{Reference Type}: Journal Article
{Title}: Influence of repeated cut-off and rescanning on the trueness of the intraoral digital scans.
{Author}: Guo J;Lu Y;Li R;Zhou K;Ge R;Zhao D;Xia S;Wang Y;
{Journal}: J Dent
{Volume}: 150
{Issue}: 0
{Year}: 2024 Jun 22
{Factor}: 4.991
{DOI}: 10.1016/j.jdent.2024.105153
{Abstract}: OBJECTIVE: To evaluate the effects of repeated cut-off and rescan procedures on the trueness of three intraoral scanners (IOS).
METHODS: A tooth model (#16) with a standard class II cavity was prepared, and the complete-arch was scanned using a laboratory scanner (D2000, 3Shape A/S) to obtain a reference scan. Then the typodont was scanned with three IOSs (3Shape TRIOS 3, CEREC Omnicam, and Medit i500) under two rescanning strategies (full-cut and partial-cut), with varying numbers of repeated cut-off and rescanning procedures (0, 1, 3, 5, 7, or 10). The trueness discrepancy between the reference and experimental digital scan was estimated using root mean square (RMS) calculations. Three regions of interest were selected to represent the rescanning, identification, and non-rescan area. And the discrepancies were analyzed using a linear mixed model (α=0.05).
RESULTS: Cut-off and rescanning procedures significantly decreased the trueness of digital scans in all test conditions compared to the reference. However, no progressive increase in discrepancy was observed under any rescan conditions. Significant influences on trueness were found based on the IOS used, with the 3Shape system exhibiting lower RMS values. The partial-cut strategy showed lower RMS values compared to the full-cut strategy, albeit without statistical significance.
CONCLUSIONS: While repeated cut-off and rescanning procedures led to a decline in the quality of digital impressions, they did not result in discrepancy accumulation with repeated rescanning.
CONCLUSIONS: To ensure high scanning accuracy in dental practice, it is advisable to minimize the rescanning area when correcting imperfections in digital scans. Additionally, selecting an appropriate scanner can help mitigate the negative effects of the rescanning technique.