BACKGROUND: Forensic age estimation is a procedure which utilises many methods to estimate the age of both living and deceased individuals, including those who have died in natural disasters or man-made catastrophes. The pattern and closure of spheno-occipital synchondrosis (SOS) fusion, along with subchondral ossification of the mandibular condyle, can be used to estimate age.
OBJECTIVE: This study aims to estimate age using computed tomographic (CT) images of spheno-occipital synchondrosis fusion (SOS) and mandibular condylar cortication (MCC), and to correlate these findings with chronological age.
METHODS: The present study included 435 CT images of individuals aged 10-25 years. SOS fusion was assessed using a four-stage system, and MCC was assessed bilaterally using a three-stage system on the sagittal plane. Data on fusion stages and cortication types were entered along with chronological age, and then statistically analysed.
RESULTS: SOS fusion stage 2 occurred at similar age in males (19.82 ± 2.67 years) and females (19.23 ± 2.93 years). Earlier fusion of other stages was observed in females by a mean age of 2 years. MCC was completed 1 year earlier in females, with statistically significant differences (p ≤ 0.001). When comparing cortication types and different fusion stages, only type II cortication showed statistically significant differences compared to different fusion stages (p ≤ 0.001).
CONCLUSIONS: Mandibular condylar cortication (MCC) and spheno-occipital synchondrosis (SOS) fusion were positively correlated with chronological age, suggesting that these parameters can be used as an adjunct method for age estimation.

UNASSIGNED: This study aimed to report the complication rate associated with open reduction and internal fixation (ORIF) of mandibular condyle fractures in Oman.
UNASSIGNED: This retrospective cohort study was conducted among patients who underwent ORIF of mandibular condyle fractures at Al-Nahdha Hospital and the Sultan Qaboos University Hospital in Muscat, Oman, from January 2008 to December 2020. Data collected included patient demographics, fracture aetiology, fracture side and type, surgical approach and recorded complications and outcomes.
UNASSIGNED: A total of 68 patients (59 males and 9 females; mean age of 30.1 years) with 83 mandibular condyle fractures underwent ORIF during the study period. Subcondylar fractures were the most common type, occurring in 62.7% of patients, while bilateral fractures were observed in 21 (30.8%) patients. The most common surgical approach was retromandibular, used in 42.2% of patients. The overall complication rate was 42.6%, with the most frequently reported complications being transient facial nerve palsy (18.1%), malocclusion (14.7%) and restricted mouth opening (10.3%). Subsequent surgical interventions to correct malocclusion were performed in 6 cases. There was no statistically significant association between the overall complication rate and the patients\' clinical characteristics.
UNASSIGNED: Although ORIF of mandibular condyle fractures generally offers favourable outcomes, it carries a risk of complications.

OBJECTIVE: In orthognatic surgery, one of the primary determinants for reliable three-dimensional virtual surgery planning (3D VSP) and an accurate transfer of 3D VSP to the patient in the operation room is the condylar seating. Incorrectly seated condyles would primarily affect the accuracy of maxillary-first bimaxillary osteotomies as the maxillary repositioning is dependent on the positioning of the mandible in the cone-beam computed tomography (CBCT) scan. This study aimed to develop and validate a novel tool by utilizing a deep learning algorithm that automatically evaluates the condylar seating based on CBCT images as a proof of concept.
METHODS: As a reference, 60 CBCT scans (120 condyles) were labeled. The automatic assessment of condylar seating included three main parts: segmentation module, ray-casting, and feed-forward neural network (FFNN). The AI-based algorithm was trained and tested using fivefold cross validation. The method\'s performance was evaluated by comparing the labeled ground truth with the model predictions on the validation dataset.
RESULTS: The model achieved an accuracy of 0.80, positive predictive value of 0.61, negative predictive value of 0.9 and F1-score of 0.71. The sensitivity and specificity of the model was 0.86 and 0.78, respectively. The mean AUC over all folds was 0.87.
CONCLUSIONS: The innovative integration of multi-step segmentation, ray-casting and a FFNN demonstrated to be a viable approach for automating condylar seating assessment and have obtained encouraging results.
CONCLUSIONS: Automated condylar seating assessment using deep learning may improve orthognathic surgery, preventing errors and enhancing patient outcomes in maxillary-first bimaxillary osteotomies.

