OBJECTIVE: To detect any association between palatally displaced canine (PDC) and nasal septal deviation (NSD), palatal bone thickness and volume, and nasal airway dimensions and volume.
METHODS: A total of 92 patients were included and subdivided into two groups: group 1, unilateral PDCs (44 patients), and group 2, normally erupted canines (NDCs) (48 subjects). The following variables were measured using cone-beam computed tomography: presence and type of NSD, nasal width, inferior conchae, hard palate and nasal septum thickness, maxillary bone and nasal airway volumes.
RESULTS: NSD was detected in 77% and 50% of PDC and NDC subjects, respectively. Within the PDC subjects, significant differences between the displaced and nondisplaced sides were detected. Palate thickness was increased in the canine region and reduced in the molar region. Compared with the control group, PDC subjects had reduced palate thickness and lower nasal airway volume. Two predictors were significant for predicting the odds of PDC occurrence: NSD and maxillary bone volume.
CONCLUSIONS: NSD is more frequent in PDC subjects. PDC subjects have reduced palate thickness and decreased nasal airway volume. In the presence of NSD, the odds of developing PDC increase by 3.35 times, and for each one-unit increase in the maxillary bone volume, the odds of developing PDC decrease by 20%.

The aim of this study was to evaluate the influence of palatal vault morphology and screw length on the accuracy of miniscrew insertion in dynamic computer-assisted surgery (d-CAS).
Twenty-four subjects were allocated into three groups, according to their palatal vault morphology (Group A: medium; Group B: steep/high; Group C: low/flat) and the length of miniscrew used. For each subject, two miniscrews were inserted using a dynamic navigation system. To assess the accuracy of insertion, a postoperative CBCT was performed, and the pre- and post-operative scans were superimposed. Five variables were evaluated: Entry-3D, Entry-2D, Apex-3D, Apex-vertical and angular deviation. Descriptive statistics, Shapiro-wilk, Kruskal-Wallis and Dunn\'s tests were used for the statistical analysis. The level of significance was P ≤ 0.05.
The mean angular deviation values revealed strong discrepancies amongst the groups (Group A:7.11°±5.70°; Group B:13.30°±7.76°; Group C:4.92°±3.15°) and significant differences were found regarding the Apex-3D (P = 0.036) and angular deviations (P = 0.008). A Dunn\'s test revealed differences in angular deviation between the medium and high/steep palate group (P = 0.004), and between low/flat and high/steep palate group (P = 0.01) but did not confirm any significant difference in the Apex-3D parameter (Group A-B P = 0.10; Group B-C, P = 0.053; Group A-C, P = 1.00). No significant differences were found regarding the length of the miniscrews.
Palatal vault morphology is a factor that influences the accuracy of miniscrew insertion in d-CAS. In subjects with steep and high palatal vaults, insertion accuracy is lower when considering the angular deviation value. Miniscrew length does not influence accuracy.
Although computer-guided surgery assists the clinician in preventing damage to nearby anatomical structures, individual anatomical variability is a crucial variable. In subjects with a high/steep palate, greater attention should be paid during the planning phase in order to allow for a wide margin from adjacent anatomical structures to achieve better outcomes.

Rapid maxillary expansion is a common orthodontic procedure to correct maxillary constriction. Assessing the midpalatal suture (MPS) expansion plays a crucial role in treatment planning to determine its effectiveness. The objectives of this preliminary investigation are to demonstrate a proof of concept that the palatal bone underlying the rugae can be clearly imaged by ultrasound (US) and the reconstructed axial view of the US image accurately maps the MPS patency.
An ex-vivo US scanning was conducted on the upper jawbones of two piglet\'s carcasses before and after the creation of bone defects, which simulated the suture opening. The planar images were processed to enhance bone intensity distribution before being orderly stacked to fuse into a volume. Graph-cut segmentation was applied to delineate the palatal bone to generate a bone volume. The accuracy of the reconstructed bone volume and the suture opening was validated by the micro-computed tomography (µCT) data used as the ground truth and compared with cone beam computed tomography (CBCT) data as the clinical standard. Also included in the comparison is the rugae thickness. Correlation and Bland-Altman plots were used to test the agreement between the two methods: US versus µCT/CBCT.
The reconstruction of the US palatal bone volumes was accurate based on surface topography comparison with a mean error of 0.19 mm for pre-defect and 0.15 mm and 0.09 mm for post-defect models of the two samples, respectively when compared with µCT volumes. A strong correlation (R2 ≥ 0.99) in measuring MPS expansion was found between US and µCT/CBCT with MADs of less than 0.05 mm, 0.11 mm and 0.23 mm for US, µCT and CBCT, respectively.
It was possible to axially image the MPS opening and rugae thickness accurately using high-frequency ultrasound.
This study introduces an ionizing radiation-free, low-cost, and portable technique to accurately image a difficult part of oral cavity anatomy. The advantages of conceivable visualization could promise a successful clinical examination of MPS to support the predictable treatment outcome of maxillary transverse deficiency.

