OBJECTIVE: The aim of the present research was to assess the mesiodistal angulation of the maxillary anterior teeth utilizing Image J computer software, a Profile projector, and a Custom-made jig.
METHODS: A total of 34 subjects (17 males and 17 females) were chosen from a group of 18-30 years old with bilateral Angle Class I molars and canine relationships. One manual approach (Custom-made jig) and two digital methods (J computer software, a Profile projector) were used to record the mesiodistal angulation in incisal view. The individuals had alginate impressions made, and a facebow was used to capture the maxilla\'s spatial relationship with the cranium. The articulated cast with the help of mounting ring moved to the specially customized jig, then the angulations was measured in the incisal view after the casts were placed in a semi-adjustable articulator. Data were recorded and statistically analyzed.
RESULTS: The mesiodistal angulation in the incisal view via three methods between the 17 males and 17 females has statistically significant different. Although the mesiodistal angulation for maxillary lateral incisor and canine did not show any statistically significant difference, the maximum and minimum values obtained were always greater in males in comparison with the females. This indicates that the positions of six maxillary anterior teeth in the males resulted in the creation of upward sweep of incisal edges of central and lateral incisors which was also referred to as \"smiling line\" producing masculine surface anatomy more squared and vigorous while feminine surface anatomy being more rounded, soft, and pleasant. There was no statistically significant difference between the right and left sides, indicating bilateral arch symmetry and the symmetrical place of the right teeth compared with the left side\'s corresponding teeth.
CONCLUSIONS: On conclusion, according to the current study\'s findings, all three approaches can measure the mesiodistal angulations of maxillary anterior teeth in incisal view with clinically acceptable accuracy. The digital methods, which included using the Image J computer software and the profile projector, achieved more accurate results than the manual method.
CONCLUSIONS: The outcomes of this study\'s mesiodistal angulations can be used as a reference for placing teeth in both fully and partially edentulous conditions. This study contributes to a better understanding of the importance of achieving the ideal occlusion in the Indian population by placing the maxillary anterior teeth at the proper mesiodistal angulation. How to cite this article: Shadaksharappa SH, Lahiri B, Kamath AG, et al. Evaluation of Mesiodistal Angulation of Maxillary Anterior Teeth in Incisal View Using Manual and Digital Methods: An In Vivo Study. J Contemp Dent Pract 2024;25(4):320-325.

OBJECTIVE: To estimate the age of an individual based on 3D radiographic evaluation of pulp width of maxillary central incisor.
METHODS: This study included 185 CBCT images of individuals within age range of 14-64 years. Images were evaluated for maxillary central incisors and pulp width measurements were taken from cementoenamel junction and middle third of root. Obtained data was subjected to correlation and regression analysis from which the age of an individual was predicted. Results of the present study were compared with another study by the same authors.
RESULTS: A negative linear relationship was obtained between age and pulp width. The standard error of estimate (SEE) in sagittal section was 11.36 years and that in coronal section was 11.23 years. The coefficient of determination for sagittal section was 0.107 and for coronal section was 0.127. An obtained regression formula was highly significant. Division of samples into various age groups reduced SEE drastically.
CONCLUSIONS: It can be concluded that pulp width of maxillary central incisor is a reliable indicator of age estimation.

OBJECTIVE: Altering the position and orientation of the root canal access cavity passway, or modifying the reduction of dentin volume, can influence the strength of dentition. This study aimed to compare the effects of different access cavities on the biomechanical performances of maxillary central incisors with a finite element analysis.
METHODS: Based on the micro-computed tomography (CT) scan of a maxillary central incisor, the finite element models of the intact tooth and teeth with 4 access cavity designs: conservative incisal access cavity, incisal access cavity, conservative access cavity, and traditional access cavity were generated. Simulated occlusal forces were applied at the incisal edge of the incisor in the finite element analysis procedure.
RESULTS: The maximum von Mises stress and maximum principal stress in the cervical area are highest in the traditional access cavity group, followed by the conservative access cavity group, incisal access cavity group, and conservative incisal access cavity group.
CONCLUSIONS: The conservative access cavities minimise the extent of dentin removal from the cervical region, protecting the mechanical behaviour of the incisor. Moving the access cavity entry point to the incisal edge also improves the fracture resistance of the incisor.
CONCLUSIONS: This study\'s findings would help clinicians select the most appropriate endodontics access cavity method when performing the root canal on maxillary central incisors.

The size and shape of a tooth vary between individuals of different ethnic groups and genders because of the influence of different genetic factors. The information regarding the different anatomical factors using maxillary anterior teeth is very scanty. Thus to give more clarity, a study was planned to assess the correlation between head circumference and tooth-mesiodistal width among children of different ethnic origins.The study was carried out on 210 children aged 7 to 12 years in schools at Abha, Saudi Arabia.The mesiodistal (MD) width of the central incisor was measured using a digital vernier caliper. A Meter tape ruler was used to measure the Head/Cephalic dimensions. The data obtained were subjected to statistical analysis using IBM SPSS 20.0, and the results were analyzed. It was found that mean MD tooth width and head circumference were maximum in Saudi children, followed by South Asian and Arab/African, with an insignificant statistical difference (p-value > 0.05). Correlation between MD dimensions of maxillary central incisor with head circumference was statistically significant (p-value < 0.05) among Saudi and South Asian populations, whereas statistically insignificant (p-value > 0.05) difference between Saudi and Arab/African populations. It was concluded that there exist the ethnic differences between tooth-mesiodistal width and head circumference dimensions of children. A positive correlation between head circumference and mesiodistal width of the central incisor was determined.

