Three-dimensional printing technologies are becoming increasingly attractive for their versatility; the geometrical customizability and manageability of the final product properties are the key points. This work aims to assess the feasibility of producing radiopaque filaments for fused deposition modeling (FDM), a 3D printing technology, starting with zinc oxide (ZnO) and polylactic acid (PLA) as the raw materials. Indeed, ZnO and PLA are promising materials due to their non-toxic and biocompatible nature. Pellets of PLA and ZnO in the form of nanoparticles were mixed together using ethanol; this homogenous mixture was processed by a commercial extruder, optimizing the process parameters for obtaining mechanically stable samples. Scanning electron microscopy analyses were used to assess, in the extruded samples, the homogenous distribution of the ZnO in the PLA matrix. Moreover, X-ray microtomography revealed a certain homogenous radiopacity; this imaging technique also confirmed the correct distribution of the ZnO in the PLA matrix. Thus, our tests showed that mechanically stable radiopaque filaments, ready for FDM systems, were obtained by homogenously loading the PLA with a maximum ZnO content of 6.5% wt. (nominal). This study produced multiple outcomes. We demonstrated the feasibility of producing radiopaque filaments for additive manufacturing using safe materials. Moreover, each phase of the process is cost-effective and green-oriented; in fact, the homogenous mixture of PLA and ZnO requires only a small amount of ethanol, which evaporates in minutes without any temperature adjustment. Finally, both the extruding and the FDM technologies are the most accessible systems for the additive manufacturing commercial apparatuses.

BACKGROUND: Acinetobacter baumannii resistant strains lead to increased mortality, treatment costs, and an increase in the length of hospitalization. Nowadays, nanoparticles are considered a substitute for antibiotics. This study aimed to determine the MIC of Silver (Ag) and Zinc Oxide (ZnO) Nanoparticles (NPs) on Biofilm-Producing Acinetobacter baumannii and determine the relationship between MIC and frequency of efflux pump genes in cutaneous specimens in Shiraz, Southwest Iran in 2021-2022.
METHODS: In this study, specimens were collected from April 2021 to June 2022 at Namazi and Faqihi Hospitals in Shiraz. Investigation of biofilm production in multidrug resistance (MDR) isolates was done by the microtiter plate method. Synthesized nanoparticles were characterized by UV-vis spectrum, X-ray diffraction (XRD), and electron microscopy. The MIC of AgNPs and ZnONPs for isolates was done using the method described in the CLSI guideline (2018). The antibacterial effect of MIC of NPs on inanimate objects was done by colony counts. The prevalence of efflux pump genes (adeR, adeC, adeA, abeM, adeK, adeI) was also investigated by PCR technique.
RESULTS: The highest ceftriaxone resistance (68%) and lowest colistin resistance (7%) were identified. 57% of isolates were MDR. In addition, 71.9% could produce biofilm and 28.1% of isolates could not produce biofilm. The average size of AgNPs and ZnONPs in the present study is 48 and < 70 nm, respectively. The nanoparticles were spherical. The MIC and the MBC of the ZnONPs were in the range of 125 to 250 µg/mL respectively. Also, for AgNPs, the MIC and the MBC were in the range of 62.5 to 250 µg/ml, respectively. AbeM gene had the highest frequency and the AdeK gene had the lowest frequency. Statistical analysis showed that there is a relationship between the frequency of adeA, adeC, and adeM genes with the MIC of AgNPs and ZnONPs.
CONCLUSIONS: According to the results of the present study, inanimate objects such as scalpels in contact with AgNPs (6000 µg/ml for 240 min) or ZnONPs (5000 µg/ml for 120 min) can be free of biofilm producing Acinetobacter baumannii  with efflux pump genes.

UNASSIGNED: The purpose of this comparative study in vitro was to evaluate the effect of organic and inorganic nanoparticles on colour stability, tear strength and hardness of maxillofacial silicone elastomer at baseline and when subjected to outdoor weathering for 6 months.
UNASSIGNED: A total of 240 specimens were fabricated using M511 platinum silicone which were divided into total 4 groups (n = 60) based on the type of nanoparticles (control, polytetrafuoroethylene [PTFE], titanium dioxide [TiO2], zinc oxide [ZnO]) added and each group was further divided into 3 subgroups (n = 20) for colour, tear strength (TS) and hardness (H) testing. The tests were conducted and data was obtained both before and after outdoor weathering of 6 months.
UNASSIGNED: Minimum colour change after weathering was observed in PTFE group (∆E = 2.23). TiO2 group showed maximum TS (12.01 N/mm) followed by PTFE group (10.85 N/mm) before weathering. After weathering, maximum TS was shown by TiO2 group (12.9 N/mm) and PTFE group (12.54 N/mm). TiO2 group showed maximum hardness (24.15 shore A) before weathering and PTFE group showed maximum hardness (33.43 shore A) after weathering.
UNASSIGNED: Within the limitations of this study, it can be concluded that the addition of polytetrafuoroethylene nanoparticles to the polymer enhances both the optical as well as mechanical properties and can be considered favourable for the extended life of the prosthesis.