暂无摘要。

UNASSIGNED: In post-mortem scenarios, often it is a very difficult process to establish a person\'s identity. Rugae are unique in that they are protected from trauma as they are insulated from heat by tongue and buccal pad of fat unlike fingerprint or lip print that is prone to destruction.
UNASSIGNED: This study was aimed to compare the palatal rugae among people of different races. The sole objectives of the study were to assess the predominant pattern in the selected groups, reliability of rugae pattern in personal identification, to evaluate reliability of sex determination and to compare the total number of rugae on right and left sides of the palate among the males and females.
UNASSIGNED: A total of 90 subjects were enrolled into the study and divided into three groups that are African, Dravidian and Mongoloid population. Shapes of rugae present were analyzed according to the classification given by Kapali et al. (1997) and Thomas & Kotze (1983).
UNASSIGNED: The predominant rugae shape in African and Dravidian population was wavy pattern, whereas Mongoloid race was predominant in curve pattern. African and Dravidian males were predominant in wavy pattern when compared to Mongoloid males where unification type was more predominant.
UNASSIGNED: A statistically significant association between the rugae shape in three populations exists, although subtle yet definite.

OBJECTIVE: Despite sharing the same staging system as oral cavity cancers, upper gingiva and hard palate (UGHP) squamous cell carcinoma (SCC) have several features that make them a different entity. We aimed to analyze oncological outcomes and adverse prognostic factors of UGHP SCC, and assess an alternate T classification specific to UGHP SCC.
METHODS: Retrospective bicentric study including all patients treated by surgery for a UGHP SCC between 2006 and 2021.
RESULTS: We included 123 patients with a median age of 75 years. After a median follow-up of 45 months, the 5-year overall survival (OS), disease-free survival (DFS) and local control (LC) were 57.3%, 52.7% and 74.7%, respectively. Perineural invasion, tumor size, bone invasion, pT classification and pN classification were statistically associated with poorer OS, DFS and LC on univariate analysis. On multivariable analysis, the following variable were statistically associated with a poorer OS: past history of HN radiotherapy (p = 0.018), age > 70 years (p = 0.005), perineural invasions (p = 0.019) and bone invasion (p = 0.030). Median survivals after isolated local recurrence were 17.7 and 3 months in case of surgical and non-surgical treatment, respectively (p = 0.066). The alternate classification allowed better patient distribution among T-categories, however without improving prognostication.
CONCLUSIONS: There is a broad variety of clinical and pathological factors influencing prognosis of SCC of the UGHP. A comprehensive knowledge of their prognostic factors may pave the way towards a specific and more appropriate classification for these tumors.

OBJECTIVE: The palatine bone (PAL) rides over the maxilla (MX) without an end-to-end suture in the bony palate of fetuses. However, changes in the topographical relationship among bones was unknown at and along the pterygopalatomaxillary suture, including the palatine canals.
METHODS: Using sagittal, frontal, and horizontal histological sections of the head from 15 midterm fetuses to 12 near-term fetuses, we depicted the changes in the topographical anatomy of the MX, PAL, and greater palatine nerve (GPN).
RESULTS: In the bony greater palatine canal of these fetuses, the medial and posterior walls facing the GPN were consistently made up of the PAL. At midterm, the entire course of the GPN was embedded in the PAL (six fetuses), or the MX contributed to the lateral wall of the nerve canal (nine). At near-term, the anterior and lateral walls showed individual variations: an MX in the anterior and lateral walls (three fetuses), an anterior MX and a lateral PAL (five), an anterior PAL and a lateral MX (two), and a PAL surrounding the GPN (four).
CONCLUSIONS: These increasing variations suggested that the pterygopalatomaxillary suture was actually growing and that the PAL transiently expanded anteriorly and/or laterally to push the MX in fetuses. The \"usual\" morphology in which the GPN is sandwiched by the MX and PAL is likely established after birth, possibly during adolescence. The driving force of this change may not be produced by the masticatory apparatus. Rather, it might be triggered by the growing maxillary sinus.

