BACKGROUND: The aim of this study was to evaluate the interobserver reliability of measurements of the Acromiohumeral Distance (AHD) first described by Golding et al., the Critical Shoulder Angle (CSA), the Acromion Index with Glenoid Humeral (GH) and Glenoid Acromial (GA) distances, following the measuring method by Nyffeler et al., the Lateral Acromion Angle (LAA), as well as the morphology of the acromion according to Bigliani and the humeral head position according to Maloney in X-rays and MRI. Furthermore, the study assessed the correlation of measurement results in X-ray with those in MRI for AHD, CSA, GA, GH, AI, and LAA.
METHODS: A total of 187 patients who underwent shoulder joint X-ray and MRI examinations from 09/2016 to 05/2023 were included in the study. Patients with poor imaging quality, arthrosis or radical prior surgeries, like shoulder prosthetic surgery, status post humerus fractures, that have undergone surgery and therefore changed the anatomical features were excluded, what lead to a total study population of 78. X-ray measurements were performed by two observers in the true anteroposterior view, so that the humeral head and the glenoid are shown without overlap, providing a clear view into the joint space. MRI measurements were performed in oblique coronal MRI slices, using the most accurately depicted glenoid surface as a landmark.
RESULTS: Interobserver measurement results showed a significance with p < 0.001 for the assessment of acromion type according to Bigliani, humeral head offset assessment according to Maloney, and AHD. No significance was found for interobserver reliability in measuring LAA. Additionally, there was a high correlation of measurement results in X-ray with measurements in MRI for, CSA, GH/GA, and consequently AI, a good correlation for AHD but no correlation could be shown for LAA.
CONCLUSIONS: These findings provide valuable insights into the robustness of radiological parameters for evaluating shoulder pathology, offering promising prospects for clinical applications and further research. Nevertheless, the specific methodological considerations and patient characteristics should be taken into account when interpreting the results to ensure their accurate application in clinical practice.

The position of the pelvis in the sagittal plane can vary considerably between different functional positions. Adapting the position of the acetabular cup in relation to the alignment between the spine and the hip of each individual, prior to prosthesis placement, can prevent the risk of prosthetic impingement. Taken individually, risk factors for unfavorable spinopelvic kinematics can be difficult to interpret when trying to precisely predict which patients are at risk. Furthermore, the use of classifications or algorithms can be complex, most often associated with limited values and often difficult to apply in current practices of risk assessment.
We hypothesized that the deconstruction of the data matrix including age and spinopelvic parameters (SPT, LL, PI, LF and PI-LL) correlated with the analysis of spinopelvic kinematics could be used to define an individualized hip-spine relationship.
We applied archetypal analysis, which is a probabilistic, data-driven and unsupervised approach, to a complete phenotype cohort of 330 patients before total hip arthroplasty to define the spinopelvic profile of each individual using the spinopelvic parameters without threshold value. For each archetype, we analyzed the spinopelvic kinematics, not implemented in the creation of the archetypes.
An unsupervised learning method revealed seven archetypes with distinct spinopelvic kinematic profiles ranging from -8.9 ° to 13.15 ° (p = 0.0001) from standing to sitting and -5. 35 ° to -10.81 ° (p = 0.0001) from supine to standing. Archetype 1 represents the \"ideal\" patient (A1); young patients without spinopelvic anomaly and the least at risk of mobility anomaly. Followed by 3 archetypes without sagittal imbalance according to their lumbar lordosis and pelvic incidence, from the highest to the lowest (archetypes 2-4), archetype 4 exposing a greater risk of spinopelvic kinematic anomaly compared to others. Then 2 archetypes with sagittal imbalance: archetype 5, with an immobile pelvis in the horizontal plane from standing to sitting position in anterior tilt and archetype A6, with significant posterior pelvic tilt standing, likely compensating for the imbalance and associated with the greatest anomaly of spinopelvic kinematics. Finally, archetype 7 with the stiffest lumbar spine without sagittal imbalance and significant unfavorable kinematics from standing to sitting.
An archetypal approach to patients before hip replacement can refine diagnostic and prognostic features associated with the hip-spine relationship and reduced heterogeneity, thereby improving spinopelvic characterization. This risk stratification of spinopelvic kinematic abnormalities could make it possible to target patients who require adapted positioning or types of implants before prosthetic surgery.
IV retrospective study.

