UNASSIGNED: This article presents a strategy that a Drug Delivery Device Developer (DDDD) has adopted to support Abbreviated New Drug Application (ANDA) submissions of drug-device combination products. As per the related FDA guidance, a threshold analysis should be compiled. If \'other differences\' between the Reference Listed Drug (RLD) and the generic drug devices are identified, a Comparative Use Human Factors (CUHF) study may be requested.
UNASSIGNED: The DDDD performed task analysis and physical comparison to assess the pen injector design differences. Then, a formative CUHF study with 25 participants simulating injections using both RLD and the generic pen injectors was conducted.
UNASSIGNED: After each participant completed four simulated injections, similar type and rates of use error between the RLD (0.70) and generic (0.68) pen injectors were observed.
UNASSIGNED: DDDDs can support pharmaceutical companies in the ANDA submission strategy of their drug-device combination product by initiating comparative task analysis and physical comparison of the device as inputs for the threshold analysis. If \'other differences\' are identified, a formative CUHF study can be performed. As shown in our case study, this approach can be leveraged to support the sample size calculation and non-inferiority margin determination for a CUHF study with the final combination product.

The development of bone-filling biomaterials capable of delivering in situ bone growth promoters or therapeutic agents is a key area of research. We previously developed a biomaterial constituting biphasic calcium phosphate (BCP) microparticles embedded in an autologous blood or plasma clot, which induced bone-like tissue formation in ectopic sites and mature bone formation in orthotopic sites, in small and large animals. More recently, we showed that activated carbon (AC) fiber cloth is a biocompatible material that can be used, due to its multiscale porosity, as therapeutic drug delivery system. The present work aimed first to assess the feasibility of preparing calibrated AC microparticles, and second to investigate the properties of a BCP/AC microparticle combination embedded in a plasma clot. We show here, for the first time, after subcutaneous (SC) implantation in mice, that the addition of AC microparticles to a BCP/plasma clot does not impair bone-like tissue formation and has a beneficial effect on the vascularization of the newly formed tissue. Our results also confirm, in this SC model, the ability of AC in particle form to adsorb and deliver large molecules at an implantation site. Altogether, these results demonstrate the feasibility of using this BCP/AC/plasma clot composite for bone reconstruction and drug delivery.

Patients with rheumatoid arthritis (RA) often have one or more painfuljoints despite adequate medicine. Local drug delivery to the synovial cavity bids for high drug concentration with minimal systemic adverse effects. However, anti-RA drugs show short half-lives in inflamed joints after intra-articular delivery. To improve the therapeutic efficacy, it is essential to ensure that a drug is only released from the formulation when it is needed. In this work, we developed an intelligent \"Self-actuating\" drug delivery system where Disease-modifying anti-rheumatic Drug (DMARD) methotrexate is incorporated within a matrix intended to be injected directly into joints. This formulation has the property to sense the need and release medication only when joints are inflamed in response to inflammatory enzyme Matrix metalloproteinases (MMP). These enzymes are important proteases in RA pathology, and several MMP are present in augmented levels in synovial fluid and tissues. A high level of MMP present in synovial tissues of RA patients would facilitate the release of drugs in response and ascertain controlled drug release. The formulation is designed to be stable within the joint environment, but to dis-assemble in response to inflammation. The synthesized enzyme-responsive methotrexate (Mtx) encapsulated micron-sized polymer-lipid hybrid hydrogel microspheres (Mtx-PLHM) was physiochemically characterized and tested in synovial fluid, Human Fibroblast like synoviocytes (h-FLS) (derived from RA patients) and a rat arthritic animal model. Mtx-PLHM can self-actuate and augment the release of Mtx drug upon contact with either exogenously added MMP or endogenous MMP present in the synovial fluid of patients with RA. The drug release from the prepared formulation is significantly amplified to several folds in the presence of MMP-2 and MMP-9 enzymes. In the rat arthritic model, Mtx-PLHM showed promising therapeutic results with the significant alleviation of RA symptoms through decrease in joint inflammation, swelling, bone erosion, and joint damage examined by X-ray analysis, histopathology and immune-histology. This drug delivery system would be nontoxic as it releases more drug only during the period of exacerbation of inflammation. This will simultaneously protect patients from unwanted side effects when the disease is inactive and lower the need for repeated joint injections.

