.917, accuracy 0.829, sensitivity 0.761, specificity 0.891, positive predicting value 0.888). A ternary classification was also explored, and lower performance was observed, mainly for the mEF class. A non-AutoML PyTorch implementation in open access confirmed the feasibility of our approach. With this proof of concept, end-to-end video classification based on transfer learning to categorize EF merits consideration for further evaluation in prospective clinical studies.

Breast cancer diagnosis from histopathology images is often time consuming and prone to human error, impacting treatment and prognosis. Deep learning diagnostic methods offer the potential for improved accuracy and efficiency in breast cancer detection and classification. However, they struggle with limited data and subtle variations within and between cancer types. Attention mechanisms provide feature refinement capabilities that have shown promise in overcoming such challenges. To this end, this paper proposes the Efficient Channel Spatial Attention Network (ECSAnet), an architecture built on EfficientNetV2 and augmented with a convolutional block attention module (CBAM) and additional fully connected layers. ECSAnet was fine-tuned using the BreakHis dataset, employing Reinhard stain normalization and image augmentation techniques to minimize overfitting and enhance generalizability. In testing, ECSAnet outperformed AlexNet, DenseNet121, EfficientNetV2-S, InceptionNetV3, ResNet50, and VGG16 in most settings, achieving accuracies of 94.2% at 40×, 92.96% at 100×, 88.41% at 200×, and 89.42% at 400× magnifications. The results highlight the effectiveness of CBAM in improving classification accuracy and the importance of stain normalization for generalizability.

Acute lymphoblastic leukemia, commonly referred to as ALL, is a type of cancer that can affect both the blood and the bone marrow. The process of diagnosis is a difficult one since it often calls for specialist testing, such as blood tests, bone marrow aspiration, and biopsy, all of which are highly time-consuming and expensive. It is essential to obtain an early diagnosis of ALL in order to start therapy in a timely and suitable manner. In recent medical diagnostics, substantial progress has been achieved through the integration of artificial intelligence (AI) and Internet of Things (IoT) devices. Our proposal introduces a new AI-based Internet of Medical Things (IoMT) framework designed to automatically identify leukemia from peripheral blood smear (PBS) images. In this study, we present a novel deep learning-based fusion model to detect ALL types of leukemia. The system seamlessly delivers the diagnostic reports to the centralized database, inclusive of patient-specific devices. After collecting blood samples from the hospital, the PBS images are transmitted to the cloud server through a WiFi-enabled microscopic device. In the cloud server, a new fusion model that is capable of classifying ALL from PBS images is configured. The fusion model is trained using a dataset including 6512 original and segmented images from 89 individuals. Two input channels are used for the purpose of feature extraction in the fusion model. These channels include both the original and the segmented images. VGG16 is responsible for extracting features from the original images, whereas DenseNet-121 is responsible for extracting features from the segmented images. The two output features are merged together, and dense layers are used for the categorization of leukemia. The fusion model that has been suggested obtains an accuracy of 99.89%, a precision of 99.80%, and a recall of 99.72%, which places it in an excellent position for the categorization of leukemia. The proposed model outperformed several state-of-the-art Convolutional Neural Network (CNN) models in terms of performance. Consequently, this proposed model has the potential to save lives and effort. For a more comprehensive simulation of the entire methodology, a web application (Beta Version) has been developed in this study. This application is designed to determine the presence or absence of leukemia in individuals. The findings of this study hold significant potential for application in biomedical research, particularly in enhancing the accuracy of computer-aided leukemia detection.

Internet of Things (IoT) applications and resources are highly vulnerable to flood attacks, including Distributed Denial of Service (DDoS) attacks. These attacks overwhelm the targeted device with numerous network packets, making its resources inaccessible to authorized users. Such attacks may comprise attack references, attack types, sub-categories, host information, malicious scripts, etc. These details assist security professionals in identifying weaknesses, tailoring defense measures, and responding rapidly to possible threats, thereby improving the overall security posture of IoT devices. Developing an intelligent Intrusion Detection System (IDS) is highly complex due to its numerous network features. This study presents an improved IDS for IoT security that employs multimodal big data representation and transfer learning. First, the Packet Capture (PCAP) files are crawled to retrieve the necessary attacks and bytes. Second, Spark-based big data optimization algorithms handle huge volumes of data. Second, a transfer learning approach such as word2vec retrieves semantically-based observed features. Third, an algorithm is developed to convert network bytes into images, and texture features are extracted by configuring an attention-based Residual Network (ResNet). Finally, the trained text and texture features are combined and used as multimodal features to classify various attacks. The proposed method is thoroughly evaluated on three widely used IoT-based datasets: CIC-IoT 2022, CIC-IoT 2023, and Edge-IIoT. The proposed method achieves excellent classification performance, with an accuracy of 98.2%. In addition, we present a game theory-based process to validate the proposed approach formally.

