PDF(Pubmed)
Abstract：
UNASSIGNED: This research paper investigates whether robotic total knee replacement (TKR) reduces bone resection compared to conventional TKR. While TKR is a successful procedure, revision surgery remains a challenge with up to 8.3% of all knee replacement procedures requiring revisions.
UNASSIGNED: The study retrospectively analyzed the tibial polyethylene inserts used and bone cuts made in 157 primary TKRs performed by a single surgeon. The results show that 93.3% of robotic TKRs used the base size tibial polyethylene of 9 mm, and the average distal femoral cut was 7.4 mm and the average tibial cut was 6.4 mm, with the minimum being 3 mm.
UNASSIGNED: The study suggests that robotic TKR reduces bone resection compared to conventional TKR.
UNASSIGNED: The study retrospectively analyzed the tibial polyethylene inserts used and bone cuts made in 157 primary TKRs performed by a single surgeon. The results show that 93.3% of robotic TKRs used the base size tibial polyethylene of 9 mm, and the average distal femoral cut was 7.4 mm and the average tibial cut was 6.4 mm, with the minimum being 3 mm.
UNASSIGNED: The study suggests that robotic TKR reduces bone resection compared to conventional TKR.
摘要：
■本研究论文调查了与传统TKR相比，机器人全膝关节置换（TKR）是否减少了骨切除。虽然TKR是一个成功的程序，翻修手术仍然是一个挑战,所有膝关节置换手术中有8.3%需要翻修.
■该研究回顾性分析了由一名外科医生在157个主要TKR中使用的胫骨聚乙烯插入物和骨切口。结果表明，93.3%的机器人TKR使用基础尺寸为9毫米的胫骨聚乙烯，股骨远端平均切口为7.4mm，胫骨平均切口为6.4mm，最小为3毫米。
■该研究表明，与传统TKR相比，机器人TKR减少了骨切除。
■该研究回顾性分析了由一名外科医生在157个主要TKR中使用的胫骨聚乙烯插入物和骨切口。结果表明，93.3%的机器人TKR使用基础尺寸为9毫米的胫骨聚乙烯，股骨远端平均切口为7.4mm，胫骨平均切口为6.4mm，最小为3毫米。
■该研究表明，与传统TKR相比，机器人TKR减少了骨切除。