UNASSIGNED: Endodontic treatment involves the removal of infected dental pulp and subsequent disinfection of the root canal system. The effectiveness of drug delivery systems in root canal disinfection is critical for successful treatment outcomes. This in vitro study explores the potential of nanoparticles as a novel drug delivery system for endodontic treatment.
UNASSIGNED: Nanoparticles were synthesized using a biocompatible polymer and loaded with an antimicrobial agent. A total of 60 extracted human teeth were prepared to create standardized root canal infections. The teeth were randomly divided into three experimental groups: (1) conventional irrigation, (2) nanoparticle irrigation, and (3) control (no irrigation). The root canals in each group were irrigated with their respective solutions for 5 minutes. After treatment, microbial samples were collected from the root canals and cultured for colony-forming unit (CFU) analysis. The depth of penetration of nanoparticles into dentinal tubules was assessed using scanning electron microscopy (SEM).
UNASSIGNED: The conventional irrigation group showed a reduction in microbial load from an average of 7.8 × 10^5 CFU/mL (SD ± 1.2 × 10^5) to 3.4 × 10^4 CFU/mL (SD ± 7.9 × 10^3) (P < 0.001). In contrast, the nanoparticle irrigation group exhibited a more significant reduction, with a decrease in CFU to 1.2 × 10^3 CFU/mL (SD ± 4.2 × 10^2) (P < 0.001). SEM analysis revealed deep penetration of nanoparticles into dentinal tubules, reaching an average depth of 150 μm.
UNASSIGNED: Nanoparticles loaded with antimicrobial agents demonstrated superior efficacy in reducing microbial load within root canals compared to conventional irrigation. Their ability to penetrate dentinal tubules suggests their potential as an innovative drug delivery system for endodontic treatment. Further research and clinical trials are warranted to validate these promising in vitro results and assess the safety and efficacy of nanoparticles in clinical practice.

Bacterial corneal keratitis is a damage to the corneal tissue that if not treated, can cause various complications like severe vision loss or even blindness. Combination therapy with two antibiotics which are effective against Gram-positive and Gram-negative bacteria offers sufficient broad-spectrum antibiotic coverage for the treatment of keratitis. Nanofibers can be a potential carrier in dual drug delivery due to their structural characteristics, specific surface area and high porosity. In order to achieve a sustained delivery of amikacin (AMK) and vancomycin (VAN), the current study designed, assessed, and compared nanofibrous inserts utilizing polyvinyl alcohol (PVA) and polycaprolactone (PCL) as biocompatible polymers. Electrospinning method was utilized to prepare two different formulations, PVA-VAN/AMK and PCL/PVA-VAN/AMK, with 351.8 ± 53.59 nm and 383.85 ± 49 nm diameters, respectively. The nanofibers were simply inserted in the cul-de-sac as a noninvasive approach for in vivo studies. The data obtained from the physicochemical and mechanical properties studies confirmed the suitability of the formulations. Antimicrobial investigations showed the antibacterial properties of synthesized nanofibers against Staphylococcus aureus and Pseudomonas aeruginosa. Both in vitro and animal studies demonstrated sustained drug release of the prepared nanofibers for 120 h. Based on the in vivo findings, the prepared nanofibers\' AUC0-120 was found to be 20 to 31 times greater than the VAN and AMK solutions. Considering the results, the nanofibrous inserts can be utilized as an effective and safe system in drug delivery.