The primary goal of palatoplasty is the restoration of normal speech, that can be aimed by, among many procedures, lengthening the palate through the pushback technique; one of its complications is abnormal maxillary growth. The main factor affecting facial growth in CLP patients is believed by many to be the palatoplasty-due to the large scar retraction resulting from some surgical techniques. The non-crosslinked two-layer bioabsorbable collagen matrix Mucograft™ (Geistlich Pharma AG, Wolhusen, Switzerland) is a potential tool to aid in wound closure in a second-intention healing situation.
The objective of this work was to test the use of an acellular dermal matrix (Mucograft®) in an experimental model of Veau-Wardill-Kilner palatoplasty, as a tool to reduce scar retraction of the denuded palatine mucosa.
Twenty-four 3-week-old male Wistar rats were used. The animals were randomly divided into two groups. In the control group, an excision was made with bone exposure in the palate, simulating the defect left in the Veau-Wardill-Kilner palatoplasty. In the intervention group, the same procedure was performed, and the area of denuded palatine bone was treated with a bioabsorbable collagen matrix (Mucograft®). For data collection, 9 weeks after surgery (12 weeks of life), the animals were euthanized by excessive anesthetic dosage. Maxillary growth, macroscopic appearance of the scar, pain, and bleeding were evaluated.
There were significant statistical differences between the groups for palate length growth (7.6 mm + -0.38 mm vs 5.5 mm + -0.36 mm, P = .009) and for palate width growth (1.47 mm + -0.8 mm vs -0.09 mm + -0.55 mm, P = .001), favoring dermal matrix group compared to controls. Whereas for pain and bleeding, there were no differences between the groups.
The use of dermal matrix in rats with an area of bone denudation on the palate increases maxillary length and width growth patterns. Besides, it does not increase pain, bleeding, or post-operative complications.

OBJECTIVE: To examine skeletal morphology and dental arch relationships at 8 years of age following early 2-stage palatoplasty, which consists of soft palate plasty at 1 year of age and hard palate closure at 1.5 years of age, and to compare the results with those of conventional pushback palatoplasty.
METHODS: Retrospective.
METHODS: Single institutional study.
METHODS: Eighty-six patients with nonsyndromic complete unilateral cleft lip and palate (UCLP) were selected.
METHODS: The subjects were divided into 2 groups according to the palatoplasty protocols, as follows: 45 patients, who underwent early 2-stage palatoplasty (ETS group), and 41 patients, who underwent 1-stage pushback palatoplasty (PB group).
METHODS: Skeletal morphology was assessed using lateral cephalometric analysis, and dental arch relationships were examined using the GOSLON yardstick.
RESULTS: Cephalometric analysis revealed that the anterior-posterior length of the maxilla, measured by PTM-A and PTM-ANS, both projected to the nasal floor (NF) plane, was longer in the ETS group than in the PB group (PTM-A/NF, p = .04; PTM-ANS/NF, p = .03, unpaired t-test), although no significant difference was observed in SNA (p = .09, unpaired t-test). Upper posterior facial height was shorter in the ETS group than in the PB group (p = .02, unpaired t). Assessments with the GOSLON yardstick showed that the ETS group presented better dental arch relationships than the PB group (p = 0.04, Mann-Whitney\'s U-test).
CONCLUSIONS: The present results suggested that the ETS protocol reduced the negative effects of palatal surgery on facial development and dental arch relationships in patients with complete UCLP at 8 years of age.

OBJECTIVE: To compare the skeletal and dental effects of different types of rapid maxillary expansion (RME) appliances using cone-beam computed tomography (CBCT).
METHODS: This multi-centre study was conducted with a total of 56 patients. The sample consisted of two groups including the McNamara-Type RME (MNR) group with 30 patients (16 females, 14 males, mean age: 13.38 ± 1.16 years) and Full-Coverage RME (FCR) group with 26 patients (10 females, 16 males, mean age:13.78 ± 1.06 years). Twenty-one parameters were measured on CBCT images including 4 maxillary skeletal, 12 maxillary alveolar, and 5 maxillary dental measurements, and the data were analysed using the SPSS 20.0 software.
RESULTS: The rates of increase in the palatal maxillary width (PMW) (3), PMW(4), and PMW(6) were significantly higher in the MNR group (P < .05). While the rates of increase in the buccal maxillary width (BMW) (3) and BMW(4) were statistically higher in the MNR group, the rate of increase in BMW (6) was higher in the FCR group (P < .05). The increases in HPW (4), HPW (6), PAA4(°), and PAA6(°), which are parameters about hard palate width (HPW) and palatal alveolar angle (PAA), were also significantly higher in the MNR group (P < .05). The increases in PAW (4) and PAW (6), referring to the widths between the palatal root apices were significantly higher in the MNR group (P < .05).The increase in Slope-6(°) was also higher in the MNR group (P < .05).
CONCLUSIONS: Expansion in the palatal region on the alveolar level was higher in MNR than in FCR, while expansion in FCR was the highest in the posterior. In both appliances, there was tipping in the buccal direction in both alveolar bone and teeth, and the rate of this tipping was higher in MNR.