UNASSIGNED: The aim of this study was to determine the average dentin wall thickness (DWT) of the maxillary central incisor (MCI) required for performing finite element analysis (FEA) models of root development.
UNASSIGNED: A total of 137 intraoral periapical radiographs of MCI in children aged 7 to 11 years were examined and then classified into 5 groups according to root development stages, which included 1/2 of root development (S1), 3/4 of root development (S2), more than 3/4 of root development (S3), complete development with wide-open apex (S4) and complete development with closed apex (S5). DWT was measured at three reference (horizontal) lines: at a distance of 1 mm from the apex (M), 4 mm from the apex (L) and at the cervical line (K). The distal dentin wall thickness (M1, L1, and K1), the pulp thickness (M2, L2, and K2), the mesial dentin wall thickness (M3, L3, and K3), and the apex thickness (N) were measured using the diagnostic software Soredex Scanora 5.1.2.4. Statistical analysis compared the values of the parameters K, L, and M between developmental stages (multivariate ANOVA) and the linear correlations between the parameters (Pearson\'s correlation analysis). All analyses were performed at significance level α = 0.05.
UNASSIGNED: There were statistically significant differences between the developmental stages for parameters L and M, while no significant differences were found for parameter K. Most of the correlations between the parameters were statistically significant, with the values of the Pearson correlation coefficient R > 0.6 considered practically significant. All parameters on the same reference line for distal and mesial dentin wall thickness and for pulp thickness correlated well with each other (R = 0.46 - 0.68), but there was no statistically significant correlation with total root thickness on the same reference line (parameters K, L, or M), except for parameter K3 (R = 0.42).
UNASSIGNED: Despite the limitations of this study, the mean values of the selected parameters for the 5 groups of developmental stages of the maxillary central incisor could be used to model dentin wall thickness using finite element analysis.

OBJECTIVE: The aim of this study was to evaluate and compare the most common shades of maxillary central incisor, canine and first molar and to confirm the shade difference between maxillary central incisor and canine in a young population of 18-25 years.
METHODS: The shade of the maxillary central incisor, canine, and first molar of 100 study participants in a young population between 18 and 25 years were measured by digital spectrophotometer (VITA Easyshade). The shade of each tooth was assessed thrice with a digital spectrophotometer at the center of the tooth. Statistical analysis was performed; Chi-squared test was applied to assess the difference in shades.
RESULTS: For the age-group of 18-25 years, the most common shade of maxillary central incisor is A1 and for canine and first molar the most common shade is B3. A highly statistically significant difference (p < 0.001) was observed between teeth, suggesting a definitive shade difference between teeth.
CONCLUSIONS: A definitive shade difference exists between the maxillary central incisor and the canine, with the canine being darker in shade than the central incisor. This result can be implied clinically while restoring maxillary anterior teeth to yield a better esthetic outcome.
CONCLUSIONS: This study reveals that there is a definitive shade difference between the Anterior teeth which should be considered while smile designing to replicate the natural appearance in a patient. Using a digital spectrometer makes the process of shade selection objective thereby eliminating any subjective variations.

BACKGROUND: Failure of eruption of the maxillary permanent incisor teeth usually presents in the mixed dentition between the ages of 7 and 9 years. Missing and unerupted maxillary incisors can be regarded as unattractive and have a potentially negative impact on facial and dental aesthetics. The presence of a supernumerary tooth (or odontoma) is commonly responsible for failed eruption or impaction of the permanent maxillary incisors. The primary objective of this trial is to investigate the success of eruption associated with maxillary incisor teeth that have failed to erupt because of a supernumerary tooth in the anterior maxilla.
METHODS: This protocol describes an interventional multicentre two-arm randomised clinical trial. Participants meeting the eligibility criteria will be randomised (unrestricted equal participant allocation [1:1]) to either space creation with an orthodontic appliance, removal of the supernumerary tooth and application of direct orthodontic traction or space creation with an orthodontic appliance, removal of the supernumerary tooth and monitoring. The primary outcome of this trial is to determine the prevalence of successfully erupted maxillary central permanent incisors at 6 months following removal of the supernumerary tooth. Secondary outcome measures include (1) the effect of initial tooth position (assessed radiographically) on time taken for the tooth to erupt, (2) time taken to align the unerupted tooth to the correct occlusal position, (3) gingival aesthetics and (4) changes in the self-reported Oral Health Related-Quality of Life (OHRQoL) (pre-and post-treatment).
CONCLUSIONS: There is a lack of high-quality robust prospective studies comparing the effectiveness of interventions to manage this condition. Furthermore, the UK national clinical guidelines have highlighted a lack of definitive treatment protocols for the management of children who present with an unerupted maxillary incisor due to the presence of a supernumerary tooth. The results of this trial will inform future treatment guidelines for the management of this condition in young children.
BACKGROUND: ISRCTN Registry ISRCTN12709966 . Registered on 16 June 2022.