BACKGROUND: In total hip arthroplasty via the direct anterior approach, appropriate exposure is critical to allow preparation of the femur. The objective of this study was to explore the optimal soft tissue releases needed to allow broaching of the femur through a combination of experimental tests and computer simulations.
METHODS: Fourteen full-body cadaveric specimens were included in this study. Total hip arthroplasty was performed via the direct anterior approach with the femur at 20° adduction and 20°extension. Soft tissue releases were performed sequentially, namely, the transverse iliofemoral ligament, descending iliofemoral ligament, ischio-femoral ligament, conjoint tendon, and obturator externus. After each release, the femur mobility was assessed by applying a 6 Nm external rotation torque and a 120 N distraction force. Subsequently, using specimen-specific models and models of the broach and handle, the broach passage after each release was simulated, and the release that allowed broach passage was analyzed.
RESULTS: The average external rotation after releasing the transverse and descending iliofemoral ligaments increased by 14.1° ± 6.1° and 13.8° ± 5.3°. With subsequent soft tissue releases, the rotational mobility increased incrementally, though the impact decreased. Impingement between the broach passage and the pelvis was mainly at the anterior superior iliac spine and the anterior inferior iliac spine. The volume of impingement decreased from 4.8 ± 4.5 cm3 after resection of the femoral head to 1.8 ± 1.6 cm3 and 1.2 ± 1.9 cm3 after release of the transverse and descending iliofemoral ligament, respectively.
CONCLUSIONS: With sequential soft-tissue releases, the femur mobility increased incrementally. However, the number of releases needed for each femur varied extensively between specimens. Most (10/14) femurs became accessible after the release of the ilio-femoral or ischio-femoral ligament.

OBJECTIVE: To evaluate the current evidence comparing low level to high level laser therapy to reveal any superiorities in the treatment of musculoskeletal disorders.
METHODS: Five databases were searched till September 2022 to obtain relevant RCTs comparing high intensity and low-level laser therapies in the management of musculoskeletal disorders. Two authors assessed the methodological quality of the included studies using the Physiotherapy Evidence Database scale and meta-analysis was conducted for studies that showed homogeneity.
RESULTS: Twelve articles were included in this systematic review with a total population of 704 participants across various musculoskeletal pathologies including tennis elbow, carpal tunnel syndrome, chronic non-specific low back pain, knee arthritis, plantar fasciitis, and subacromial impingement. There were no statistical differences between the two interventions in pain, electrophysiological parameters, level of disability, quality of life, postural sway or pressure algometer, however, Low level laser therapy showed superiority in increasing grip strength compared to high intensity laser therapy while results were significant in favour of high intensity laser therapy regarding long head of biceps diameter and cross sectional area, supraspinatus thickness and echogenicity and acromio-humeral distance.
CONCLUSIONS: The current literature suggests no superiority of both types of laser therapy in musculoskeletal disorders, however, more RCTs with larger sample size are required to reach a definitive conclusion regarding the superiority of either form of laser therapy in musculoskeletal disorders.