Establishing accurate structure-property linkages and precise phase volume accuracy in 3D microstructure reconstruction of materials remains challenging, particularly with limited samples. This paper presents an optimized method for reconstructing 3D microstructures of various materials, including isotropic and anisotropic types with two and three phases, using convolutional occupancy networks and point clouds from inner layers of the microstructure. The method emphasizes precise phase representation and compatibility with point cloud data. A stage within the Quality of Connection Function (QCF) repetition loop optimizes the weights of the convolutional occupancy networks model to minimize error between the microstructure\'s statistical properties and the reconstructive model. This model successfully reconstructs 3D representations from initial 2D serial images. Comparisons with screened Poisson surface reconstruction and local implicit grid methods demonstrate the model\'s efficacy. The developed model proves suitable for high-quality 3D microstructure reconstruction, aiding in structure-property linkages and finite element analysis.

Protein-peptide interactions (PPepIs) are vital to understanding cellular functions, which can facilitate the design of novel drugs. As an essential component in forming a PPepI, protein-peptide binding sites are the basis for understanding the mechanisms involved in PPepIs. Therefore, accurately identifying protein-peptide binding sites becomes a critical task. The traditional experimental methods for researching these binding sites are labor-intensive and time-consuming, and some computational tools have been invented to supplement it. However, these computational tools have limitations in generality or accuracy due to the need for ligand information, complex feature construction, or their reliance on modeling based on amino acid residues. To deal with the drawbacks of these computational algorithms, we describe a geometric attention-based network for peptide binding site identification (GAPS) in this work. The proposed model utilizes geometric feature engineering to construct atom representations and incorporates multiple attention mechanisms to update relevant biological features. In addition, the transfer learning strategy is implemented for leveraging the protein-protein binding sites information to enhance the protein-peptide binding sites recognition capability, taking into account the common structure and biological bias between proteins and peptides. Consequently, GAPS demonstrates the state-of-the-art performance and excellent robustness in this task. Moreover, our model exhibits exceptional performance across several extended experiments including predicting the apo protein-peptide, protein-cyclic peptide and the AlphaFold-predicted protein-peptide binding sites. These results confirm that the GAPS model is a powerful, versatile, stable method suitable for diverse binding site predictions.

UNASSIGNED: Lung cancer is the second most common cancer and the leading cause of cancer death globally. Low dose computed tomography (LDCT) is the recommended imaging screening tool for the early detection of lung cancer. A fully automated computer-aided detection method for LDCT will greatly improve the existing clinical workflow. Most of the existing methods for lung detection are designed for high-dose CTs (HDCTs), and those methods cannot be directly applied to LDCTs due to domain shifts and inferior quality of LDCT images. In this work, we describe a semi-automated transfer learning-based approach for the early detection of lung nodules using LDCTs.
UNASSIGNED: In this work, we developed an algorithm based on the object detection model, you only look once (YOLO) to detect lung nodules. The YOLO model was first trained on CTs, and the pre-trained weights were used as initial weights during the retraining of the model on LDCTs using a medical-to-medical transfer learning approach. The dataset for this study was from a screening trial consisting of LDCTs acquired from 50 biopsy-confirmed lung cancer patients obtained over 3 consecutive years (T1, T2, and T3). About 60 lung cancer patients\' HDCTs were obtained from a public dataset. The developed model was evaluated using a hold-out test set comprising 15 patient cases (93 slices with cancerous nodules) using precision, specificity, recall, and F1-score. The evaluation metrics were reported patient-wise on a per-year basis and averaged for 3 years. For comparative analysis, the proposed detection model was trained using pre-trained weights from the COCO dataset as the initial weights. A paired t-test and chi-squared test with an alpha value of 0.05 were used for statistical significance testing.
UNASSIGNED: The results were reported by comparing the proposed model developed using HDCT pre-trained weights with COCO pre-trained weights. The former approach versus the latter approach obtained a precision of 0.982 versus 0.93 in detecting cancerous nodules, specificity of 0.923 versus 0.849 in identifying slices with no cancerous nodules, recall of 0.87 versus 0.886, and F1-score of 0.924 versus 0.903. As the nodule progressed, the former approach achieved a precision of 1, specificity of 0.92, and sensitivity of 0.930. The statistical analysis performed in the comparative study resulted in a p -value of 0.0054 for precision and a p -value of 0.00034 for specificity.
UNASSIGNED: In this study, a semi-automated method was developed to detect lung nodules in LDCTs using HDCT pre-trained weights as the initial weights and retraining the model. Further, the results were compared by replacing HDCT pre-trained weights in the above approach with COCO pre-trained weights. The proposed method may identify early lung nodules during the screening program, reduce overdiagnosis and follow-ups due to misdiagnosis in LDCTs, start treatment options in the affected patients, and lower the mortality rate.