BACKGROUND: TMJ morphology/position and trabecular structure are influenced by various factors. The role of the interincisal angle, an indicator of the anterior occlusal relationship, on TMJ remains unclear. This study aims to investigate the morphology, trabecular bone structure, and position of the condyle, as well as the glenoid fossa\'s morphology in skeletal class II populations with different interincisal angles.
METHODS: A total of 150 adult patients with normodivergent facial types and skeletal class II malocclusions were selected and divided into three groups based on their interincisal angles: normal, small, and large angle groups. The indexes of TMJ were measured using cone-beam computed tomography (CBCT) data and analyzed using Dolphin Imaging, Mimics, and ImageJ.
RESULTS: The small angle group had the smallest anteroposterior diameter (APD), while the large angle group had a greater mediolateral diameter (MLD). The large angle group exhibited significantly the largest maximum axial area, bone surface area, and bone volume (P < 0.05). Small and large angle groups exhibited greater bone trabeculae (Tb. N) and thinner trabecular thickness (Tb. Th). Compared to the normal angle group, the small angle group exhibited a larger horizontal condylar angle and smaller bilateral condylar angles on the axial plane, while the large angle group showed the opposite trend. Small and large angle groups showed a reduced vertical condyle angle on the coronal plane, with the largest reduction observed in the large angle group (P < 0.05). Small and large angle groups had higher heights of the glenoid fossa (GFH). The large angle group exhibited the greatest GFH and width of the glenoid fossa (GFW) (P < 0.05).
CONCLUSIONS: The large angle group had elongated oval and large condyles, and deeper glenoid fossae, while a flattened-oval and smaller condyle, and wider and shallower glenoid fossae were observed in the small angle group. Small and large interincisal angle affects the structure of condylar trabeculae, resulting in thinner Tb. Th and greater Th. N. In the condylar position, small and large angle groups exhibit condylar rotation in the axial and coronal planes. Therefore, the interincisal angle affects the morphology, position, and trabecular structure of the TMJ. This implies that we must pay attention to the impact of the interincisal angle on TMJ, and it is crucial to restore the normal interincisal angle during orthodontic treatment.

The objective of this study was to compile the currently available evidence regarding the functional and morphologic outcomes of functional orthodontic therapy for mandibular condyle fracture. We performed searches in PubMed and Google Scholar as well as manually (IOK issues 2008-2019) using the keywords \"trauma\", \"TMJ\", \"activator\", \"condylar fracture\", \"fracture\", \"mandibular condylar fracture\", \"occlusal splint\" and \"functional appliance\". Screening and analysis of study eligibility were performed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). The search strategy identified 198 studies published between 1971 and 2018, with 93 studies remaining after removing duplicate hits. Of the 93 studies, 19 were included in this study, considering the inclusion criteria. There were 12 follow-up, 4 prospective, and 3 purely retrospective studies. Some of the studies showed good functional results of mandibular condyle fracture treatment, in addition to subjective patient satisfaction. The incisal edge difference could be increased to physiological ranges of >35 mm by means of activator therapy. Partial mandibular deviations to the fractured side remained post-therapy, especially after unilateral fractures. Fractures without significant dislocation and luxation showed radiographic changes in shape, described as hypoplastic and ellipsoid, in addition to good morphologic results. One study found that collum length shortened twofold after a luxated fracture compared with fractures without significant dislocation, despite activator therapy. Straightening of the fragment occurred only in the low-dislocated fragments. Overall, children showed a higher remodeling potential than adult patients. Several studies observed an improved clinical outcome for functional therapy after mandibular condyle fracture. The outcome is essentially determined by fracture type, fracture height, and age. Further studies, especially prospective studies, are necessary to improve the evidence of functional orthodontic therapy for mandibular condyle fractures.

BACKGROUND: Patients presenting with partially impacted lower third molars (M3) have a higher likelihood of experiencing angle fractures while simultaneously decreasing the risk of condylar fractures. However, the specific biomechanical mechanism responsible for this occurrence remains unclear. Moreover, there is an ongoing debate regarding whether the removal of M3s might actually increase the risk of condylar fractures. This study aimed to evaluate how the presence of M3s influences mandibular fractures resulting from blows to the symphysis and lateral mandibular body, and to determine the indication for extracting M3s in such cases.
METHODS: Models of the mandible with a partially M3-impacted model (M3I), M3-extracted model (M3E), and M3-absent model (M3A) were generated using a computer. A traumatic blown force of 2000 N was applied to the symphysis and the right body of the mandible. Von Mises and principal stresses were analyzed, and failure indexes were determined. Two cases of mandibular linear fractures were chosen for model verification and interpretation.
RESULTS: When force was applied to the symphysis, the condylar region exhibited the highest stress levels, while stress in the mandibular angle region was much less regardless of the M3 state. On applying the force to the right mandibular body, stress in the condylar region decreased while stress in the mandibular body increased, especially in the blown regions. Impacted tooth or cavity formation post-M3 extraction led to uneven stress distribution on the blown side of the mandible, increasing the risk of mandibular angle fractures. In cases where M3 was absent or the extraction socket had healed, stress from lateral traumatic blown force was evenly distributed along both the inner and outer oblique lines of the mandible, thereby reducing the risk of mandibular fractures.
CONCLUSIONS: The reduced risk of condylar fractures in patients with partially impacted lower M3s and mandibular angle fractures is mainly due to lateral blows on the mandible, which generate less stress in the condylar region than blows on the mandibular symphysis, rather than being caused by the M3 itself. Extraction of the lower M3 can decrease the risk of mandibular fractures, with a minor influence on condylar fractures.

