Originating in the early 20th century, ultrasonic testing has found increasingly extensive applications in medicine, industry, and materials science. Achieving both a high signal-to-noise ratio and high efficiency is crucial in ultrasonic testing. The former means an increase in imaging clarity as well as the detection depth, while the latter facilitates a faster refresh of the image. It is difficult to balance these two indicators with a conventional short pulse to excite the probe, so in general handling methods, these two factors have a trade-off. To solve the above problems, coded excitation (CE) can increase the pulse duration and offers great potential to improve the signal-to-noise ratio with equivalent or even higher efficiency. In this paper, we first review the fundamentals of CE, including signal modulation, signal transmission, signal reception, pulse compression, and optimization methods. Then, we introduce the application of CE in different areas of ultrasonic testing, with a focus on industrial bulk wave single-probe detection, industrial guided wave detection, industrial bulk wave phased array detection, and medical phased array imaging. Finally, we point out the advantages as well as a few future directions of CE.

Ultrasonic Testing (UT) has seen increasing application of machine learning (ML) in recent years, promoting higher-level automation and decision-making in flaw detection and classification. Building a generalized training dataset to apply ML in non-destructive evaluation (NDE), and thus UT, is exceptionally difficult since data on pristine and representative flawed specimens are needed. Yet, in most UT test cases flawed specimen data is inherently rare making data coverage the leading problem when applying ML. Common data augmentation (DA) strategies offer limited solutions as they don\'t increase the dataset variance, which can lead to overfitting of the training data. The virtual defect method and the recent application of generative adversarial neural networks (GANs) in UT are sophisticated DA methods targeting to solve this problem. On the other hand, well-established research in modeling ultrasonic wave propagations allows for the generation of synthetic UT training data. In this context, we present a first thematic review to summarize the progress of the last decades on synthetic and augmented UT training data in NDE. Additionally, an overview of methods for synthetic UT data generation and augmentation is presented. Among numerical methods such as finite element, finite difference, and elastodynamic finite integration methods, semi-analytical methods such as general point source synthesis, superposition of Gaussian beams, and the pencil method as well as other UT modeling software are presented and discussed. Likewise, existing DA methods for one- and multidimensional UT data, feature space augmentation, and GANs for augmentation are presented and discussed. The paper closes with an in-detail discussion of the advantages and limitations of existing methods for both synthetic UT training data generation and DA of UT data to aid the decision-making of the reader for the application to specific test cases.

This paper reviews recent advances in sensor technologies for non-destructive testing (NDT) and structural health monitoring (SHM) of civil structures. The article is motivated by the rapid developments in sensor technologies and data analytics leading to ever-advancing systems for assessing and monitoring structures. Conventional and advanced sensor technologies are systematically reviewed and evaluated in the context of providing input parameters for NDT and SHM systems and for their suitability to determine the health state of structures. The presented sensing technologies and monitoring systems are selected based on their capabilities, reliability, maturity, affordability, popularity, ease of use, resilience, and innovation. A significant focus is placed on evaluating the selected technologies and associated data analytics, highlighting limitations, advantages, and disadvantages. The paper presents sensing techniques such as fiber optics, laser vibrometry, acoustic emission, ultrasonics, thermography, drones, microelectromechanical systems (MEMS), magnetostrictive sensors, and next-generation technologies.

Over the recent period, there has been an increasing interest in the use of pulsed infrared thermography (PT) for the non-destructive evaluation of Cultural Heritage (CH). Unlike other techniques that are commonly employed in the same field, PT enables the depth-resolved detection of different kinds of subsurface features, thus providing helpful information for both scholars and restorers. Due to this reason, several research activities are currently underway to further improve the PT effectiveness. In this manuscript, the specific use of PT for the analysis of three different types of CH, namely documentary materials, panel paintings-marquetery, and mosaics, will be reviewed. In the latter case, i.e., mosaics, passive thermography combined with ground penetrating radar (GPR) and digital microscopy (DM) have also been deepened, considering their suitability in the open field. Such items have been selected because they are characterized by quite distinct physical and structural properties and, therefore, different PT (and, in some cases, verification) approaches have been employed for their investigations.

Sensing Technology (ST) plays a key role in Structural Health-Monitoring (SHM) systems. ST focuses on developing sensors, sensory systems, or smart materials that monitor a wide variety of materials\' properties aiming to create smart structures and smart materials, using Embedded Sensors (ESs), and enabling continuous and permanent measurements of their structural integrity. The integration of ESs is limited to the processing technology used to embed the sensor due to its high-temperature sensitivity and the possibility of damage during its insertion into the structure. In addition, the technological process selection is dependent on the base material\'s composition, which comprises either metallic or composite parts. The selection of smart sensors or the technology underlying them is fundamental to the monitoring mode. This paper presents a critical review of the fundaments and applications of sensing technologies for SHM systems employing ESs, focusing on their actual developments and innovation, as well as analysing the challenges that these technologies present, in order to build a path that allows for a connected world through distributed measurement systems.

With the aim of increasing the efficiency of maintenance and fuel usage in airplanes, structural health monitoring (SHM) of critical composite structures is increasingly expected and required. The optimized usage of this concept is subject of intensive work in the framework of the EU COST Action CA18203 \"Optimising Design for Inspection\" (ODIN). In this context, a thorough review of a broad range of energy harvesting (EH) technologies to be potentially used as power sources for the acoustic emission and guided wave propagation sensors of the considered SHM systems, as well as for the respective data elaboration and wireless communication modules, is provided in this work. EH devices based on the usage of kinetic energy, thermal gradients, solar radiation, airflow, and other viable energy sources, proposed so far in the literature, are thus described with a critical review of the respective specific power levels, of their potential placement on airplanes, as well as the consequently necessary power management architectures. The guidelines provided for the selection of the most appropriate EH and power management technologies create the preconditions to develop a new class of autonomous sensor nodes for the in-process, non-destructive SHM of airplane components.