UNASSIGNED: This study aimed to demonstrate the feasibility of lag screw exchange for painful lateral soft tissue impingement in patients initially treated with cephalomedullary nailing (CMN) for an intertrochanteric hip fracture.
UNASSIGNED: Ten patients initially treated with CMN for unstable intertrochanteric fractures presenting with persistent pain and radiographic evidence of lag screw lateral migration were treated with exchange of original screw with shorter lag screw buried in the lateral cortex to prevent impingement. Patients were evaluated for resolution of pain and achievement of pre-fracture ambulatory status at 6 months post-operatively.
UNASSIGNED: Average age was 71.5 years (range: 62-88). Average length of follow-up was 24.9 months. All patients were female, with an average Charlson Comorbidity Index of 1.0 (0-3) and average Body Mass Index of 22.2 (16.0-31.1). Five of ten patients (50.0%) were treated with a cortisone injection in the trochanteric bursa prior to screw exchange with temporary pain relief. Five (50.0%) patients presented with limited range of hip motion. Five (50.0%) had history of prior or current bisphosphonate use. Average lag screw prominence was noted to be 12.2mm (7.9-17.6mm) on radiographic evaluation. Screw exchange was performed at an average of 18.6 months (5.4-44.9 months) following the index procedure. Average operating time of the screw exchange procedure was 45.3 minutes (34-69 minutes) and blood loss was <50mL in all cases. Replacement lag screws were an average of 16.0mm (10-25mm) shorter than the initial screw. All patients achieved complete or significant resolution of lateral thigh pain, and nine (90%) returned to pre-fracture ambulatory status by eight weeks after screw exchange. All patients remained pain free at six months after screw exchange.
UNASSIGNED: Lag screw exchange is a efficacious method to address the mechanical irritation of laterally protruding lag screws following IT hip fracture, while also prophylaxing against subsequent femoral neck fractures. Level of Evidence: IV.

UNASSIGNED: The growing adoption of robotic-assistance during total hip arthroplasty (THA) has provided novel means through which a patient\'s anatomy and dynamic spinopelvic relationship can be incorporated into surgical planning. However, the impact of enhanced technologies on intraoperative decision-making and changes to component positioning has not yet been described.
UNASSIGNED: A multicentre, prospective study included 105 patients (52% women) patients who underwent robotic-assisted THA with the integration of software that incorporates a patient\'s pelvic tilt (PT) and virtual range-of-motion (VROM) for impingement modeling. The primary outcome of the study was the percentage of patients who underwent changes to the preoperative plan for cup position after incorporating the data from the software.
UNASSIGNED: Utilising the intraoperative VROM information, the preoperative plan for cup position was changed from the default (40° inclination and 20° anteversion) in 82/105 (78%) cases. When stratifying by spinopelvic mobility, 64% were considered normal (change ⩾ 10° and ⩽30°), 27% were stiff (change < 10°), and 9% were hypermobile (change > 30°). For all cohorts, the majority of cases (78%) deviated from the 40° inclination and 20° version target. When evaluating the proportion of cases within the Lewinnek and Callanan safe zones based on spinopelvic mobility, 19% of cases within the normal group were planned outside of both zones compared to 39% of stiff cases and 10% of hypermobile cases.
UNASSIGNED: Utilising the latest version of robotic-assisted THA software, the preoperative plan for cup position was changed in the vast majority (78%) of patients, causing substantial deviations from traditional, generic cup targets.

Psoas tendon impingement is not a frequently encountered condition, but impingement at the muscular level is not reported in the literature. The term refers to the mechanical impingement of the psoas muscle with secondary myositis. We report a case of psoas muscle impingement by a lumbar disc-osteophyte complex. This study reports on a 61-year-old female who presented to our facility complaining of severe low back pain with increased intensity in the past two weeks. Radiographic imaging and magnetic resonance imaging revealed psoas muscle impingement by lumbar disc-osteophyte. No signs of nerve compression or infection were found. The patient responded well to conservative treatment, including non-steroidal anti-inflammatory drugs and physical therapy. No studies have reported psoas impingement syndrome due to the lumbar disc-osteophyte complex. More research is needed to better understand this condition.