Temporomandibular joint disorders are prevalent causes of orofacial discomfort. Diagnosis predominantly relies on assessing the configuration and positions of temporomandibular joint components in magnetic resonance images. The complex anatomy of the temporomandibular joint, coupled with the variability in magnetic resonance image quality, often hinders an accurate diagnosis. To surmount this challenge, we developed deep learning models tailored to the automatic segmentation of temporomandibular joint components, including the temporal bone, disc, and condyle. These models underwent rigorous training and validation utilizing a dataset of 3693 magnetic resonance images from 542 patients. Upon evaluation, our ensemble model, which combines five individual models, yielded average Dice similarity coefficients of 0.867, 0.733, 0.904, and 0.952 for the temporal bone, disc, condyle, and background class during internal testing. In the external validation, the average Dice similarity coefficients values for the temporal bone, disc, condyle, and background were 0.720, 0.604, 0.800, and 0.869, respectively. When applied in a clinical setting, these artificial intelligence-augmented tools enhanced the diagnostic accuracy of physicians, especially when discerning between temporomandibular joint anterior disc displacement and osteoarthritis. In essence, automated temporomandibular joint segmentation by our deep learning approach, stands as a promising aid in refining temporomandibular joint disorders diagnosis and treatment strategies.

Agenesis of the temporomandibular condyle is a congenital/developmental disorder that can present with the absence of the condyle and an incomplete development of the articular fossa and eminence, resulting in facial asymmetry as well as masticatory dysfunction. The purpose of this report is to present the case of a three-year-old girl with absence of the left temporomandibular condyle. The patient presented with pain and dysfunction in the left masseter muscle, pre-auricular area and ear as well as mild chin deviation to the left. The most common treatment modality is to wait and treat this condition with surgical intervention once the patient is grown. However, oral orthopedic appliances can be considered to promote bone formation prior to surgery. Prompt recognition and early treatment is advisable to take advantage of the child\'s growth and avoid further facial asymmetry, pain and dysfunction.

OBJECTIVE: This systematic review aims to summarize and synthesize the evidence that investigates the secondary effects of the application of botulinum toxin (BT) into the masticatory muscles and its effects on bone density.
METHODS: Database searches were conducted until March 19th, 2024. The quality of the studies was assessed by the Cochrane tool risk of bias for the randomized controlled trials and the ROBINS-I tool for non-randomized studies. The Cochrane Grading of Recommendations Assessment Development and Evaluation (GRADE) was used to evaluate the confidence in the overall evidence.
RESULTS: Five studies looking at the effects of botulinum toxin on bone density and resorption when applied to masticatory muscles were found. No significant changes were observed in most of the studies when looking at the effects of botulinum toxin on mandibular condyle volume, density, mandibular angle thickness, and coronoid process volume. The only finding that was statistically and clinically relevant was the difference between patients who received a double application of BT when compared with patients who received a single application (SMD: -0.99 [95%CI: -1.94,-0.05]) on the volume of the mandibular angle.
CONCLUSIONS: There is no clear pattern on whether the application of botulinum toxin is associated with bone resorption or not. Although some studies show statistical significance of the findings, the magnitude of the changes in bone density and their clinical significance are not completely clear.
CONCLUSIONS: To understand the effectiveness of the use of botulinum toxin into the masticatory muscles and its possible secondary adverse effects on the density of the mandible.

The objectives of this study were to compare the chondrogenic potential of cells derived from different layers of Mandibular condyle cartilage and to gain further understanding of the impact of chondrogenic cues when embedded into a novel hydrogel scaffold (PGH, a polymer blend of poly (ethylene glycol), gelatin, and heparin) compared to a gelatin hydrogel scaffold (GEL). Cartilage layer cells (CLCs) and fibroblastic superficial layer cells (SLCs) were harvested from the mandibular condyle of boer goats obtained from a local abattoir. After expansion, cells were seeded into PGH and GEL hydrogels and cultured in chondrogenic media for 3 weeks. Scaffolds were harvested at 0, 1, and 3 week(s) and processed for gross appearance, histochemical, biochemical, and mechanical assays. In terms of chondrogenesis, major differences were observed between scaffold materials, but not cell types. Glycosaminoglycan (GAG) staining showed GEL scaffolds deposited GAG during the 3 week period, which was also confirmed with the biochemical testing. Moreover, GEL scaffolds had significantly higher compressive modulus and peak stress than PGH scaffolds at all time points with the largest difference seen in week 3. It can be concluded that GEL outperformed PGH in chondrogenesis. It can also be concluded that materials play a more important role in the process of chondrogenesis than the tested cell populations. Fibroblastic SLCs were shown to have similar chondrogenic potential as CLCs cells, suggesting a rich pool of progenitor cells in the superficial fibroblastic layer capable of undergoing chondrogenesis given appropriate physical and chemical cues.