UNASSIGNED: Systematic Review and Meta-Analysis.
UNASSIGNED: There has been an increasing trend in maxillofacial injuries associated with combat trauma. Within the maxillofacial complex, the mandible is the most likely structure to be damaged during combat. The structural deficits as a result can be reconstructed with many options. These include vascularised bone grafts (VBGs), non-vascularised bone grafts (NVBGs), alloplastic implants, reconstruction bars and distraction osteogenesis. This study aimed to determine the common modality and efficacy of mandibular reconstruction in combat trauma-related defects.
UNASSIGNED: A literature search was conducted on Pubmed, Prospero, Dynamed, DARE, EMBASE, COCHRANE and BMJ databases.
UNASSIGNED: A total of six articles met the inclusion criteria identifying 165 patients requiring mandibular reconstruction. Non-vascularised iliac bone graft (n = 137) was the most common method followed by ileac crest bone chips harvest using Dacron urethran osteomesh tray (n = 24) and frontoparietal grafts (n = 4). Meta-analysis of five out of six trials demonstrated an overall success rate of 85% (95% CI 79-90; I2 = 59%). A total of 13% (n = 22) of reconstructions failed either completely or partially and 21% (n = 34) of patients suffered postoperative complications.
UNASSIGNED: NVBGs are a practical, cost-effective and favourable method of war zone management of mandibular defects with success rates comparable to those reported in the civilian literature. However, general trauma principles take precedence to rule out life-threatening injuries. Due consideration of patient factors, surgical factors, and available resources are required in the first-line management of combat-related mandibular defects.

Mandible reconstruction is one of the major challenges that face any maxillofacial surgeon worldwide. Different approaches and methods are used for mandible reconstruction, including pedicle flaps, titanium reconstruction plates, and bone grafts. A free fibular flap is used commonly and is considered the gold standard in mandibular reconstruction with a good success rate. Advantages of the free fibula flap include the long pedicle, flexible skin island, good length of dense cortical bone, consistent bone shape, minimal donor site morbidity, superior union rate, anti-collapse effectiveness, segmental blood supply, the potential for two skin paddles, and ease of harvest with a flap survival rate up to 95%. This current review aims to illustrate the approach for mandibular reconstruction using a vascularized free fibula flap.

Medicine is a rapidly-evolving discipline, with progress picking up pace with each passing decade. This constant evolution results in the introduction of new tools and methods, which in turn occasionally leads to paradigm shifts across the affected medical fields. The following review attempts to showcase how 3D printing has begun to reshape and improve processes across various medical specialties and where it has the potential to make a significant impact. The current state-of-the-art, as well as real-life clinical applications of 3D printing, are reflected in the perspectives of specialists practicing in the selected disciplines, with a focus on pre-procedural planning, simulation (rehearsal) of non-routine procedures, and on medical education and training. A review of the latest multidisciplinary literature on the subject offers a general summary of the advances enabled by 3D printing. Numerous advantages and applications were found, such as gaining better insight into patient-specific anatomy, better pre-operative planning, mock simulated surgeries, simulation-based training and education, development of surgical guides and other tools, patient-specific implants, bioprinted organs or structures, and counseling of patients. It was evident that pre-procedural planning and rehearsing of unusual or difficult procedures and training of medical professionals in these procedures are extremely useful and transformative.

OBJECTIVE: To conduct a systemic review for guidance regarding the application of templates in mandibular reconstruction with vascularised iliac flaps.
METHODS: By searching PubMed, EMBASE and the Cochrane Library and collecting relevant literature, information about the types and accuracy of templates was extracted. Data relating to surgical time were also included for further analysis.
RESULTS: Eight studies were included. The data analysis showed that the accuracy of operations with templates was higher than that of conventional surgery. The mean deviation was between 0.70 and 3.72 mm. The operational time was shortened to 314.4 minutes and the graft ischemic time was reduced to 15.6 to 26.8 minutes. Application of functional or specifically designed templates can improve the accuracy and shorten surgical time.
CONCLUSIONS: Templates can increase the accuracy and efficiency of mandibular reconstruction with vascularised iliac flaps, which will benefit patients\' prognosis and subsequent functional restoration. Further studies should be conducted into application of templates to improve the accuracy of reconstructions.