Introduction Acromioplasty is a widely performed procedure for various rotator cuff pathologies with good outcomes and high patient satisfaction. However, few studies have focused on its potential complications. Previous cadaveric studies have demonstrated that a considerable portion of the deltoid muscle is detached from its acromial origin following arthroscopic acromioplasty, but the clinical relevance of this muscle detachment has not been investigated. The goal of our research was to examine the influence of arthroscopic acromioplasty on abduction strength and to assess whether acromial anatomy plays a role in any potential effect. Methods From a preliminary sample of 87 individuals who were diagnosed with isolated impingement syndrome and underwent arthroscopic acromioplasty, 74 patients who met the inclusion criteria were ultimately included in the study. The patients were divided into two groups according to their acromion morphology: Bigliani type 2 (33 patients) and type 3 (41 patients). The isometric abduction strength of the two groups was measured by a handheld dynamometer (Isobex®; Cursor AG, Berne, Switzerland) at different abduction angles preoperatively and at the first, third, and sixth months following surgery and was statistically compared. Results Both groups showed reduced abduction strength postoperatively; however, the strength of abduction in the Bigliani type 3 group returned to near preoperative values in the third month. Although increased mean abduction strength was recorded at 30° abduction in the sixth month, this difference was not statistically significant (p=0.78). In the Bigliani type 2 group, compared with those in the sixth-month group, the preoperative abduction strength decreased from 8.32 kg to 6.0 kg (p = 0.047), 6.57 kg to 5.15 (p = 0.025), and 6.1 kg to 4.56 kg (p = 0.006) at 30, 60, and 90° abduction, respectively.  Conclusions Arthroscopic acromioplasty decreased isometric abduction strength in patients with a Bigliani type 2 acromion. Patients should be counseled about this loss, which might be especially important for professional athletes and heavy manual workers.

UNASSIGNED: Designed to help treat pain and loss of function after rotator cuff repair, allograft spacer procedures utilize a graft to act as a spacer in the subacromial space, decreasing pain from impingement of the greater tuberosity on the acromion at the extremes of overhead motion.
UNASSIGNED: To evaluate the biomechanical characteristics of secured versus unsecured tensor fascia lata allografts used in an allograft spacer procedure.
UNASSIGNED: Controlled laboratory study.
UNASSIGNED: A total of 8 fresh-frozen cadaveric shoulder specimens were used. There were 4 conditions tested: (1) intact rotator cuff, (2) stage III rotator cuff tear (complete supraspinatus tendon and superior one-half of the infraspinatus tendon), (3) unsecured tensor fascia lata graft, and (4) secured tensor fascia lata graft. Both superior and posterior translation of the humeral head were calculated in each condition. A 4-cm × 5-cm × 6-mm tensor fascia lata graft was used in the subacromial space to act as a spacer. Grafts were secured at the lateral edge of the native rotator cuff footprint with 2 knotless anchors.
UNASSIGNED: With unbalanced loading, both secured and unsecured grafts varied in their ability to limit superior and posterior translation at various rotation angles back to levels seen with intact rotator cuffs at 0° and 20° of abduction. During balanced loading, both unsecured and secured grafts limited superior and posterior translation more than those seen in the rotator cuff-deficient condition (P < .01) and similar to those seen in the intact condition (P > .05). The secured and unsecured grafts allowed similar amounts of translation at every position with both unbalanced and balanced loading (P > .05). Finally, total graft motion was <7 mm in all positions.
UNASSIGNED: Unsecured tensor fascia lata grafts were biomechanically equivalent to secured grafts when used during allograft spacer procedures.
UNASSIGNED: While both grafts were successful at limiting superior and posterior translation of the humeral head during early range of motion, the unsecured graft represents a cheaper, easier option to utilize during allograft spacer procedures.

Co-condensation of mixed SiGe nanoclusters and impingement of SiGe nanoclusters on a Si substrate were applied using molecular dynamics (MD) simulation in this study to mimic the fast epitaxial growth of SiGe/Si heterostructures under mesoplasma chemical vapor deposition (CVD) conditions. The condensation dynamics and properties of the SiGe nanoclusters during the simulations were investigated first, and then the impingement of transient SiGe nanoclusters on both Si smooth and trench substrate surfaces under varying conditions was studied theoretically. The results show that the mixed nanoclusters as precursors demonstrate potential for enhancing epitaxial SiGe film growth at a high growth rate, owing to their loosely bound atomic structures and high mobility on the substrate surface. By varying cluster sizes and substrate temperatures, this study also reveals that smaller clusters and higher substrate temperatures contribute to faster structural ordering and smoother surface morphologies. Furthermore, the formed layers display a consistent SiGe composition, closely aligning with nominal values, and the cluster-assisted deposition method achieves the epitaxial bridging of heterostructures during cluster impingement, highlighting its additional distinctive characteristics. The implications of this work make it clear that the mechanism of fast alloyed epitaxial film growth by cluster-assisted mesoplasma CVD is critical for extending it as a versatile platform for synthesizing various epitaxial films.