{Reference Type}: Journal Article {Title}: A water-soluble colorimetric chemosensor for sequential probing of Cu2+ and S2- and its practical applications to test strips, reversible test, and water samples. {Author}: Kim S;Jung S;Lee JJ;Kim C; {Journal}: J Inorg Biochem {Volume}: 256 {Issue}: 0 {Year}: 2024 Jul 23 {Factor}: 4.336 {DOI}: 10.1016/j.jinorgbio.2024.112568 {Abstract}: A water-soluble colorimetric chemosensor NHOP ((E)-1-(2-(2-(2-hydroxy-5-nitrobenzylidene)hydrazineyl)-2-oxoethyl)pyridin-1-ium) chloride) was developed for the sequential probing of Cu2+ and S2-. NHOP underwent a color change from pale yellow to colorless in the presence of Cu2+ in pure water. The binding ratio between NHOP and Cu2+ was confirmed to be 1:1 by the Job plot and ESI-MS (electrospray ionization mass spectrometry). The detection limit of NHOP for Cu2+ was calculated as 0.15 μM, which was far below the EPA (Environmental Protection Agency) standard (20 μM). The NHOP-coated test strip was able to easily monitor Cu2+ in real-time. Meanwhile, the NHOP-Cu2+ complex reverted from colorless to pale yellow in the presence of S2- through the demetallation. The stoichiometric ratio between NHOP-Cu2+ and S2- was determined to be 1:1 by analyzing the Job plot and ESI-MS. The detection limit of NHOP-Cu2+ for S2- was calculated as 0.29 μM, which was very below the WHO (World Health Organization) guideline (14.7 μM). NHOP successfully achieved the quantification for Cu2+ and S2- in water samples. NHOP could work as a sequential probe for Cu2+ and S2- at the biological pH range (7.0-8.4). Moreover, NHOP could successively probe Cu2+ and S2- at least three cycles because of its reversible property. The detection mechanisms of NHOP for Cu2+ and NHOP-Cu2+ for S2- were demonstrated with Job plot, ESI-MS, and DFT (density functional theory) calculations. Therefore, NHOP could work as an efficient sequential probe for Cu2+ and S2- in environmental systems.