In this study, a new composite with combination of chitosan oligosaccharide (COS) and zinc oxide nanoparticles (ZnO NPs), termed Chitosan Oligosaccharide-Zinc Oxide Nanocomposites (COS-ZnO NC), was designed to enhance the quality of tomato fruits during postharvest storage. SEM analysis showed a uniform distribution of COS-ZnO NC films on tomato surfaces, indicating high biocompatibility, while the FTIR spectrum confirmed the interaction of COS and ZnO NPs via hydrogen bonds. The COS-ZnO NC exerts positive effects on post-harvest quality of tomato fruits, including significantly reduced water loss, fewer skin wrinkles, increased sugar-acid ratio, and enhanced vitamin C and carotenoids accumulation. Furthermore, COS-ZnO NC induces transcription of carotenoid biosynthesis genes and promotes carotenoids storage in the chromoplast. These results suggest that the COS-ZnO NC film can significantly improve the quality traits of tomato fruits, and therefore is potential in post-harvest storage of tomato fruits.

Traditional therapies often struggle with specificity and resistance in case of cancer treatments. It is therefore important to investigate new approaches for cancer treatment based on nanotechnology. Zinc oxide nanoparticles (ZnONPs) are known to exhibit anti-cancer properties by inducing oxidative stress, apoptosis, and cell cycle arrest. Methotrexate (MTX) a known anti-folate shows specificity to folate receptors and interrupts healthy functioning of cells. This study proposes the use of previously characterized biocompatible Methotrexate loaded Zinc oxide nanoparticles (MTX-ZnONPs) as a dual action therapeutic strategy against breast cancer cell lines, MCF-7 (MTX-sensitive) and MDA-MB-231 (MTX-resistant). To elucidate the cytotoxicity mechanism of MTX-ZnONPs an in depthIn vitrostudy was carried out.In vitroassays, including cell cycle analysis, apoptosis assay, and western blot analysis to study the protein expression were performed. Results of these assays, further supported the anti-cancer activity of MTX-ZnONPs showing apoptotic and necrotic activity in MCF-7 and MDA-MB-231 cell line respectively.In vivoacute oral toxicity study to identify the LD50in animals revealed no signs of toxicity and mortality up to 550 mg kg-1body weight of animal, significantly higher LD50values than anticipated therapeutic levels and safety of the synthesized nanosystem. The study concludes that MTX-ZnONPs exhibit anti-cancer potential against breast cancer cells offering a promising strategy for overcoming resistance.

Co-exposure soil studies of pollutants are necessary for an appropriate ecological risk assessment. Here, we examined the effects of two-component mixtures of metal oxide nanoparticles (ZnO NPs or goethite NPs) with the insecticide chlorpyrifos (CPF) under laboratory conditions in short-term artificial soil assays using Eisenia andrei earthworms. We characterized NPs and their mixtures by scanning electron microscopy, atomic force microscopy, dynamic light scattering and zeta potential, and evaluated effects on metal accumulation, oxidative stress enzymes, and neurotoxicity related biomarkers in single and combined toxicity assays. Exposure to ZnO NPs increased Zn levels compared to control in single and combined exposure (ZnO NPs + CPF) at 72 h and 7 days, respectively. In contrast, there was no indication of Fe increase in organisms exposed to goethite NPs. One of the most notable effects on oxidative stress biomarkers was produced by single exposure to goethite NPs, showing that the worms were more sensitive to goethite NPs than to ZnO NPs. Acetylcholinesterase and carboxylesterase activities indicated that ZnO NPs alone were not neurotoxic to earthworms, but similar degrees of inhibition were observed after single CPF and ZnO NPs + CPF exposure. Differences between single and combined exposure were found for catalase and superoxide dismutase (goethite NPs) and for glutathione S-transferase (ZnO NPs) activities, mostly at 72 h. These findings suggest a necessity to evaluate mixtures of NPs with co-existing contaminants in soil, and that the nature of metal oxide NPs and exposure time are relevant factors to be considered when assessing combined toxicity, as it may have an impact on ecotoxicological risk assessment.