OBJECTIVE: Electroencephalography (EEG) is widely recognized as an effective method for detecting fatigue. However, practical applications of EEG for fatigue detection in real-world scenarios are often challenging, particularly in cases involving subjects not included in the training datasets, owing to bio-individual differences and noisy labels. This study aims to develop an effective framework for cross-subject fatigue detection by addressing these challenges.
METHODS: In this study, we propose a novel framework, termed DP-MP, for cross-subject fatigue detection, which utilizes a Domain-Adversarial Neural Network (DANN)-based prototypical representation in conjunction with Mix-up pairwise learning. Our proposed DP-MP framework aims to mitigate the impact of bio-individual differences by encoding fatigue-related semantic structures within EEG signals and exploring shared fatigue prototype features across individuals. Notably, to the best of our knowledge, this work is the first to conceptualize fatigue detection as a pairwise learning task, thereby effectively reducing the interference from noisy labels. Furthermore, we propose the Mix-up pairwise learning (MixPa) approach in the field of fatigue detection, which broadens the advantages of pairwise learning by introducing more diverse and informative relationships among samples.
RESULTS: Cross-subject experiments were conducted on two benchmark databases, SEED-VIG and FTEF, achieving state-of-the-art performance with average accuracies of 88.14% and 97.41%, respectively. These promising results demonstrate our model\'s effectiveness and excellent generalization capability.
CONCLUSIONS: This is the first time EEG-based fatigue detection has been conceptualized as a pairwise learning task, offering a novel perspective to this field. Moreover, our proposed DP-MP framework effectively tackles the challenges of bio-individual differences and noisy labels in the fatigue detection field and demonstrates superior performance. Our work provides valuable insights for future research, promoting the application of brain-computer interfaces for fatigue detection in real-world scenarios. .

Fine-tuning is an important technique in transfer learning that has achieved significant success in tasks that lack training data. However, as it is difficult to extract effective features for single-source domain fine-tuning when the data distribution difference between the source and the target domain is large, we propose a transfer learning framework based on multi-source domain called adaptive multi-source domain collaborative fine-tuning (AMCF) to address this issue. AMCF utilizes multiple source domain models for collaborative fine-tuning, thereby improving the feature extraction capability of model in the target task. Specifically, AMCF employs an adaptive multi-source domain layer selection strategy to customize appropriate layer fine-tuning schemes for the target task among multiple source domain models, aiming to extract more efficient features. Furthermore, a novel multi-source domain collaborative loss function is designed to facilitate the precise extraction of target data features by each source domain model. Simultaneously, it works towards minimizing the output difference among various source domain models, thereby enhancing the adaptability of the source domain model to the target data. In order to validate the effectiveness of AMCF, it is applied to seven public visual classification datasets commonly used in transfer learning, and compared with the most widely used single-source domain fine-tuning methods. Experimental results demonstrate that, in comparison with the existing fine-tuning methods, our method not only enhances the accuracy of feature extraction in the model but also provides precise layer fine-tuning schemes for the target task, thereby significantly improving the fine-tuning performance.

Images and videos containing fake faces are the most common type of digital manipulation. Such content can lead to negative consequences by spreading false information. The use of machine learning algorithms to produce fake face images has made it challenging to distinguish between genuine and fake content. Face manipulations are categorized into four basic groups: entire face synthesis, face identity manipulation (deepfake), facial attribute manipulation and facial expression manipulation. The study utilized lightweight convolutional neural networks to detect fake face images generated by using entire face synthesis and generative adversarial networks. The dataset used in the training process includes 70,000 real images in the FFHQ dataset and 70,000 fake images produced with StyleGAN2 using the FFHQ dataset. 80% of the dataset was used for training and 20% for testing. Initially, the MobileNet, MobileNetV2, EfficientNetB0, and NASNetMobile convolutional neural networks were trained separately for the training process. In the training, the models were pre-trained on ImageNet and reused with transfer learning. As a result of the first trainings EfficientNetB0 algorithm reached the highest accuracy of 93.64%. The EfficientNetB0 algorithm was revised to increase its accuracy rate by adding two dense layers (256 neurons) with ReLU activation, two dropout layers, one flattening layer, one dense layer (128 neurons) with ReLU activation function, and a softmax activation function used for the classification dense layer with two nodes. As a result of this process accuracy rate of 95.48% was achieved with EfficientNetB0 algorithm. Finally, the model that achieved 95.48% accuracy was used to train MobileNet and MobileNetV2 models together using the stacking ensemble learning method, resulting in the highest accuracy rate of 96.44%.