OBJECTIVE: To evaluate the safety and intraocular pressure (IOP)-lowering efficacy of 2 models of the travoprost intraocular implant (fast-eluting [FE] and slow-eluting [SE] types) from 1 of 2 phase 3 trials (the GC-010 trial).
METHODS: Multicenter, randomized, double-masked, sham-controlled, noninferiority trial.
METHODS: Patients with open-angle glaucoma or ocular hypertension having an unmedicated baseline mean diurnal IOP (average of 8 am, 10 am, and 4 pm time points) of ≥ 21 mmHg, and IOP of ≤ 36 mmHg at each of the 8 am, 10 am, and 4 pm timepoints at baseline.
METHODS: Study eyes were randomized to the travoprost intraocular implant (FE implant [n = 200] or SE implant [n = 197] model) or to timolol ophthalmic solution 0.5% twice daily (n = 193).
METHODS: The primary outcome was mean change from baseline IOP in the study eye at 8 am and 10 am, at each of day 10, week 6, and month 3. Safety outcomes included adverse events (AEs) and ophthalmic assessments.
RESULTS: Mean IOP reduction from baseline over the 6 time points ranged from 6.6 to 8.4 mmHg for the FE implant group, from 6.6 to 8.5 mmHg for the SE implant group, and from 6.5 to 7.7 mmHg for the timolol group. The primary efficacy end point was met; the upper limit of the 95% confidence interval of the difference between the implant groups and the timolol group was < 1 mmHg at all 6 time points. Study eye AEs, most of mild or moderate severity, were reported in 21.5%, 27.2%, and 10.8% of patients in the FE implant, SE implant, and timolol groups, respectively. The most common AEs included iritis (FE implant, 0.5%; SE implant, 5.1%), ocular hyperemia (FE implant, 3.0%; SE implant, 2.6%), reduced visual acuity (FE implant, 1.0%; SE implant, 4.1%; timolol, 0.5%), and IOP increased (FE implant, 3.5%; SE implant, 2.6%; timolol, 2.1%). One serious study eye AE occurred (endophthalmitis).
CONCLUSIONS: The travoprost intraocular implant demonstrated robust IOP reduction over the 3-month primary efficacy evaluation period after a single administration. The IOP-lowering efficacy in both implant groups was statistically and clinically noninferior to that in the timolol group, with a favorable safety profile.
BACKGROUND: Proprietary or commercial disclosure may be found in the Footnotes and Disclosures at the end of this article.

OBJECTIVE: The aims of this study were to design a novel titanium surface coated with a PVA hydrogel matrix and chitosan-based nanoparticles and to investigate the antibiotic release and its ability to inhibit microbial activity.
METHODS: Two drug delivery systems were developed and mixed. Chitosan-based nanoparticles (NP) and a polyvinyl alcohol film (PVA). The size, ζ-potential, stability, adhesive properties, and encapsulation profile of NP, as well as the release kinetics of drug delivery systems and their antimicrobial ability of PVA and PVANP films, were studied on Ti surfaces. The systems were loaded with doxycycline, vancomycin, and doxepin hydrochloride.
RESULTS: Nanoparticles presented a ζ-potential greater than 30 mV for 45 days and the efficiency drug encapsulation was 26.88% ± 1.51% for doxycycline, 16.09% ± 10.24% for vancomycin and 17.57% ± 11.08% for doxepin. In addition, PVA films were loaded with 125 μg/mL of doxycycline, 125 μg/mL of vancomycin, and 100 μg/mL of doxepin. PVANP-doxycycline achieved the antibacterial effect at 4 h while PVA-doxycycline maintained its effect at 24 h.