UNASSIGNED: The aim of the systematic review was to analyze the current clinical evidence concerning the use of tissue engineering as a treatment strategy for reconstruction of segmental defects of the mandible and their clinical outcomes using individual patient data.
UNASSIGNED: A systematic review of the literature was conducted using PubMed and Cochrane Library on May 21, 2019. The eligibility criteria included patients in whom segmental mandibular reconstruction was carried out using tissue engineering as the primary treatment strategy. After screening and checking for eligibility, individual patient data were extracted to the extent it was available. Data extraction included the type of tissue engineering strategy, demographics, and indication for treatment, and outcomes included clinical and radiographic outcome measures, vitality of engineered bone, dental rehabilitation, and patient-reported outcome measures and complications.
UNASSIGNED: Out of a total of 408 articles identified, 44 articles reporting on 285 patients were included, of which 179 patients fulfilled the inclusion criteria. The different tissue engineering treatment strategies could be broadly classified into 5 groups: \"prefabrication,\" \"cell culture,\" \"bone morphogenetic protein (BMP) without autografts,\" \"BMP with autografts,\" and \"scaffolds containing autografts.\" Most included studies were case reports or case series. A wide variety of components were used as scaffolds, cells, and biological substances. There was not a single outcome measure that was both objective and consistently reported, although most studies reported successful outcome.
UNASSIGNED: A wide variety of tissue engineering strategies were used for segmental mandibular reconstruction that could be classified into 5 groups. Due to the low number of treated patients, lack of standardized and consistent reporting outcomes, lack of comparative studies, and low evidence of reported literature, there is insufficient evidence to recommend any particular tissue engineering strategy.

Segmental mandibulectomy impairs health-related quality of life (QoL), by altering speech, mastication, swallowing, and facial aesthetics. Fibula free flap (FFF) used for mandible reconstruction is known to improve outcomes; however, minimal information exists in the literature regarding patient-reported outcomes. We aim to assess how current studies evaluate patient perception following segmental mandibulectomy and FFF mandible reconstruction.
Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, a search was conducted for publications involving FFF mandible reconstruction from 2005 to 2017 using PubMed, Cochrane, EMBASE, Web of Science, and PsychInfo.
Of 2212 articles identified initially, only 7 studies were deemed suitable. Six studies used the University of Washington Quality of Life questionnaire, 3 Oral Health Impact Profile, and 1 used European Organization for Research and Treatment of Cancer Head and Neck (EORTC-H&N35).
There is a paucity of information in published reports on QoL outcomes following mandible reconstruction with FFF. In the era of patient-centered health care, observations warrant attention from researchers for physician-assessed patient-reported measures to factor in QoL expectation during surgical decision-making about the choice of reconstruction.

The principle reconstructive modality for segmental mandibulectomy defects is the osteocutaneous free fibula flap. Preoperative CT angiography has been recommended to assess the quality of arterial inflow to the flap and donor limb. However, the impact of the venous system on flap viability has not been explored.
A retrospective review of all patients undergoing free fibula flap mandible reconstruction was performed at a single tertiary cancer center from 2002 to 2015. Overall complications, including operative reexploration and total flap losses, were evaluated.
One hundred seven patients underwent free fibula flap reconstruction of the mandible. Nine patients underwent multiple free flaps and were excluded from this study. Of the remaining 98 patients, 8 patients required operative exploration for microvascular compromise. All patients were found to have venous thrombosis. There were 3 total flaps losses with a salvage rate of 62.5% and overall flap survival of 96.9%. The size of the vena comitantes in the compromised flaps were significantly larger than those of the remaining patients (4.4 mm vs 3.1 mm; P < .0001). Although the total operative times were similar between the 2 groups (585.2 minutes vs 563.3 minutes), the ischemia time was significantly shorter in those cases that required operative takeback (76.5 minutes vs 104.0 minutes; P < .04).
Venous thrombosis of free fibula flaps is more common than arterial thrombosis. Venous stasis in larger vena comitantes may be a contributing factor to microvascular compromise. Anticoagulation and/or handsewn anastomosis may be beneficial if the veins are larger than 4.0 mm in size.

BACKGROUND: The purpose of this study was to assess the impact of bone harvest length and multiple osteotomies on osteocutaneous radial forearm free flap (RFFF) complication rates.
METHODS: A retrospective chart review was conducted for patients undergoing osteocutaneous RFFF reconstruction during an 8-year period.
RESULTS: One hundred fifty-five osteocutaneous RFFF procedures were performed. Recipient-site flap complications were 18 of 55 (32.7%) when bone harvest length was less than 7 cm and 40 of 100 (40.0%) when it was ≥7 cm. No osteotomies were performed in 69 of 155 cases with a corresponding complication rate of 30.4% (21 of 69). One osteotomy was utilized in 69 of 155 flaps, whereas 17 of 155 required more than 1 osteotomy; complications were experienced in 42% (29 of 69) and 47% (8 of 17) of these cases, respectively.
CONCLUSIONS: Osteocutaneous RFFF complication rates were only slightly higher when the bone length was ≥7 cm or when multiple osteotomies were required.