Canine relationship is a key reference identifying anterior malocclusion and an important implication for evaluating preimplantation bone morphology at maxillary esthetic zone. This study aimed to compare the differences of maxillary central incisor-related measurements (alveolar bone thickness and tooth sagittal angulation) between Class I and Class III canine relationship and further explore the risk factors for immediate implant placement in the anterior maxilla based on cone beam computed tomography (CBCT) data.
CBCT digital imaging and communications in medicine (DICOM) files of 107 patients (54 with Class I canine relationship and 53 with Class III canine relationship) were collected and the alveolar bone thickness at mid-root (mid-root buccal thickness/MBT; palatal/MPT), apical regions (apical buccal thickness/ABT; palatal/APT) and sagittal angulation (SA) of the maxillary central incisor at the examined side were measured on the mid-sagittal observation plane. Descriptive statistical analysis and frequency distributions of the measurements based on Class I or Class III canine relationship were established. Statistical analyses were performed using Fisher\'s exact test, independent samples t test and Pearson correlation test with the significance level set at p < 0.05.
The frequency distributions of maxillary central incisors\' MPT, ABT, APT and SA showed significant differences between Class I and Class III canine relationships (p = 0.030, 0.024, 0.000 and 0.000, respectively). MPT (2.48 ± 0.88 mm vs. 3.01 ± 1.04 mm, p = 0.005), APT (6.79 ± 1.65 mm vs. 8.47 ± 1.93 mm, p = 0.000) and SA (12.23 ± 5.62° vs. 16.42 ± 4.49°, p = 0.000) were significantly smaller in patients with Class III canine relationship. Moreover, SA showed a strong positive correlation with APT (R = 0.723, p = 0.000) and a moderate negative correlation with ABT (R = - 0.554, p = 0.000).
In populations with Class III canine relationship, maxillary central incisors were significantly more labially inclined and have a thinner palatal bone plate at the apex compared with Class I relationship. Clinicians should avoid palatal perforation during immediate implantation at sites of originally protrusive maxillary incisors.

UNASSIGNED: This study aims to investigate the prevalence of palatogingival groove (PG) in anterior maxillary teeth in an Indian cohort using cone beam computed tomography (CBCT) scans.
UNASSIGNED: Retrospective study.
UNASSIGNED: Analysis of 119 CBCT scans (64 males, 55 females, and mean age 31.6 ± 13.5 years) was performed. The data of 636 anterior maxillary teeth (220 canine, 212 lateral incisor, and 204 central incisor teeth) were studied for PG\'s presence. Demographic details of patients and characteristics of PG, i.e., location, extension, depth, and type were recorded.
UNASSIGNED: Out of the 636 anterior maxillary teeth studied, PGs were detected in 12 (1.88%) teeth (3 [1.47%] central incisors, 9 [4.2%] lateral incisors, and 0 canines). All the teeth were categorized as having either type I (Seven teeth) or type II (Five teeth) radicular groove. Two of the 12 PGs were present in the mesial, six in the mid-palatal, and four were present in the distal portion of the palatal surface of the teeth.
UNASSIGNED: The prevalence of PG in maxillary incisors in this Indian cohort is 2.88%. Maxillary lateral incisors are the most affected teeth.

OBJECTIVE: To evaluate the shade reproduction of a pressable all-ceramic system placed on unstained and stained extracted maxillary central incisor using a color measurement spectrophotometer. In addition, to compare shade reproduction of this material with low translucency and medium opacity on unstained tooth and medium and high opacity on stained tooth.
METHODS: Total 45 discs, with difference in the opacity of core, were used. After spectrophotometric evaluation, shade reproduction of the discs was compared and calculated by formula: Δ E* = ([Δ L*](2)+ [Δ a*](2)+ [Δ b*](2))(1/2).
RESULTS: Student\'s t-test showed that in a sample of 15, the values of Δ E* for Group I - LT (Us.T.) lie between 0 and l, for Group II - MO (for Us. as well as S.T.) between l and 2, for Group III - HO (S.T.) are all above 5. Comparison among groups after t-test showed that mean Δ E* values of Group I - LT is less than Group II - MO for the unstained tooth, Δ E* for Group II - MO is less than average Δ E* value of Group III - HO for stained tooth.
CONCLUSIONS: All-ceramic with low translucency can be used for the fabrication of restoration on the unstained tooth as it gives the best shade reproduction. The medium opacity material may be used on the unstained as well as on stained tooth. However, the clinical implication of high opacity is limited when applied over the stained tooth as it is giving a shade reproduction, which is not within acceptable limits.