OBJECTIVE: The aim of this study was to investigate the physicochemical stability of morphine-bupivacaine-ziconotide mixtures used in intrathecal analgesia in polypropylene syringes and intrathecal pumps.
METHODS: The stability study method was conceived according to International Council for Harmonisation guidelines. For propylene syringes, six different mixtures of morphine-bupivacaine and ziconotide were assessed over seven days. Two storage temperatures were tested (5 °C ± 3 °C and 25 °C ± 2 °C). For implantable pumps, nine different mixtures were assessed over 60 days and stored at 37 °C. Assays were performed using ultrahigh-pressure liquid chromatography. Turbidity and pH also were measured throughout the study.
RESULTS: Results confirmed excellent physicochemical stability for morphine and bupivacaine in the study for all conditions investigated (pumps at 37 °C, polypropylene syringes at 5 °C ± 3 °C and 25 °C ± 2 °C). Concerning ziconotide, after seven days, our study showed that every 95% confidence interval calculated had lower bounds >90% for all mixtures stored in polypropylene syringes. In implantable pumps, a decrease of the concentration was observed in all the mixtures studied. Moreover, the appearance of a degradation product confirmed the ziconotide degradation.
CONCLUSIONS: All results are in favor with a physicochemical stable preparation for six mixture profiles when stored in polypropylene syringes at 5 °C ± 3 °C and 25 °C ± 2 °C. For mixtures stored in implantable pumps, the efficacy should decrease over time owing to the degradation of ziconotide. A trade-off between high morphine concentration and increased refill interval will need to be found by clinicians.

The administration of hydrophilic therapeutics has always been a great challenge because of their low bioavailability after administration. For this purpose, W/O/W microemulsion resulted to be a potential successful strategy for the delivery of hydrophilic compounds, interesting for the nasal mucosal therapy. Herein, an optimized biphasic W/O microemulsion was designed, through a preliminary screening, and it was inverted in a triphasic W/O/W microemulsion, intended for the nasal administration. In order to enhance the mucosal retention, surface modification of the biphasic W/O microemulsion was performed adding didodecyldimethylammonium bromide, and then converting the system into a cationic triphasic W/O/W microemulsion. The developed samples were characterized in terms of droplet size, polydispersity, zeta potential, pH and osmolality. The physical long-term stability was analyzed storing samples at accelerated conditions (40 ± 2 °C and 75 ± 5 % RH) for 6 months in a constant climate chamber, following ICH guidelines Q1A (R2). In order to verify the potential retention on the nasal mucosa, the two triphasic systems were analyzed in terms of mucoadhesive properties, measuring the in vitro interaction with mucin over time. Furthermore, fluorescein sodium salt was selected as a model hydrophilic drug to be encapsulated into the inner core of the two triphasic W/O/W microemulsions, and its release was analyzed compared to the free probe solution. The cytocompatibility of the two platforms was assessed on two cell lines, human fibroblasts HFF1 and Calu-3 cell lines, chosen as pre-clinical models for nasal and bronchial/tracheal airway epithelium.

The most common influenza vaccines are inactivated viruses produced in chicken eggs, which is a time-consuming production method with variable efficacy due to mismatches of the vaccine strains to the dominant circulating strains. Subunit-based vaccines provide faster production times in comparison to the traditional egg-produced vaccines but often require the use of an adjuvant to elicit a highly protective immune response. However, the current FDA approved adjuvant for influenza vaccines (MF59) elicits a primarily helper T-cell type 2 (Th2)-biased humoral immune response. Adjuvants that can stimulate a Th1 cellular response are correlated to have more robust protection against influenza. The cyclic dinucleotide cGAMP has been shown to provide a potent Th1 response but requires the use of a delivery vehicle to best initiate its signalling pathway in the cytosol. Herein, acetalated dextran (Ace-DEX) was used as the polymer to fabricate microparticles (MPs) via double-emulsion, electrospray, and spray drying methods to encapsulate cGAMP. This study compared each fabrication method\'s ability to encapsulate and retain the hydrophilic adjuvant cGAMP. We compared their therapeutic efficacy to Addavax, an MF59-like adjuvant, and cGAMP Ace-DEX MPs provided a stronger Th1 response in vaccinated BALB/c mice. Furthermore, we compared Ace-DEX MPs to spray dried MPs composed from a commonly used polymer for drug delivery, poly(lactic-co-glycolic acid) (PLGA). We observed that all Ace-DEX MPs elicited similar humoral and cellular responses to the PLGA MPs. Overall, the results shown here indicate Ace-DEX can perform similarly to PLGA as a polymer for drug delivery and that spray drying can provide an efficient way to produce MPs to encapsulate cGAMP and stimulate the immune system.