Introduction Nanotechnology plays a significant role in the biomedical and dental fields, offering numerous benefits to humans. Particularly, nanoparticles synthesised through green methods involving herbal formulations present promising advantages. Zinc oxide nanoparticles (ZnONPs) demonstrate strong antibacterial properties. Utilising treatments incorporating chamomile tea and green tea may potentially reduce toxicity while enhancing antibacterial effectiveness against oral infections. This study aimed to develop a mouthwash containing ZnONPs, followed by an evaluation of both its cytotoxicity and antibacterial effectiveness. Materials and methods This study was conducted at Saveetha Dental College, Saveetha Institute of Medical and Technical Science, Chennai, India. In the synthesis of ZnONPs, a formulation consisting of chamomile tea and green tea was employed. Subsequently, these synthesised nanoparticles were used in the preparation of mouthwash. An antimicrobial test of the produced ZnONPs was carried out using the agar well diffusion technique for oral pathogens. For analysis of cytotoxicity, brine shrimps were used in an assay, and comparisons were made with a commercially available mouthwash. Results The antimicrobial properties were assessed, and the formulated mouthwash demonstrated a zone of inhibition of Staphylococcus aureus (20 mm), Enterococcus faecalis (11 mm), Streptococcus mutans (15 mm) and Candida albicans (13 mm), when the agar well diffusion assay was carried out. Furthermore, the formulated mouthwash exhibited lower cytotoxicity compared to the commercially available mouthwash when cytotoxicity was checked in brine shrimps. Conclusion In our study, the ZnONP synthesis with chamomile tea and green tea showed notable antibacterial and antifungal effects. In addition, lower toxicity was observed compared to the commercially available mouthwash. These findings suggest that mouthwash formulated with green-synthesis ZnONPs could serve as a viable alternative to synthetic mouthwash options. As a result, it is suggested that ZnONPs could be employed in mouthwash formulations at concentrations of 40 µL.

暂无摘要。

The interest in Pickering emulsions is based on the possibility of replacing classical emulsifiers with solid particles. These emulsions are very attractive in the pharmaceutical field for their stability virtues and as a vehicle to deliver active ingredients. The study aimed to analyze the properties of the residual film of the Pickering emulsions on the human skin compared to conventional systems. For this project, three types of solid particles were used: titanium dioxide, zinc oxide and silicon dioxide. All of them are capable of stabilizing the oil/water interface and thus forming totally emulsified systems. To create an emulsion of reference, a classical surfactant was used as an excipient. Complementary systems containing both particles and the emulsifier were also analyzed. Then, a combined approach between physicochemical and biometrological in vivo analysis was employed. The study proved that Pickering emulsions stabilized by the metal oxides were distinct from the reference emulsion in terms of droplet sizes and organization, rheological and textural responses. Consequently, it impacted the properties of the residual film once the product was applied to the skin. The particle-stabilized emulsions formed a hydrophobic film counter to conventional excipients. Also, the Friction parameter (or the roughness of the film) was directly linked to the quantity of the particles used in the formulation and their perception on the skin surface. The use of the particles blurs the glossy effect of the oil phase. Finally, it was observed that the appearance of the residual film was impacted by the type of the particle, namely TiO2 and ZnO particles.

In the current investigation, zinc oxide (ZnO) nanoparticles and Fe-doped ZnO nanoparticles were sustainably synthesized utilizing an extract derived from theRumex dentatusplant through a green synthesis approach. The Scanning electron microscope (SEM), X-ray diffraction (XRD), Energy-dispersive x-ray spectroscopy (EDX), Ultra-violet visible spectroscopy (UV-vis) spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA) techniques were used to examine the compositional, morphological, optical, and thermal properties of both samples. The doping of iron into ZnO NPs has significantly influenced their properties. The analysis firmly established that both ZnO NPs and Fe-doped ZnO NPs have hexagonal wurtzite structures and spherical shapes by XRD and SEM. The EDX analysis suggests that iron atoms have been successfully integrated into the ZnO lattice. The change in color observed during the reaction indicated the formation of nanoparticles. The UV-vis peaks at 364 nm and 314 nm confirmed the presence of ZnO NPs and Fe-doped ZnO NPs, respectively. The band gap of ZnO NPs by Fe dopant displayed a narrowing effect. This indicates that adding iron ions to ZnO NPs offers a control band gap. The thermal study TGA revealed that Fe-doped ZnO NPs remain stable when heated up to 600 °C. The antibacterial efficacy of ZnO NPs and Fe-doped ZnO NPs was evaluated against several bacterial strains. The evaluation is based on the zone of inhibition (ZOI). Both samples exhibited excellent antibacterial properties as compared to conventional pharmaceutical agents. These results suggest that synthesizing nanoparticles through plant-based methods is a promising approach to creating versatile and environmentally friendly biomedical products.